Recent study of drag embedment plate anchors in China

Abstract

Experimental and theoretical studies of drag embedment plate anchors recently carried out in Tianjin University are summarized in this research paper, which involve a series of important topics relevant to the study of drag anchors. The techniques for measuring the trajectory and movement direction of drag anchors in soils, the techniques for measuring the moving embedment point and reverse catenary shape of the embedded drag line, the penetration mechanism and kinematic behavior of drag anchors, the ultimate embedment depth of drag anchors, the movement direction of the anchor with an arbitrary fluke section, the reverse catenary properties of the embedded drag line, the interactional properties between drag anchor and installation line, the kinematic model of drag anchors in seabed soils, and the analytical method for predicting the anchor trajectory in soils will all be examined. The present work remarkably reduces the uncertainties in design and analysis of drag embedment plate anchors, and is beneficial to improving the application of this new type of drag anchor in offshore engineering.

Keywords

drag embedment plate anchor / vertically loaded plate anchor / VLA / drag-in plate anchor / drag anchor / ultimate embedment depth / movement direction / kinematic model / penetration mechanism / kinematic behavior

References

[1] Aubeny C.P., Kim B.M., Murff J.D. Proposed upper bound analysis for drag embedment anchors in soft clay. Frontiers in Offshore Geotechnics. ISFOG 2005 — Gourvenec & Cassidy, 2005, London, UK: Taylor & Francis Group

[2] Aubeny C.P., Murff J.D., Kim B.M. Prediction of anchor trajectory during drag embedment in soft clay. International Journal of Offshore and Polar Engineering, 2008, 18(4): 314-319

[3] Aubeny C.P., Chi C. Mechanics of drag embedment anchors in a soft seabed. Journal of Geotechnical and Geoenvironmental Engineering, 2010, 136: 57-68

[4] Bang S (1994). Static mooring line configuration analysis tool. Proceedings of the Challenges and Opportunities in Marine Environment, Washington DC, USA.

[5] Bang S., Taylor R.J., Yu J. Analysis of anchor mooring lines in cohesive seafloor. Transportation Research Record, 1996, 1526: 47-56

[6] Bang S, Taylor RJ (1997). Analysis of anchor mooring lines in sands. Proceedings of the 7th International Offshore and Polar Engineering Conference, Honolulu, USA.

[7] Bang S, Richardson R (2003). Calibration of analytical solution using centrifuge model tests on mooring lines. Proceedings of the 13th International Offshore and Polar Engineering Conference, Honolulu, USA.

[8] Bang S, Cho Y, Kim YS (2003). Centrifuge model tests on mooring lines in sand. Proceedings of the 38th Symposium on Engineering Geology and Geotechnical Engineering, Reno, USA.

[9] Bissett M.J. Soil resistance to chain anchor movement, 1993, Australia: The University of Western Australia

[10] Bransby MF, O’Neill MP (1999). Drag anchor fluke-soil interaction in clays. Proceedings of the International Symposium on Numerical Models in Geomechanics (NUMOG VII), Graz, Austria.

[11] Dahlberg R (1998). Design procedures for deepwater anchors in clay. Proceedings of the 30th Annual Offshore Technology Conference, Houston, USA.

[12] Dahlberg R, Strom PJ (1999). Unique onshore tests of deepwater drag-in plate anchors. Proceedings of the 31st Annual Offshore Technology Conference, Houston, USA.

[13] Degenkamp G., Dutta A. Soil resistances to embedded anchor chain in soft clay. Journal of Geotechnical Engineering, ASCE, 1989, 115(10): 1420-1438

[14] Det Norshke Veritas (2000). Design and installation of fluke anchors in clay. Recommended Practice RP-E301, DNV RP-E301.

[15] Det Norshke Veritas (2002). Design and installation of plate anchors in clay. Recommended Practice RP-E302, DNV RP-E302.

[16] Dutta A. A simple method of analysing mooring chains with embedded anchor point. Journal of Offshore Mechanics and Arctic Engineering, 1988, 110: 71-73

[17] Elkhatib S, Lonnie B, Randolph MF (2002). Installation and pull-out capacities of drag-in plate anchors. Proceedings of the 12th International Offshore and Polar Engineering Conference, Kitakyushu, Japan.

[18] Elkhatib S, Randolph MF (2005). The effect of interface friction on the performance of drag-in plate anchors. Frontiers in Offshore Geotechnics. ISFOG 2005 — Gourvenec & Cassidy (eds), Taylor & Francis Group, London, UK.

[19] Gault JA, William RC (1974). Method for predicting geometry and load distribution in an anchor chain from a single point mooring buoy to a buried anchorage. Proceedings of the 6th Annual Offshore Technology Conference, Houston, USA.

[20] Goncalves E, Nunes Dias CA, Fernandes AO, Testa GR (2000). Verticle load anchor project. Proceedings of the 10th International Offshore and Polar Engineering Conference, Seattle, USA.

[21] Kim B.M. Upper bound analysis for drag anchors in soft clay, 2005, USA: Texas A&M University

[22] Liu H.X., Zhang W., Zhang X.W., Liu C.L. Experimental investigation on the penetration mechanism and kinematic behavior of drag anchors. Applied Ocean Research, 2010, 32(4): 434-442

[23] Liu H.X., Li Y., Yang H.T., Zhang W., Liu C.L. Analytical study on the ultimate embedment depth of drag anchors. Ocean Engineering, 2010, 37(14-15): 1292-1306

[24] Liu H.X., Zhang W., Liu C.L., Hu C. Movement direction of drag anchors in seabed soils. Applied Ocean Research, 2012, 34: 78-95

[25] Liu H.X., Liu C.L., Yang H.T., Li Y., Zhang W., Xiao Z.J. A novel kinematic model for drag anchors in seabed soils. Ocean Engineering, 2012, 49: 33-42

[26] Li Y. Reverse catenary equation of the drag line and its application to the kinematic model of drag anchors, 2010, China: Tianjin University

[27] Miedema SA, Lagers GHG, Kerkvliet J (2007). An overview of drag embedded anchor holding capacity for dredging and offshore applications. WODCON XVIII, Orlando, USA.

[28] Murff JD, Randolph MF, Elkhatib S (2005). Vertically loaded plate anchors for deepwater applications. Frontiers in Offshore Geotechnics: ISFOG 2005 — Gourvenec & Cassidy (eds), Taylor & Francis Group, London, UK.

[29] Naval Civil Engineering Laboratory (1987). Drag embedment anchors for navy moorings. Techdata Sheet 83-08R, Port Hueneme, California, USA.

[30] Neubecker SR, Randolph MF (1994). Model testing and theoretical analysis of drag anchors in sand. Proceedings of the 1994 International Conference on Centrifuge, Singapore.

[31] Neubecker S.R., Randolph M.F. Profile and frictional capacity of embedded anchor chain. Journal of the Geotechnical Engineering Division, 1995, 121(11): 797-803

[32] Neubecker SR, Randolph MF (1995b). Performance of embedded anchor chains and consequences for anchor design. Proceedings of the 27th Annual Offshore Technology Conference, Houston, USA.

[33] Neubecker S.R., Randolph M.F. The kinematic behavior of drag anchors in sand. Canadian Geotechnical Journal, 1996, 33: 584-594

[34] Neubecker S.R., Randolph M.F. The performance of drag anchor and chain system in cohesive soil. Marine Georesouces and Geotechnology, 1996, 14: 77-96

[35] Nunes Dias CA, Goncalves E, Garcia Domingez MA, Fernandes AO (2000). Tracker monitor device for VLA embedment. Proceedings of the 10th International Offshore and Polar Engineering Conference, Seattle, USA.

[36] O’Neill MP, Randolph MF, Neubecker SR (1997). A novel procedure for testing model drag anchors. Proceedings of the 7th International Offshore and Polar Engineering Conference, Honolulu, USA.

[37] O’Neill MP, Randolph MF, House AR (1999). The behaviour of drag anchors in layered soils. Proceedings of the 9th International Offshore and Polar Engineering Conference, Brest, France.

[38] O’Neill M.P., Randolph M.F. Modelling drag anchors in a drum centrifuge. International Journal of Physical Modelling in Geotechnics, 2001, 2: 29-41

[39] O’Neill M.P., Bransby M.F., Randolph M.F. Drag anchor fluke-soil interaction in clays. Canadian Geotechnical Journal, 2003, 40: 78-94

[40] Reese LC (1973). A design method for an anchor pile in a mooring system. Proceedings of the 5th Annual Offshore Technology Conference, Houston, USA.

[41] Ruinen RM, Degenkamp G (2001). Anchor selection and installation for shallow and deepwater mooring systems. Proceedings of the 11th International Offshore and Polar Engineering Conference, Stavanger, Norway.

[42] Ruinen RM, Degenkamp G (2002). Prediction of the holding capacity and trajectory of drag embedment anchors. Proceedings of the 34th Annual Offshore Technology Conference, Houston, USA.

[43] Ruinen RM (2004). Penetration analysis of drag embedment anchors in soft clay. Proceedings of the 14th International Offshore and Polar Engineering Conference, Toulon, France.

[44] Stewart WP (1992). Drag embedment anchor performance prediction in soft clay. Proceedings of the 24th Annual Offshore Technology Conference, Houston, USA.

[45] Thorne C.P. Penetration and load capacity of marine drag anchors in soft clay. Journal of Geotechnical and Geoenvironmental Engineering, 1998, 124: 945-953

[46] Vivatrat V, Philip JV, Albert AP (1982). The influence of chain friction on anchor pile design. Proceedings of the 14th Annual Offshore Technology Conference, Houston, USA.

[47] Vryhof Anchors Anchor manual, 1990, The Netherlands: Krimpen ad Yssel

[48] Vryhof Anchors Anchor manual, 2005, The Netherlands: Krimpen ad Yssel

[49] Zhang W. Penetration mechanism and kinematic behavior of drag anchors, 2011, China: Tianjin University

[50] Zhang W., Liu H.X., Zhou H.F., Sheng Z.G. A new technique to measure the trajectory of drag anchors in soils. Geotechnical Testing Journal, 2011, 34(4): 279-287