Study of the helicopter blade running elevation measurement system

Abstract

Helicopter blade running elevation measurement is an important measure target in helicopter blade dynamic balance experimentation. The elevation influences the helicopter's security and other performance capabilities. In testing, however, it has been difficult to measure the elevation when the rotor reaches high speeds. To get a simple, fast and highly accurate measurement system, photo electricity technology was applied to measuring the blade running elevation. Discussed is the measurement principle of blade running elevation, the design of the measurement system and analysis of the measurement precision.

Keywords

helicopter / blade / blade running elevation / blade running elevation measurement / laser measurement

References

[1] Liu C Q, Liu L J. Bus controller SJA1000 of CAN and application[J]. Semiconductor Technology, 2001, 26(11): 61-66 (in Chinese)

[2] Feng J L, Liu H. J. The study of the Measure the helicopter blade running elevation[J]. Optoelectionic Technology and Information, 2005, 18(1): 42-45 (in Chinese)

[3] Muschinski A, Frehich R, Jensen M, et al. Fine-scale measurements of turbulence in the lower troposphere: an intercomparison between a kite-and Balloon-Borne, and a helicopter-borne measurement system[J]. Boundary-Layer Meteorology, 2003, 8(6): 219-250

[4] Wu K M. CAN bus principle and application system design [M]. 1996, Beijing: Beijing University of Aeronautics and Astronautics Press, (in Chinese)

[5] Lin W C, Qiao Y F. The measurement of the holicopter blade runing elevation using CCD technology [J]. Journal of Changchun Uneversity of Science and Technology, 2002, 25(4): 23-25 (in Chinese)

[6] Wu J Y, Liu Zh J, Liu F H. Improvement and design of helicopter blade running elevation measurement system[J]. Helicopter Technology, 2001, 185(1): 20-24 (in Chinese)