The influence of material related parameters on the mechanical properties of foamed asphalt mix

Abstract

By indirect tensile strength (ITS) test and unconfined compressive strength (UCS) test, the influence of various material related parameters, including asphalt foamability, aggregate temperature, mixing moisture content (MMC) and foamed asphalt (FA) content, on the mechanical properties of FA mixes was studied. The results indicated that both asphalt foamability and aggregate temperature greatly affected ITS of FA mixes. Too low aggregate temperature was unfavorable for mechanical properties of FA mixes. Foamed index alone was unfit for the evaluation of asphalt foamability. Compared with half-life, expansion ratio had more prominent influence on ITS of FA mixes. MMC had significant impact on the mechanical properties of FA mixes and should be optimized by trial and test in FA mix design. The mechanical properties of FA mix were sensitive to the change of FA content. Compared with the ITS determined with standard Marshall specimens, both the ITS and UCS determined with static compressed specimens by 15 cm diameter were more effective in terms of choosing the optimal asphalt content for FA mixes.

Keywords

road engineering / foamed asphalt mix / asphalt foamability / aggregate temperature / mixing moisture content / foamed asphalt content

References

[1] Jenkins K J Mix Design Considerations for Cold and Half-warm Bituminous Mixes with Emphasis on Foamed Bitumen[D], 2000 Cape Town University of Stellenbosch

[2] Lee D Y Treating Marginal Aggregates and Soils with Foamed Asphalt[J]. Association of Asphalt Paving Technologists, 1981, 50: 211-250.

[3] Humberto C, Franco L, Wood L E Stabilization with Foamed Asphalt Aggregates Commonly Used in Low-volume Roads[J]. Transportation Research Record, 1982, 898: 297-302.

[4] Brennen M, TIA M, Altschaefl A, . Laboratory Investigation of the Use of Foamed Bitumen for Recycled Bituminous Pavements[J]. Transportation Research Record, 1983, 911: 80-87.

[5] Chiu C T, Lewis A J N A Study on Properties of Foamed-asphalt Treated Mixes[J]. Journal of Testing and Evaluation, 2006, 34(1): 5-10.

[6] Jenkins K J, Long F M, Ebels L J Foamed Bitumen Mixes=Shear Performance?[J]. International Journal of Pavement Engineering, 2007, 8(2): 85-98.

[7] Ramanujam J M, Jones J D Characterization of Foamed-bitumen Stabilization[J]. International Journal of Pavement Engineering, 2007, 8(2): 111-122.

[8] FU Pengcheng Micromechanics of Foamed Asphalt Stabilized Materials[D], 2009 San Diego University of California

[9] Moloto P K Accelerated Curing Protocol for Bitumen Stabilized Materials[D], 2010 Cape Town University of Stellenbosch

[10] He G P, Wong W G Effects of Moisture on Strength and Permanent Deformation of Foamed Asphalt Mix Incorporating RAP Materials[J]. Construction and Building Materials, 2008, 22: 30-40.

[11] Li L H, Wang T X, Yuan K Study on Strength Characteristics of Foamed Asphalt Mixture[J]. Journal of Building Materials, 2009, 12(5): 549-553.

[12] Liu X J A Study into the Shear Properties of Foamed Mixture and Pavement Inter-layers[D], 2006 Xi’an Chang’an University

[13] Xu J Z A Study into the Technical Performance of Foamed Asphalt and Cold Recycled Foamed Asphalt Mixture[D], 2007 Xi’an Chang’an University

[14] Su J M, Fu R H, Zhou J B, . A Practical Guide to SPSS for Windows [M], 2001 Beijing Electronics Industry Press

[15] Saleh M F Effect of Rhelolgy on the Bitumen Foamability and Mechanical Properties of Foam Bitumen Stabilised Mixes[J]. International Journal of Pavement Engineering, 2007, 8(2): 99-110.

[16] Wirtgen G Wirtgen Cold Recycling Manual[M], 2004 Burbach Wirtgen GmbH

[17] Research Institute of Highway Ministoy of Transport. Specifications for Recycling Technology of Highway Asphalt Pavement[S]. JTG F 41-2008