Novel manufacturing technology of hyperbolic plates for shipbuilding

Xu Zhang; Jia-tai Zhang; Gang Liu; S J Yuan; Z R Wang

doi:10.1007/BF02921422

Journal of Marine Science and Application ›› 2002, Vol. 1 ›› Issue (1) : 77 -80. DOI: 10.1007/BF02921422

Article

Novel manufacturing technology of hyperbolic plates for shipbuilding

Author information +

History +

PDF

Abstract

On the basis of the principle of dieless hydrobulging technology, a novel hydrobulging technology for manufacturing hyperbolic plates is proposed. First, a toroidal pipe elbow or a partial toroidal pipe elbow is formed, then the single hydrobulged structure can be cut up into some desired plates. It is proved by experiments and finite element simulation that manufacturing technology of hyperbolic plates adopting integrated hydrobulging forming technology is feasible.

Keywords

hyperbolic plates / integrally hydrobulging / toroidal pipe elbow / partial toroidal pipe elbow

Cite this article

Download citation ▾

Xu Zhang, Jia-tai Zhang, Gang Liu, S J Yuan, Z R Wang. Novel manufacturing technology of hyperbolic plates for shipbuilding. Journal of Marine Science and Application, 2002, 1(1): 77-80 DOI:10.1007/BF02921422

登录浏览全文

4963

注册一个新账户忘记密码

References

Publishing order | Descend order by publishing year | Descend order by cited within

[1]	Li Jii-de. Ship endurance wave [M]. 1981, Beijing: National Defense Industry Press

[2]	Fen Ti-Cheng. Ship sway and operation [M]. 1980, Beijing: National Defense Industry Press

[3]	Guangzhou Engineering College Shipbuilding Group Ship propeller’s design [M]. 1976, Beijing: China Communications Press

[4]	Fin Stabilizer Research Group Harbin Engineering Test data of some type fin stabilizer [R]. 1984, Harbin: Harbin shipbuilding Engineering Institute