A method based on potential theory for calculating air cavity formation of an air cavity resistance reduction ship

Abstract

This research is intended to provide academic reference and design guidance for further studies to determine the most effective means to reduce a ship’s resistance through an air-cavity. On the basis of potential theory and on the assumption of an ideal and irrotational fluid, this paper drives a method for calculating air cavity formation using slender ship theory then points out the parameters directly related to the formation of air cavities and their interrelationships. Simulations showed that the formation of an air cavity is affected by cavitation number, velocity, groove geometry and groove size. When the ship’s velocity and groove structure are given, the cavitation number must be within range to form a steady air cavity. The interface between air and water forms a wave shape and could be adjusted by an air injection system.

Keywords

air cavity resistance reduction / forming of air cavity / potential theory / cavitation number

References

[1] Hartmut H. H. A simple model for gas bubble drag reduction[J]. Physics of Fluids, 1984, 27(12): 2788-2790

[2] Brockett T. Computational method for determination of bubble distributions in liquids[R]. 1969, [S.1.]: U. S. Nav Ship Res Develop Cent

[3] Drew D. A. Mathematical modeling of two-phase flow[J]. Annual Review of Fluid Mechanics, 1983, 15: 261-291

[4] Yarin L. P., Hetsroni G. Turbulence intensity in dilute two-phase flow[J]. International Journal of Multiphase Flow, 1994, 20: 27-44

[5] Dong W. C., Guo R. X., Cheng X. L., Lu Y. S. A study on the mechanism of resistance reduction to the stepped planning craft by air injection[J]. Journal of Ship Mechanics, 2002, 6(6): 62-69

[6] Dong W. C., Guo R. X., Liu X. W. Air injection on the bottom of stepped planning craft and its effect on resistance[J]. Journal of Ship Mechanics, 2000, 4(3): 36-42

[7] McCormick M. E., Bhattacharya R. Drag reduction of a submersible hull by electrolysis[J]. Naval Engineers Journal, 1973, 85(2): 11-16

[8] Thornton W. A. Drag reduction of a hull by electrolysis[R]. 1974, [S.l.]: U.S. Naval Academy

[9] Chanqhoon L., Kim J. Control of the viscous sub layer for drag reduction[J]. Physics of Fluids, 2002, 14(7): 2523-2529

[10] GORE R, CROW C. Effect of particle size on modulating turbulent intensity[J]. International Journal of Multiphase Flow, 1989 (15): 279–285.

[11] DONG W C, GUO R X. Experimental investigation into resistance reduction of flat plate by formation of air cavity[J]. Shipbuilding of China, 1998(Suppl): 100–106(in Chinese).

[12] Dong W. C., Guo R. X. Research Progress of air injection drag reduction[J]. Journal of Ship Mechanics, 1998, 2(5): 73-78

[13] Dong W. C., Guo R. X., Liu X. W. Experimental investigation of the resistance reduction of stepped planning craft by formation of air cavity[J]. Journal of Hydrodynamics, 2002, 17(4): 440-447

[14] Cai C. F. Theoretical analysis and experimental study of micro bubbles resistance reduction[D]. 2003, Wuhan: Wuhan University of Technology

[15] Yang S. Z., Han H. S., Zhang M. G. Experimental investigation into the reduction of resistance of high speed craft by SAFACUB technique[J]. Shipbuilding of China, 1985, 91(4): 22-28

[16] Zhu Y. X., Guo R. X. Basic equation of air-water two phase flow[C]. Proceedings of 13th Sympsoium on Naval Hydrodynamics, 1994, Beijing: Ocean Press

[17] Zhu Y. X., Guo R. X. Hydroelastic analysis of structure-bubbly layer-fluid interaction problems[J]. Acta Mechanica Solida Sinica, 1996, 17(2): 157-162

[18] Cao C. Y., Wang J. M., Zhan D. X. Theoretical analysis and numerical calculation of micro bubbles resistance reduction[C]. Proceedings of 16th Symposium on Naval Hydrodynamics, 2002, Beijing: Ocean Press, 405-410

[19] LIN L M, WANG J M, ZHAN D X. Numerical simulation of flat plate with micro bubbles resistance reduction[J]. Ship&Ocean Engineering, 2001(Supp2): 55–58(in Chinese).