Dielectric properties of Bi₄Ti₃O₁₂ ceramics by impedance spectroscopic method

Abstract

Various lead-free ceramics have been investigated in search for new high-temperature dielectrics. In particular, Bi₄Ti₃O₁₂ is a type of ferroelectric ceramics, which is supposed to replace leadcontaining ceramics for its outstanding dielectric properties in the near future. Ferroelectric ceramics of Bi₄Ti₃O₁₂ made by conventional mixed oxide route have been studied by impedance spectroscopy in a wide range of temperature. X-ray diffraction patterns show that Bi₄Ti₃O₁₂ ceramics are a single-phase of ferroelectric Bi-layered perovskite structure whether it is calcined at 800 °C or after sintering production. This study focused on the effect of the grain size on the electric properties of BIT ceramics. The BIT ceramics with different grain sizes were prepared at different sintering temperatures. Grain becomes coarser with the sintering temperature increasing by 50 °C, relative permittivity and dielectric loss also change a lot. When sintered at 1 100 °C, r values peak can reach 205.40 at a frequency of 100 kHz, the minimum dielectric losses of four different frequencies make no difference, all close to 0.027. The values of E _a range from 0.52 to 0.68 eV. The dielectric properties of the sample sintered at 1 100 °C are relatively better than those of the other samples by analyzing the relationship of the grain, the internal stresses, the homogeneity and the dielectric properties. SEM can better explain the results of the dielectric spectrum at different sintering temperatures. The results show that Bi₄Ti₃O₁₂ ceramics are a kind of dielectrics. Thus, Bi₄Ti₃O₁₂ can be used in high-temperature capacitors and microwave ceramics.

Keywords

Bi₄Ti₃O₁₂ / temperature sensitivity / permittivity / loss (tanδ) / activation energy (E _a)

References

[1] Jain TA, Chen CC, Fung KZ. Effects of Bi₄Ti₃O₁₂ Addition on the Microstructure and Dielectric Properties of Modified BaTiO3 Under a Reducing Atmosphere[J]. J. Euro. Ceram. Soc., 2009, 29: 2595-2601.

[2] Zeb A, Milne SJ. Stability of High-temperature Dielectric Properties for (1-x)Ba_0.8Ca_0.2TiO_3–xBi(Mg0.5Ti0.5)O3 Ceramics[J]. J. Am. Ceram. Soc., 2013, 96: 2887-2892.

[3] Zang J, Li M, Sinclair DC, et al. Impedance Spectroscopy of (Bi1/2Na1/2) TiO₃-BaTiO₃ Ceramics Modified with (K_0.5Na_0.5)NbO₃[J]. J. Am. Ceram. Soc., 2014, 97: 1523-1529.

[4] Chen Y, Li Z, Huang HH, et al. The Carrier Transport Across Grain Boundaries in Polycrystalline Silicon Thin Film Transistors[J]. J. Wuhan University of Tech. -Mater. Sci. Ed., 2016, 31(1): 87-92.

[5] Chen H, Shen B, Xu J, et al. The Grain Size-dependent Electrical Properties of Bi₄Ti₃O₁₂ Piezoelectric Ceramics[J]. J. Alloys Compd., 2013, 551: 92-97.

[6] Huang HH, Chen Y, Li Z, et al. The Influences of Controlling Sintering Mechanism on Electrical Properties of Multilayer PTCR Chip[J]. J. Wuhan University of Tech.-Mater. Sci. Ed., 2015, 30(4): 674-678.

[7] Kalantari K, Sterianou I, Karimi S, et al. Ti-Doping to Reduce Conductivity in Bi_0.85Nd_0.15FeO₃ Ceramics[J]. Adv. Funct. Mater., 2011, 21: 3737-3743.

[8] Li M, Sinclair DC. The Extrinsic Origins of High Permittivity and Its Temperature and Frequency Dependence in Y_0.5Ca_0.5MnO₃ and La_1.5Sr_0.5NiO₄ Ceramics[J]. J. Appl. Phys., 2009, 111: 054106.

[9] Thakur P, Feteira A, Kundys B, et al. Influence of Attrition Milling on the Electrical Properties of Undoped-BaTiO3[J]. J. Euro. Ceram. Soc., 2007, 27: 2577-2589.

[10] Tan CC, Feteira A, Sinclair DC. Ba₂Bi_1.4Nb_0.6O₆: A Nonferroelectric, High Permittivity Oxide[J]. Chem. Mater., 2012, 24: 2247-2249.

[11] Li M, Feteira A, Mirsaneh M, et al. Influence of Nonstoichiometry on Extrinsic Electrical Conduction and Microwave Dielectric Loss of BaCo_1/3Nb_2/3O₃ Ceramics[J]. J. Am. Ceram. Soc., 2010, 93: 4087-4095.

[12] Chen Y, Gong SP, Zhang B, et al. The Preparation of Fine-grained Positive Temperature Coefficient Resistance with Superior Electrical Properties[J]. Microelectron Eng., 2013, 103: 106-110.

[13] Chen Y, Gong SP, Fu QY, et al. Preparation and Study on Performance of Submicron Nickel Powder for Multilayer Chip Positive Temperature Coefficient Resistance[J]. Chin. Phys. B, 2010, 19: 117301-117305.

[14] Dean JS, Harding JH, Sinclair DC. Simulation of Impedance Spectra for a Full Three-Dimensional Ceramic Microstructure Using a Finite Element Model[J]. J. Am. Ceram. Soc., 2013, 97: 1-7.

[15] Miranda L, Boulahya K, Hernando M, et al. Structure-Composition-Property Relationships of 6H-BaTi1-yCoyO3-d(0.1 y 0.4)[J]. Chem. Mater., 2011, 23: 1050-1060.

[16] Lei W, Yan Y, Wang X, et al. Improving the Breakdown Strength of (Mg_0.9Zn_0.1)₂(Ti_1-xMn_x)O₄ Ceramics with Low Dielectric Loss[J]. Ceram. Int., 2015, 41: 521-525.

[17] Li M, Pietrowski MJ, De Souza RA, et al. A Family of Oxide Ion Conductors Based on the Ferroelectric Perovskite Na_0.5Bi_0.5TiO₃[J]. Nat. Mater., 2014, 13: 31-35.

[18] Cao W Q, Liu P Z, Chen Y, et al. Effect of Hysteresis of Dipole on Remnant Polarization in Ferroelectrics[J]. Acta Phys. Sin., 2016, 65: 137701-137706.