Performance and stability of supercapacitor modules based on porous carbon electrodes in hybrid powertrain

Abstract

Hybrid power sources have attracted much attention in the electric vehicle area. Particularly, electric-electric hybrid powertrain system consisting of supercapacitor modules and lithium-ion batteries has been widely applied because of the high power density of supercapacitors. In this study, we design a hybrid powertrain system containing two porous carbon electrode-based supercapacitor modules in parallel and one lithium ion battery pack. With the construction of the testing station, the performance and stability of the used supercapacitor modules are investigated in correlation with the structure of the supercapacitor and the nature of the electrode materials applied. It has been shown that the responding time for voltage vibration from 20 V to 48.5 V during charging or discharging process decreases from about 490 s to 94 s with the increase in applied current from 20 A to 100 A. The capacitance of the capacitor modules is nearly independent on the applied current. With the designed setup, the energy efficiency can reach as high as 0.99. The results described here provide a guidance for material selection of supercapacitors and optimized controlling strategy for hybrid power system applied in electric vehicles.

Keywords

supercapacitor modules / electric-electric hybrid powertrain / charging-discharging cycle / stability / power density

References

[1] Conway BE Electrochemical Supercapacitors: Scientific Fundamentals and Technological Applications[M], 1999 New York Plenum Publishers

[2] Staiti P, Arenillas A, Lufrano F, . High Energy Ultracapacitor Based on Carbon Xerogel Electrodes and Sodium Sulfate Dlectrolyte[J]. J. Power Sources, 2012, 214: 137-141.

[3] LIU P, TANG B, ZHAO JC, . Ordered Mesoporous Carbon/SnO₂ Composites as the Electrode Material for Supercapacitors[J]. J. Wuhan University of Technology-Mater. Sci. Ed, 2011, 26(3): 407-411.

[4] Hu L, Yu L, Zhao C, . Synthesis and Characterization of VO₂/Mesoporous Carbon Composites for Hybrid Capacitors[J]. J. Wuhan University of Technology-Mater. Sci. Ed., 2010, 25(4): 574-578.

[5] Ma C, Li YJ, Shi JL High-performance Supercapacitor Electrodes Based on Porous Flexible Carbon Nanofiber Paper Treated by Surface Chemical Ctching[J]. Chemical Engineering Journal, 2014, 249: 216-225.

[6] Lee DH, Kim US, Shin CB, . Modelling of the Thermal Behaviour of an Ultracapacitor for a 42-V Automotive Electrical System[J]. J. Power Sources, 2008, 175: 664-668.

[7] Jung DY, Kim YH, Kim SW, . Development of Ultracapacitor Modules for 42-V Automotive Electrical Systems[J]. J. Power Sources, 2003, 114: 366-373.

[8] Awerbuch JJ, Sullivan CR. Control of Ultracapacitor-Battery Hybrid Power Source for Vehicular Applications[C]. In: IEEE Conference on Global Sustainable Energy Infrastructure: Energy2030, Atlanta, GA, Nov. 17–18, 2008

[9] Cericola D, Ruch PW, Kötz R, . Simulation of a supercapacitor/Liion battery hybrid for pulsed applications[J]. J. Power Sources, 2010, 195: 2 731-2 736.

[10] Ghenaatian HR, Mousavi MF, Rahmanifar MS High performance battery-supercapacitor hybrid energy storage system based on self-doped polyaniline nanofibers[J]. Synthetic Metals, 2011, 161: 2 017-2 023.

[11] Thounthong P, Rael S, Davat B Energy Management of Fuel Cell/Battery/Supercapacitor Hybrid Power Source for Vehicle Applications[J]. J. Power Sources, 2009, 193: 376-385.

[12] Kisacikoglu MC, Uzunoglu M, Alam MS Load Sharing Using Fuzzy Logic Control in a Fuel Cell/Ultracapacitor Hybrid Vehicle[J]. Int. J. Hydrogen Energy, 2009, 34: 1 497-1 507.

[13] Li Q, Chen WR, Li YK, . Energy Management Strategy for Fuel Cell/Battery/Ultracapacitor Hybrid Vehicle Based on Fuzzy Logic[J]. Int. J. Electr. Power Energy Syst., 2012, 43: 514-525.

[14] Kuperman A, Aharon I Battery-ultracapacitor Hybrids for Pulsed Current Loads: A review[J]. Renewable and Sustainable Energy Reviews, 2011, 15: 981-992.

[15] Hochgraf CG, Basco JK, Bohn TP, . Effect of Ultracapacitor-Modified PHEV Protocol on Performance Degradation in Lithium-ion Cells[J]. J. Power Sources, 2014, 246: 965-969.

[16] Burke AF. The Present and Projected Performance and Cost of Double-Layer and Pseudo-capacitive Ultracapacitors for Hybrid Vehicle Applications[C]. In: IEEE Vehicle Power and Propulsion System Conf., Chicago, IL, Sep. 8–9, 2005

[17] Xie CJ, Ogden JM, Quan SH, . Optimal Power Management for Fuel Cell-battery Full Hybrid Powertrain on a Test Station[J]. J. Electr Power Energy Syst, 2013, 53: 307-320.

[18] Burke AF, Miller M. Supercapacitors for Hybrid-electric Vehicles: Recent Test Data and Future Projections[C]. In: Advanced Capacitor World Summit, San Diego, CA, Jul. 14–16, 2008

[19] Lu S, Corzine KA, Ferdowsi M A New Battery/Ultracapacitor Energy Storage System Design and Its Motor Drive Integration for Hybrid Electric Vehicles[J]. IEEE Transactions on Vehicular Technology, 2007, 56(4): 1 516-1 523.

[20] Shin D, Kim Y, Wang Y Constant-current Regulator-based Battery-Supercapacitor Hybrid Architecture for High-rate Pulsed Load Applications[J]. J. Power Sources, 2012, 205: 516-524.

[21] Devillers N, Jemei S, Péra MC, . Review of Characterization Methods for Supercapacitor Modelling[J]. J. Power Sources, 2014, 246: 596-608.