Experimental study on the resistance of a transport ship navigating in level ice

Abstract

This study investigates the resistance of a transport ship navigating in Arctic waters by conducting a series of model tests in an ice tank at Tianjin University. The laboratory-scale model ship was mounted on a rigid carriage using a one-directional load cell and then towed through an ice sheet at different speeds. We observed the ice-breaking process at different parts of the ship and motion of the ice floes and measured the resistances under different speeds to determine the relationship between the ice-breaking process and the ice resistance. The bending failure at the shoulder area was found to cause maximum resistance. Furthermore, we introduced the analytical method of Lindqvist (1989) for estimating ice resistance and then compared these calculated results with those from our model tests. The results indicate that the calculated total resistances are higher than those we determined in the model tests.

Keywords

ice model test / transport ship / ice resistance / ice-breaking process / level ice

References

[1] Edwards RY Jr, Major RA. Influence of major characteristics of icebreaker hulls on their powering requirements and maneuverability in ice. Transactions of the Society of Naval Architects and Marine Engineers, 1976, 84: 364-407

[2] Enkvist E. On the ice resistance encountered by ships operating in the continuous mode of icebreaking, 1972, Helsinki: The Swedish Academy of Engineering Sciences in Finland, 181

[3] Enkvist E. A survey of experimental indications of the relation between the submersion and breaking components of level ice resistance to ships, 1983, 484-493

[4] Ettema R, Sharifi MB, Georgakakos KP, Stern F. Chaos in continuous-mode icebreaking. Cold Regions Science and Technology, 1991, 19: 131-144

[5] Huang Y. Model test study of the nonsimultaneous failure of ice before wide conical structures. Cold Regions Science and Technology, 2010, 63(3): 87-96

[6] Huang Y, Ma JJ, Tian YF. Model tests of four-legged jacket platforms in ice: Part 1. Model tests and results. Cold Regions Science and Technology, 2013, 95: 74-85

[7] Huang Y, Yu M, Tian YF. Model tests of four-legged jacket platforms in ice: Part 2. Analyses and discussions. Cold Regions Science and Technology, 2013, 95: 86-101

[8] ITTC Test methods for model ice properties. International Towing Tank Conference, 2002

[9] Kashteljan VI, Poznyak II, Ryvlin AY. Ice resistance to motion of a ship. Sudostroyeniye, 1968

[10] Keinonen AJ, Browne R, Revill C, Reynolds A. Icebreaker characteristics synthesis, ReportTP 12812, 1996

[11] Kotras TV, Baird AV, Naegle JW. Predicting ship performance in level ice. Transactions of the Society of Naval Architects and Marine Engineers, 1983, 91: 329-349

[12] Lewis JW, Edwards RY Jr. Methods for predicting icebreaking and ice resistance characteristics of icebreakers. Transactions of the Society of Naval Architects and Marine Engineers, 1970, 78: 213-249

[13] Lindqvist G. A straightforward method for calculation of ice resistance of ships. Proceedings of the International Conference on Port and Ocean Engineering under Arctic Conditions, 1989, 722-735

[14] Milano VR. Ship resistance to continuous motion in ice. Transactions of the Society of Naval Architects and Marine Engineers, 1973, 81: 274-306

[15] Narita S, Yamaguchi M. An experimental study of hull forms for the new Japanese Antarctic observation ship, 1981, 253-271

[16] Riska K, Wilhelmson M, Englund K, Leiviskä T. Performance of merchant vessels in the Baltic, Research report No. 52, 1997

[17] Schwarz J, Jochmann P, Hoffman L. Prediction of the icebreaking performance of the German polar research vessel, 1981, 239-248

[18] Shi QZ, Huang Y, Song A. The shielding effect of multi-pile structures on ice force. China Ocean Engineering, 2004, 18(2): 197-206

[19] Spencer D, Jones SJ. Model-scale/full-scale correlation in open water and ice for Canadian Coast Guard “R-Class” icebreakers. Journal of Ship Research, 2001, 45(4): 249-261

[20] Timco G, Weeks W. A review of the engineering properties of sea ice. Cold Regions Science and Technology, 2010, 60(2): 107-129

[21] Valanto P. The resistance of ships in level ice. Transactions of the Society of Naval Architects and Marine Engineers, 2001, 109: 53-83

[22] von Bock und Polach R, Ehlers S. Heave and pitch motions of a ship in model ice: An experimental study on ship resistance and ice breaking pattern. Cold Regions Science and Technology, 2011, 68(1-2): 49-59

[23] Zhou L, Riska K, von Bock und Polach R, Moan T, Su B. Experiments on level ice loading on an icebreaking tanker with different ice drift angles. Cold Regions Science and Technology, 2013, 85: 79-93