Hydrodynamic performance of multiple-row slotted breakwaters

Moussa S. Elbisy , Ehab M. Mlybari , Medhat M. Helal

Journal of Marine Science and Application ›› 2016, Vol. 15 ›› Issue (2) : 123 -135.

PDF
Journal of Marine Science and Application ›› 2016, Vol. 15 ›› Issue (2) : 123 -135. DOI: 10.1007/s11804-016-1358-6
Article

Hydrodynamic performance of multiple-row slotted breakwaters

Author information +
History +
PDF

Abstract

This study examines the hydrodynamic performance of multiple-row vertical slotted breakwaters. We developed a mathematical model based on an eigenfunction expansion method and a least squares technique for Stokes second-order waves. The numerical results obtained for limiting cases of double-row and triple-row walls are in good agreement with results of previous studies and experimental results. Comparisons with experimental measurements of the reflection, transmission, and dissipation coefficients (C R, C T, and C E) for double-row walls show that the proposed mathematical model adequately reproduces most of the important features. We found that for double-row walls, the C R increases with increasing wave number, kd, and with a decreasing permeable wall part, dm. The C T follows the opposite trend. The C E slowly increases with an increasing kd for lower kd values, reaches a maximum, and then decreases again. In addition, an increasing porosity of dm would significantly decrease the C R, while increasing the C T. At lower values of kd, a decreasing porosity increases the C E, but for high values of kd, a decreasing porosity reduces the C E. The numerical results indicate that, for triple-row walls, the effect of the arrangement of the chamber widths on hydrodynamic characteristics is not significant, except when kd<0.5. Double-row slotted breakwaters may exhibit a good wave-absorbing performance at kd>0.5, where by the horizontal wave force may be smaller than that of a single wall. On the other hand, the difference between double-row and triple-row vertical slotted breakwaters is marginal.

Keywords

slotted breakwaters / Stokes second-order / transmission coefficient / reflection coefficient / dissipation coefficient / horizontal wave force

Cite this article

Download citation ▾
Moussa S. Elbisy, Ehab M. Mlybari, Medhat M. Helal. Hydrodynamic performance of multiple-row slotted breakwaters. Journal of Marine Science and Application, 2016, 15(2): 123-135 DOI:10.1007/s11804-016-1358-6

登录浏览全文

4963

注册一个新账户 忘记密码

References

[1]

Ahmed HG, Schlenkhoff A, Oertel M. Stokes second-order wave interaction with vertical slotted wall breakwater, 2011, Yokohama, Japan: Coastal Structures Conference, 691-703

[2]

Balaji R, Sundar V. Theoretical and experimental investigation on the wave transmission through slotted screens. Oceanic Engineering International, 2004, 8(2): 69-90

[3]

Chakrabarti SK. Hydrodynamics of offshore structures, 1987, Southampton: Computational Mechanics Publications

[4]

Dalrymple RA, Martin PA. Wave diffraction through offshore breakwaters. Journal of Waterway, Port, Coastal and Ocean Engineering, 1990, 116(6): 727-741

[5]

Galal S. The use of permeable breakwater for sea defense and shore protection, 2002, Port Said, Egypt: Faculty of Engineering, Suez Canal University

[6]

Gardner JD, Townend IH. Slotted vertical screen breakwater, 1988, 283-298

[7]

Goda Y, Suzuki Y. Estimation of incident and reflected waves in random wave experiments. Proceeding of the 15th Costal Engineering Conference, 1976, 828-845

[8]

Isaacson M, Baldwim J, Premasiro S, Yang G. Wave interaction with double slotted barriers. Applied Ocean Research, 1999, 21(2): 81-91

[9]

Isaacson M, Premasiri S, Yang G. Wave interactions with vertical slotted barrier. Journal of Waterway, Port, Coast and Ocean Engineering, 1998, 124: 118-126

[10]

Ji CH, Suh KD. Wave interactions with multiple-row curtainwall-pile breakwaters. Coastal Engineering, 2010, 57(5): 500-512

[11]

Koraim A. Hydrodynamic characteristics of slotted breakwaters under regular waves. Journal of Marine Science and Technology, 2011, 16(3): 331-342

[12]

Kriebel DL. Vertical wave barriers: Wave transmission and wave forces. 23rd International Conference on Coastal Engineering, 1992, 1313-1326

[13]

Mansard EPD, Funke ER. The measurement of incident and reflected spectra using a least squares method. Proceedings 17th Coastal Engineering Conference, 1980, 159-174

[14]

Sarpkaya T, Isaacson M. Mechanics of wave forces on offshore structures, 1981, New York, USA: Van Nostrand Reinhold Company

[15]

Sollitt CK, Cross RH. Wave transmission through permeable breakwaters. Proceedings of the 13th Coastal Engineering Conference, Vancouver, 1972, 1827-1846

[16]

Suh KD, Jung H, Pyun CK. Wave reflection and transmission by curtainwall-pile breakwaters using circular piles. Ocean Engineering, 2007, 34(14-15): 2100-2106

[17]

Suh KD, Park WS, Park BS. Separation of incident and reflected waves in wave-current flumes. Coastal Engineering, 2001, 43(3): 149-159

[18]

Suh KD, Shin S, Cox DT. Hydrodynamic characteristics of pile-supported vertical wall breakwaters. Journal of Waterway, Port, Coast and Ocean Engineering, 2006, 132(2): 83-96

[19]

Tsinker G. Marine structures engineering specialized Applications, 1995, New York, USA: Chapman and Hall

[20]

Yu X. Diffraction of water waves by porous breakwaters. Journal of Waterway, Port, Coast and Ocean Engineering, 1995, 121(6): 275-282

[21]

Zhu ST, Chwang AT. Investigations on the reflection behaviour of a slotted seawall. Coastal Engineering, 2001, 43: 93-104

AI Summary AI Mindmap
PDF

132

Accesses

0

Citation

Detail

Sections
Recommended

AI思维导图

/