The stress combination method for the fatigue assessment of the hatch corner of a bulk carrier based on equivalent waves

Abstract

The stress combination method for the fatigue assessment of the hatch corner of a bulk carrier was investigated based on equivalent waves. The principles of the equivalent waves of ship structures were given, including the determination of the dominant load parameter, heading, frequency, and amplitude of the equivalent regular waves. The dominant load parameters of the hatch corner of a bulk carrier were identified by the structural stress response analysis, and then a series of equivalent regular waves were defined based on these parameters. A combination method of the structural stress ranges under the different equivalent waves was developed for the fatigue analysis. The combination factors were obtained by least square regression analysis with the stress ranges derived from spectral fatigue analysis as the target value. The proposed method was applied to the hatch corner of another bulk carrier as an example. This shows that the results from the equivalent wave approach agree well with those from the spectral fatigue analysis. The workload is reduced substantially. This method can be referenced in the fatigue assessment of the hatch corner of a bulk carrier.

Keywords

stress combination method / equivalent wave / bulk carrier / hatch corner / fatigue strength assessment / ship structures

References

[1] ABS Rules for building and classing steel vessels, 2002, Houston, USA: American Bureau of Shipping, 121-129

[2] CCS Guidelines for the fatigue strength of ship structures, 2007, Beijing, China: China Communication Press, 8-19

[3] Chen C.H., Zhong W.F. Calculation of the design wave load of a container ship structure. Journal of Huazhong University of Science and Technology, 2008, 36(10): 110-113

[4] Dai Y., Shen J., Song J. Ship wave loads, 2007, Beijing, China: National Defense Industry Press, 164-166

[5] DNV Fatigue assessment of ship structure, 2001, HØvik, Norway: Det Norske Veritas, 163-171

[6] Feng G. Fatigue assessment methods for ship structures, 2006, Harbin: Harbin Engineering University, 5-21

[7] Feng G., Ren H. Design wave approach for the fatigue assessment of ship structures. Journal of Harbin Engineering University, 2005, 26(4): 430-434

[8] Feng G., Ren H., Li H., Chen B. Overall strength assessment of semi-submersible platform structures based on direct calculation. Journal of Harbin Engineering University, 2009, 30(3): 255-261

[9] GL Rule for classification and construction, 2000, Hamburger, Germany: Germanischer Lloyd, 153-162

[10] Gu Y., Teng X., Dai L., Hu R. Long term prediction of wave loading and bending-torsion strength analysis of open hatch ship on entire ship finite element model. Shipbuilding of China, 1998, 141(2): 63-70

[11] Hansen P.F., Winterstein S.R. Fatigue damage in the side shells of ships. Marine Structures, 1995, 8(6): 631-655

[12] Hu Y., Chen B. Fatigue reliability analysis of the ship and ocean engineering structures, 1996, Beijing, China: China Communication Press

[13] IACS Common structural rules for bulk carriers, 2006, Beijing, China: International Association of Classification Society, 220-225

[14] Soares G.C., Moan T. Model uncertainty in the long-term distribution of wave-induced bending moments for fatigue design of ship structures. Marine Structures, 1991, 4: 295-315

[15] Wang Y. Discussion on the parameters of design waves. Journal of Marine Science and Application, 2008, 7(3): 162-167

[16] Zhan Z., Cui W., Gu Y. Permissible stress method for fatigue strength of ship hull structure based on EDW. Journal of Ship Mechanics, 2009, 13(6): 923-933

[17] Zhan Z., Gu Y. The design wave for the direct calculation of ship hull structures. Ship and Ocean Engineering, 2002, 146(3): 14-16