Optimization design of vibration characteristics of ship composite brace with rigid vibration isolation mass

Abstract

In considering the theory of structural dynamic optimization design, a design method of the structural style of ship composite brace with rigid vibration isolation mass was studied. Two kinds of structural dynamic optimization formulations minimizing the vibration acceleration of the non-pressure hull on the restraining condition of the gross weight of the ship cabin were established: 1) dynamic optimization of the sectional dimensions of the rigid vibration isolation mass in the composite brace; 2) dynamic optimization of the arranging position of the rigid vibration isolation mass. Through the optimization results, sectional dimensions and the arranging position of the rigid vibration isolation mass with better performance in reducing vibration were gained, and some reference was provided for practical engineering designs as well as enrichment of the design method of a novel ship vibration-isolation brace.

Keywords

rigid vibration isolation mass / composite brace / impedance mismatch / optimization design / vibration and noise reduction

References

[1] Chen M., Jin B., Chen L. Optimization design of static and dynamic characteristics of stiffened cylindrical shells based on APDL. Ship Science and Technology, 2008, 30(3): 64-68

[2] Guo F., Yang D. Optimization design of the gearbox mounting under vibration level difference constraints. Ship Engineering, 2008, 30(4): 1-4

[3] Hu Z., Leng J. Analysis of mechanism isolation vibration and transmitting of warships structure vibration wave by quadrate steel. Mechanical and Electrical Equipment, 2008, 25(4): 44-47

[4] Li T., Zhang X. Vibrational power flow analysis on combined plates partially covered layer of discontinuous material. Acta Acustica, 1997, 22(3): 274-281

[5] Liu X., He Q., Liu Y. Optimal design of wheel cross-sectional shapes of qianmen dangdangche for decreasing vibration and noise. Journal of Beijing Jiaotong University, 2010, 34(1): 145-148

[6] Njifulov A.C. Ship structure acoustic design, 1998, Beijing: National Defence Industry Press, 153-167

[7] Norton M.P. Fundamentals of noise and vibration analysis for engineers, 1993, Beijing: Aviation Industry Press, 120-135

[8] Pan J., Wang D. Topology optimization of truss structure under dynamic response constraints. Journal of Vibration and Shock, 2006, 25(4): 8-12

[9] Shi M., Zhang J., Fang J. Study of vibration and noise reduction by minimizing vibration velocity for plate based on FEM/BEM. Journal of Dalian Jiaotong University, 2009, 30(2): 1-5

[10] Shu L., Fang Z., Zhao G.-j. Topology optimization design for noise reduction in a truck cab interior. Journal of Vibration and Shock, 2008, 27(3): 113-116

[11] Wang Y., Chen G., Hua H. Optimal design of ship floating raft system power equipment. Shipbuilding of China, 2001, 42(1): 45-49

[12] Yang D., Guo F. Topological optimal design of a gearbox mounting with vibration level difference constraints. Journal of Vibration and Shock, 2008, 27(6): 173-177

[13] Yang D., Liu Y., Jin X.-d. Structural topology optimal design to reduce vibration and noise of thin plate. Journal of Ship Mechanics, 2003, 7(4): 91-96

[14] Yao X., Qian D., Zhang A. Research on the vibration passing and near-field acoustic radiation of double cylindrical shell. Technical Acoustics, 2007, 26(6): 1226-1234

[15] Zhou G.-p., Liang Z., Liang M. Modal analysis and optimization of cylinder-shell circular ultrasonic plastic welding tool. Technical Acoustics, 2009, 28(4): 560-563

[16] Zhu S., He L. Vibration control of onboard machinery, 2003, Beijing: National Defence Industry Press, 115-129