Numerical simulation of the anti-shock performance of a gear case

Abstract

Both sea battles and testing of ship in underwater explosions reveal unacceptably poor anti-shock performance of important shipboard equipment. Anti-shock performance of shipboard equipment is a significant factor determining fighting strength and survivability. The anti-shock performance of a shipboard gear case based on BV043/85 was investigated using numerical simulation. A geometric model of the gear case was built using MDT software and meshed in HyperMesh software, and then the finite element model of the gear case was formed. Using ABAQUS software, the anti-shock performance of the gear case was simulated. First, shock response of typical regions of gear case was determined. Next, some generalizations were made about the anti-shock performance of the gear case by analyzing the Mises stress of typical regions varied with shock inputs. Third, weak regions were determined from simulation results. The threshold values of shock resistance of the gear case at different impulse widths were obtained through interpolating the numerical simulation results selected from the most dangerous spot. This research provides a basis for further optimization of the design of gear cases.

Keywords

shipboard equipment / gear case / anti-shock / numerical simulation