Design and research on a variable ballast system for deep-sea manned submersibles

Abstract

Variable ballast systems are necessary for manned submersibles to adjust their buoyancy. In this paper, the design of a variable ballast system for a manned submersible is described. The variable ballast system uses a super high pressure hydraulic seawater system. A super high pressure seawater pump and a deep-sea brushless DC motor are used to pump seawater into or from the variable ballast tank, increasing or decreasing the weight of the manned submersible. A magnetostrictive linear displacement transducer can detect the seawater level in the variable ballast tank. Some seawater valves are used to control pumping direction and control on-off states. The design and testing procedure for the valves is described. Finally, the future development of variable ballast systems and seawater hydraulic systems is projected.

Keywords

deep-sea / manned submersible / variable ballast system / weight / seawater pump / seawater hydraulic system

References

[1] CUI Weicheng, XU Qinan. Introduction to the Development of a 7000m manned submersible[C]//The Post-Symposium Workshop of Underwater Technology, Shanghai, 2007: 10–16.

[2] Nanba N. Development of Deep Submergence Research Vehicle “SHINKAI 6500”[J]. Mitsubishi Heavy Industries Ltd. Technical Review, 1990, 27(3): 51-55

[3] Mavor J. W. 6000-Ft submergence research vehicle[J]. The Society of Naval Architects and Marine Engineers, 1966, 74: 106-149

[4] Aerospace News, Seawater piston pump has ceramic cylinder pistons and ceramic cylinder liners[J]. Hydraulics & Pneumatics, 1975, 28(8): 132–136.

[5] Takaga W. On the development of sea water pump for “Shinkai 6500”[J]. JAMSTEC R., 1999, 23: 100-105

[6] Tecnadyne Company. Underwater motor products[EB/OL]. 2007-10-11. http://www.tecnadyne.com/rotact.htm.

[7] Yang S., Li Z. Seawater hydraulic drive and its application in ocean exploitation[J]. Ocean Engineering, 2000, 18(1): 81-85