A method of multi-channel reference signals acquiring in broadband ANC

Ling-kun Ma , Jian-guo Huang , Li-jie Zhang

Journal of Marine Science and Application ›› 2008, Vol. 7 ›› Issue (3) : 190 -194.

PDF
Journal of Marine Science and Application ›› 2008, Vol. 7 ›› Issue (3) : 190 -194. DOI: 10.1007/s11804-008-7094-9
Article

A method of multi-channel reference signals acquiring in broadband ANC

Author information +
History +
PDF

Abstract

In a flank array on an unmanned underwater vehicle (UUV), self-generated noise which has broadband and colored spectrum property in frequency and spatial domain is the main factor affecting the performance of weak signal detection, so the technique of adaptive noise cancellation (ANC) as well as physical denoising and active noise cancellation are often used in practice. Because ANC is based on correlations, improvements in performance come from better correlation between reference signals and primary signals. Taking full advantage of the characteristics of flank arrays and the characteristics of information obtained from hydrophones, a new method for reference signal acquisition for adaptive noise cancellation is proposed, in which the multi-channel reference signals are obtained by accurate delaying for a given direction of arrival (DOA) and differencing between adjacent outputs of array elements. The validity of the proposed method was verified through system modeling simulations and lake experiments which showed good performance with little additional computational burden.

Keywords

weak signal detection / adaptive noise cancellation / multi-channel reference signal

Cite this article

Download citation ▾
Ling-kun Ma, Jian-guo Huang, Li-jie Zhang. A method of multi-channel reference signals acquiring in broadband ANC. Journal of Marine Science and Application, 2008, 7(3): 190-194 DOI:10.1007/s11804-008-7094-9

登录浏览全文

4963

注册一个新账户 忘记密码

References

AI Summary AI Mindmap
PDF

96

Accesses

0

Citation

Detail

Sections
Recommended

AI思维导图

/