Effects of Wind-Wave Misalignment on a Wind Turbine Blade Mating Process: Impact Velocities, Blade Root Damages and Structural SafetyAssessment

Abstract

Most wind turbine blades are assembled piece-by-piece onto the hub of a monopile-type offshore wind turbine using jack-up crane vessels. Despite the stable foundation of the lifting cranes, the mating process exhibits substantial relative responses amidst blade root and hub. These relative motions are combined effects of wave-induced monopile motions and wind-induced blade root motions, which can cause impact loads at the blade root’s guide pin in the course of alignment procedure. Environmental parameters including the wind-wave misalignments play an important role for the safety of the installation tasks and govern the impact scenarios. The present study investigates the effects of wind-wave misalignments on the blade root mating process on a monopile-type offshore wind turbine. The dynamic responses including the impact velocities between root and hub in selected wind-wave misalignment conditions are investigated using multibody simulations. Furthermore, based on a finite element study, different impact-induced failure modes at the blade root for sideways and head-on impact scenarios, developed due to wind-wave misalignment conditions, are investigated. Finally, based on extreme value analyses of critical responses, safe domain for the mating task under different wind-wave misalignments is compared. The results show that although misaligned wind-wave conditions develop substantial relative motions between root and hub, aligned wind-wave conditions induce largest impact velocities and develop critical failure modes at a relatively low threshold velocity of impact.

Keywords

Wind turbine blade / Wind-wave misalignment / Monopile / Marine operation / Finite element analysis / T-bolt connections

References

[1] Bachynski EE, Kvittem MI, Luan C, Moan T. Wind-wave misalignment effects on floating wind turbines: motions and tower load effects. Journal of Offshore Mechanics and Arctic Engineering, 2014, 136(4): 041902

[2] Bak C, Zahle F, Bitsche R, Kim T, Yde A, Henriksen LC, Hansen MH, Natarajan A (2013) Description of the DTU 10 MW reference wind turbine, Progress report, Report-I-0092, DTU Wind Energy

[3] Barj L, Jonkman JM, Robertson A, Stewart GM, Lackner MA, Haid L, Matha D, Stewart SW (2014) Wind/wave misalignment in the loads analysis of a floating offshore wind turbine, in: 32nd ASME Wind Energy Symposium: 0363. https://doi.org/10.2514/6.2014-0363

[4] Brøndsted P, Nijssen RP (2013) Advances in wind turbine blade design and materials. Elsevier

[5] Fischer T, Rainey P, Bossanyi E, Kuhn M. Study on control concepts suitable for mitigation of loads from misaligned wind and waves on offshore wind turbines supported on monopiles. Wind Eng, 2011, 35(5): 561-573

[6] Hibbitt H, Karlsson B, Sorensen P (2016) Abaqus analysis users’ manual

[7] IEC (2005) International standard 61400-1, wind turbines, part 1: design requirements

[8] Jiang Z. The impact of a passive tuned mass damper on offshore single-blade installation. J Wind Eng Ind Aerodyn, 2018, 176: 65-77

[9] Jiang Z, Gao Z, Ren Z, Li Y, Duan L. A parametric study on the blade final installation process for monopile wind turbines under rough environmental conditions. Eng Struct, 2018, 172: 1042-1056

[10] Ketele S (2013) Detailed modeling of connections in large composite wind turbine blades. Master’s thesis, Universiteit Gent

[11] Larsen TJ, Hansen AM (2007) How 2 HAWC2, the user’s manual, Tech. rep., Risø National Laboratory

[12] Li L, Gao Z, Moan T. Joint distribution of environmental condition at five European offshore sites for design of combined wind and wave energy devices. Journal of Offshore Mechanics and Arctic Engineering, 2015, 137(3): 031901

[13] Mann J. The spatial structure of neutral atmospheric surface-layer turbulence. J Fluid Mech, 1994, 273: 141-168

[14] Martınez V, Guemes A, Trias D, Blanco N. Numerical and experimental analysis of stresses and failure in t-bolt joints. Compos Struct, 2011, 93(10): 2636-2645

[15] Molla IG (2015) Installing a blade in a wind turbine and wind turbines, US Patent App. 14/657,307

[16] Morison J, Johnson J, Schaaf S, . The force exerted by surface waves on piles. J Pet Technol, 1950, 2(05): 149-154

[17] Ren Z, Jiang Z, Skjetne R, Gao Z. Development and application of a simulator for offshore wind turbine blades installation. Ocean Eng, 2018, 166: 380-395

[18] Ren Z, Skjetne R, Gao Z, . A crane overload protection controller for blade lifting operation based on model predictive control. Energies, 2018, 12(1): 1-22

[19] Ren Z, Skjetne R, Jiang Z, Gao Z, Verma AS. Integrated GNSS/IMU hub motion estimator for offshore wind turbine blade installation. Mech Syst Signal Process, 2019, 123: 222-243

[20] Van Vledder GP (2013) On wind-wave misalignment, directional spreading and wave loads, in: ASME 2013 32nd International Conference on Ocean, Offshore and Arctic Engineering, American Society of Mechanical Engineers: V005T06A087–V005T06A087. https://doi.org/10.1115/OMAE2013-11393

[21] Velarde J (2016) Design of monopile foundations to support the DTU 10 MW offshore wind turbine, Master’s thesis, Norwegian University of Science and Technology (NTNU), Trondheim

[22] Verma AS, Vedvik NP and Gao Z (2017) December. Numerical assessment of wind turbine blade damage due to contact/impact with tower during installation. In IOP Conference Series: Materials Science and Engineering. 276(1):012–025 https://doi.org/10.1088/1757-899X/276/1/012025

[23] Verma AS, Jiang Z, Vedvik NP, Gao Z, Ren Z. Impact assessment of a wind turbine blade root during an offshore mating process. Eng Struct, 2019, 180: 205-222

[24] Verma AS, Vedvik NP, Gao Z. A comprehensive numerical investigation of the impact behaviour of an offshore wind turbine blade due to impact loads during installation. Ocean Eng, 2019, 172: 127-145

[25] Verma AS, Gao Z, Jiang Z, Zhengru R, Vedvik NP (2019c) Structural safety assessment of marine operations from a long term perspective: a case study of offshore wind turbine blade installation, 38th International Conference on Ocean, Offshore and Arctic Engineering OMAE https://doi.org/10.1115/OMAE2019-96686

[26] Verma AS, Jiang Z, Ren Z, Gao Z, Vedvik NP. Response-based assessment of operational limits for mating blades on monopile-type offshore wind turbines. Energies, 2019, 12(10): 1867

[27] Verma AS, Vedvik NP, Haselbach PU, Gao Z, Jiang Z. Comparison of numerical modelling techniques for impact investigation on a wind turbine blade. Compos Struct, 2019, 209: 856-878

[28] Verma, A.S., Zhao, Y., Gao, Z. and Vedvik, N.P., (2019f). Explicit structural response-based methodology for assessment of operational limits for single blade installation for offshore wind turbines. In Proceedings of the Fourth International Conference in Ocean Engineering (ICOE2018) (pp. 737–750). Springer, Singapore. https://doi.org/10.1007/978-981-13-3134-3_55

[29] Verma AS, Jiang Z, Gao Z, Vedvik NP. Effects of passive tuned mass damper on blade root impacts during offshore mating process. Mar Struct, 2020, 72(2020): 102778

[30] Verma AS, Castro SG, Jiang Z, Teuwen JJE (2020b) Numerical investigation of rain droplet impact on offshore wind turbine blades under different rainfall conditions: a parametric study. Composite Structures, p 112096. https://doi.org/10.1016/j.compstruct.2020.112096

[31] Wind Europe (2017a) The European offshore wind industry – key trends and statistics

[32] Wind Europe (2017b) Wind in power 2017: annual combined onshore and offshore wind energy statistics

[33] Zhou S, Shan B, Xiao Y, Li C, Hu G, Song X, Liu Y, Hu Y. Directionality effects of aligned wind and wave loads on a y-shape semi-submersible floating wind turbine under rated operational conditions. Energies, 2017, 10(12): 2097

Funding

Delft University of Technology