A new method to accurately measure the drift of shipborne floated gyro

Cheng Jian-hua; Hao Yan-ling; Huang Wei-quan; Wu Lei; Shan Dan-ping

doi:10.1007/s11804-006-0027-6

Journal of Marine Science and Application ›› 2006, Vol. 5 ›› Issue (2) : 1 -5. DOI: 10.1007/s11804-006-0027-6

Article

A new method to accurately measure the drift of shipborne floated gyro

Author information +

History +

PDF

Abstract

Shell-feeding velocity is an important factor affecting naval gun shooting capacity. An agile shell-feeding system was designed to ensure quick implementation of the shell-feeding task. Based on composition of the agile shell-feeding system, hoist technology was studied. Working principles were discussed and the hydraulic pressure system of the hois was constructed. The hydraulic pressure cylinder and the accumulator were analyzed and calculated. Finally, PRO/E and ADAMS were used to simulate the hoist and its hydraulic system. It was found that this type of virtual prototype provides a good method to actualize a physical prototype.

Keywords

shell-feeding system / naval gun hoist / accumulator

Cite this article

Download citation ▾

Cheng Jian-hua, Hao Yan-ling, Huang Wei-quan, Wu Lei, Shan Dan-ping. A new method to accurately measure the drift of shipborne floated gyro. Journal of Marine Science and Application, 2006, 5(2): 1-5 DOI:10.1007/s11804-006-0027-6

登录浏览全文

4963

注册一个新账户忘记密码

References

Publishing order | Descend order by publishing year | Descend order by cited within

[1]	Bouchard J R, Ray R E. Velocity modulation realization of gyro rotor [J]. Foreign INS and Sensor, 1981, 4: 54-56

[2]	Deming Huang, Lu Cheng. Inertial navigation system [M]. 1999, Harbin: Harbin Engineering University Press

[3]	Caii Kaishi. ZHUANG Liangjie. A method for compensating the slope drift component of gyro in an inertial Navigation system [J]. Journal of China Inertial Technology, 1992, 3: 19-21