Measurement and analysis of density of molten Ni−W alloys

Fang Liang , Xiao Feng , Tao Zainan , MuKai Kusuhiro

Journal of Wuhan University of Technology Materials Science Edition ›› 2005, Vol. 20 ›› Issue (3) : 84 -87.

PDF
Journal of Wuhan University of Technology Materials Science Edition ›› 2005, Vol. 20 ›› Issue (3) : 84 -87. DOI: 10.1007/BF02835036
Article

Measurement and analysis of density of molten Ni−W alloys

Author information +
History +
PDF

Abstract

The density of molten Ni-W alloys was measured with a modified pycnometric method. It is found that the density of the molten Ni-W alloys decreases with temperature rising, but increases with the increase of tungsten concentration in the alloys. The molar volume of molten Ni-W binary alloys increases with the increase of temperature and tungsten concentration. The partial molar volume of tungsten in liquid Ni-W binary alloy has been calculated approximately as (−1.59+5.64×10−3T)×10−6m3·mol−1.

Keywords

Ni-W alloy / density / modified pycnometric method / molar volume / tungsten

Cite this article

Download citation ▾
Fang Liang, Xiao Feng, Tao Zainan, MuKai Kusuhiro. Measurement and analysis of density of molten Ni−W alloys. Journal of Wuhan University of Technology Materials Science Edition, 2005, 20(3): 84-87 DOI:10.1007/BF02835036

登录浏览全文

4963

注册一个新账户 忘记密码

References

[1]

Mukai K, Xiao F, NoGi K, Li Z. Measurement of the Density of Ni−Cr Alloy by a Modified Pycnometric Method. Mater. Trans., JIM, 2004, 45(5): 2357-2363.

[2]

Fang L, Xiao F, Li Z S, Tao Z N. Density of Ni−Al Alloys in Liquid and Solid-liquid Coexistence State Measured by a Modified Pycnometric Method. J. Mater. Sci. Technol., 2004, 20(4): 405-410.

[3]

Fang L, Li Z S, Tao Z N, Xiao F. Density of Liquid Ni−Mo Alloys Measured by a Modified Sessile Drop Method. J Mater. Sci. Technol., 2004, 20(3): 287-292.

[4]

Mukai K, Xiao F., Nogi K., Li Z S. Measurement of the Density of Ni−Cr Alloy by a Modified Pycnometric Method. Mater. Trans., JIM, 2004, 45(7): 2357-2363.

[5]

Massalski T B. Binary Alloy Phase Diagrams, 1986 Metals Park: ASM. 1774-1774.

[6]

Fang L, Xiao F, Tao Z N. Measurement of Density of Molten Ni−Ta by a Modified Pycnometric Method. Rare Metal Materials and Engineering, 2005, 34(4): 521-525.

[7]

Fang L, Xiao F, Tao Z N. Density of Liquid Binary Ni−W Alloys Measured by a Modified Sessile Drop Method. Rare Metal Materials & Engineering, 2004, 33(12): 1261-1265.

[8]

Fang L, Xiao F, Tao Z N. Measurement of the Density of Molten Ni−Ta Alloy by a Modified Sessile Drop Method. J. Wuhan University of Technology-Mater. Sci. Ed., 2005, 20(2): 67-70.

[9]

Fang L, Xiao F, Li Z S, Tao Z N. Density of Ni−Al Alloys in Liquid and Solid-liquid Coexistence State Measured by a Modified Pycnometric Method. J. Mater. Sci. Technol., 2004, 20(4): 405-410.

[10]

Lide David R. CRC Handbook of Chemistry and Physics, 1997 New York: CRC Press. 4-126.

[11]

Lee Hae-Geon. Chemical Thermodynamics for Metals and Materials, 1999 London: Imperial College Press.

AI Summary AI Mindmap
PDF

85

Accesses

0

Citation

Detail

Sections
Recommended

AI思维导图

/