The creep feature analysis of the high performance concrete

Abstract

In order to seek the creep change rules of used concrete with two different mix proportions, the test is carried out in the situation which is similar to that of the creation of concrete C60, and the creep test on the concrete of two different mix proportions is done under standard lab. Based on creep test of the high performance concrete, the creep degree and the creep coefficient are obtained. By comparing with the wide-adopted models of ACI209 (1997) and CEB-FIP MC90, it is found that the test result is good at its regularity and the research results offer reference to the calculating analysis of the on-the-spot experimental data.

Keywords

high performance concrete / mix proportion / creep coefficient

References

[1] Zhixiang Zhou. Advanced Reinforced Concrete Structure, 2004 Beijing: China Communications Press. (in Chinese)

[2] Zong-zhao Tang. The Creep Mechanics of Concrete and Experimental Skills, 1982 Beijing: The Publishing House of Hydraulic and Electrical Power. (in Chinese)

[3] ACI Committee 209. Prediction of Creep, Shrinkage and Temperature Effects in Concrete Structure (ACI 209R).American Concrete Institute, Farmington Hills, Mich., USA, 1992, 51–93

[4] CEB Europe International Concrete Committee.CEP-FIP Model Rules of 1990 (Concrete Structure). Translated by the Planning Branch of China Academic Architectural Study, 1991

[5] Hui-ping Yu. A Spotting Study on the Creep and the Contraction of Concrete. Railway Constructing Technology, 1997, 5: 7-10.

[6] Can-ming Chen, Wei-lan Huang, Run-jie Zhang, . A Creep Test on the Sand-added Concrete. Journal of Hydro-Science and Engineering, 2003, 3: 47-50.

[7] Ojdrovic Rasko P, Zarghamee Mehdi S. Concrete Creep and Shrinkage Prediction from Short-Term Tests. ACI Materials Journal, 1996, 93: 169-177.