The process analysis and improvement of the slender and flat shaft of track recorder

Abstract

A slender and flat shaft is a key part of the track recorder in marine vessels. However, the axial straightness of the shaft often exceeds standard measurements after it is machined. It has also been found that its precision does not last a long time. After thorough analysis of these problems the main reasons that affect machining quality are identified-and a process modification plan is put forward that meets design requirements of the shaft. The production and practice indicate that the precision of the shaft is stable for a long period and the quality of products improved substantially after new measures were employed, securing the e accuracy of the track recording of the marine vessel.

Keywords

sender and flat shaft / internal stress / straightness

References

[1] Jingwen Feng. Mechanical manufacture technology principle [M]. 2002, Beijing: Tsinghua University Press

[2] Lide Chen, Xiaohui Li. Mechanical manufacture technology [M]. 2004, Shanghai: Shanghai Jiao Tong University Press

[3] Wenxuan Xun. Mechanics of Materials [M]. 2005, Beijing: Science Press

[4] Guangli Hu, Xiwen Xie. Heat treatments principle and technology of steel [M]. 2004, Xi'an: Northwestern Polytechnical University Press

[5] Baosen Qi, Li Li, Jing Lv. Mechanical Engineering Materials [M]. 2003, Harbin: Harbin Institute of Technology Press

[6] Jingmin Sun. Modern mechanical design method [M]. 2003, Harbin: Harbin Institute of Technology Press