Comparison of temperature field distribution between cement preclinkering technology and cement precalcining technology

Abstract

Through the comparison of calcination conditions between cement preclinkering technology and cement precalcining technology, we studied the characteristics of temperature field distribution of cement preclinkering technology systems including cyclone preheater, preclinkering furnace, and rotary kiln. We used numerical simulation method to obtain data of temperature field distribution.Some results are found by system study. The ratio of tail coal of cement preclinkering technology is about 70%, and raw meal temperature can reach 1070 °C. Shorter L/D kiln type of preclinkering technology can obtain more stable calcining zone temperature. The highest solid temperature of cement preclinkering technology is higher than 80 °C, and high temperature region (>1450 °C) length is 2 times, which is beneficial for calcining clinker and higher clinker quality. So cement preclinkering technology can obtain more performance temperature filed, which improves both the solid-phase reaction and liquid-phase reaction.

Keywords

cement preclinkering technology / temperature field distribution / kiln production / heat balance / solve the equation

References

[1] Li J, Hu S, Chen Xuejun. Study of a New Method for Raising NSP Kiln Production[J]. Cement Report of New Century, 2000, 1: 6-8.

[2] Wu Huiying. Numerical Simulations Study on three Dimensional Flow Field of Circular Preprecalciner Based on Computational Fluid Dynamics[D]. Kunming University of Science and Technology Kunming, 2006

[3] Zhou Yongkang. To Strengthen Predecomposition and the Production of Rotary Kiln[J]. Cement report of New Century, 2000(4): 2627

[4] Zhao yimin. Discussion on Cement Clinker Calcining System Material Pre Sintering of the Two-level Decomposition and Its Process [J]. Cement of China, 2012, 7: 45-48.

[5] Chen x, Gao zongyu. Discussion on Cement Clinker Production of Rotary Kiln by the New Dry Method[J]. Cement of China, 2004, 4: 41-42.

[6] Akin Altun I. Influence of Heating rate on the Burning of Cement Clinker[J]. Cement and Concrete Research, 1999, 29(4): 599-602.

[7] Feng Q, Zhang W, Yu Shangren. A Study on the Kinetics and some Mechanisms of Cement Clinker Formation[J]. Journal of Wuhan University of Technology, 1989, 1: 1-11.

[8] Ji S, Xu Fengjuan. Effect of Burning Method on the Forming Process of Portland Cement Clinker[J]. Journal of Wuhan University of Technology, 1991, 2: 51-57.

[9] Hu Shuguang. The Formation Mechanism of Portland Cement Clinker Minerals in Rapid Burning[J]. Journal of Wuhan University of Technology, 1992, 3: 28-34.

[10] Wang H, Wang D, Wang Binghua. Research on Relation between Melting Point of Cement Clinker and Heating Rate[J]. Journal of Wuhan University of Technology, 1996, 11(4): 7-13.

[11] Lei J, Ma Z, Feng Q, et al. Effects of Different Burning Processes on the Formation Kinetics of Cement Clinker[J]. Journal of Wuhan University of Technology-Mater. Sci. Ed., 1999, 14(3): 28-34.

[12] Hou Xingyuan. Research on Optimum L/D Ratio of Precalcining Kiln[J]. Cement Technolgoy, 1998, 1: 28-35.

[13] Hubert Ramesohl. Modern Calcining Technology of PYRORAPID Short Kiln and PYROCLON Low NOx Calciner[J]. Cement·Lime, 1994, 3: 39-42.

[14] Geoffrey H. Conroy. Two Tires are All You Need-Modern Kiln Technology[A]. IEEE, San Juan, Puerto Rico, 1995

[15] XU D, XIAO G, CHENG F, et al. Further Comments on the Progress of Science and Technology of China’s Cement Industry in 21st Century[J]. Journal of Xi’an University of Architecture &technology, 2004, 36(1): 1-11.

[16] Clinker Production Line Of Shanxi Yang Village Cement co. LTD. Running Remarkable Effect[J]. China Economic & Trade Herald, 2011, 1: 86.

[17] Guo Juneai. Study on Strength and Petrographic Structure of Clinker by Low-temperature Burning[J]. Journal of Wuhan University of Technology-Mater. Sci. Ed., 1995, 10(3): 29-36.

[18] Gao Shixiong. Fluidized Bed Clinker Calcining Method[J]. Cement Technology, 1987, 1: 3-5.

[19] Chen Min. Introdcution on Fluidized Bed Clinker Calcining Technology[J]. Cement, 1997, 1: 6-7.

[20] Xi Yaozhong. Introduction on Japan’s 200 t/d Fluidized Bed Clinker Calcining Technology[J]. Cement, 1999, 4: 47-51.

[21] Fu Zicheng. New Progress of Fluidized Bed Clinker Calcining Technology[J]. Cement Engineering, 1999, 5: 55-56.

[22] Takako Y, Tatsuo I, Tatsushi A, et al. New Clinker Formation Process by the Fluidized Bed Kiln System[J]. Cement and Concrete Research, 2000, 30(7): 1113-1120.

[23] Xing Baoying. Fluidized Bed Advanced Cement Kiln Dystems[J]. China Cement, 2003, 9: 68-69.

[24] Wang Lan, Wang Jiezeng, Tong Guishan, et al. A Method of Cement Presintering Production and Its System[P]. China, 200710147564. 8. 2007-08-27.

[25] Xu X, Wang L, QI Yanyong. Study on Influence on Clinker Burning of the Rotary Kiln L/D Ratio from Heat Transfer in Rotary Kiln[J]. Journal of Wuhan University of Technology, 2013, 35(8): 1-5.

[26] Deng f, Zhang w, Cao chunbao. Study on the Activity of Determined Products Calcined in Suspended State and Static State[J]. Bulletin of the Chinese Ceramic Society, 2011, 30(4): 974-976.

[27] Ji L, Liu T, Sun Lin. Effects of Calcining Temperature and Time on the Quality of Clinker[J]. Cement, 2010, 2: 32-33.