Numerical study of flocculation settling and thickening of whole-tailings in deep cone thickener using CFD approach

Abstract

Deep cone thickener (DCT) is the key equipment in cemented paste backfill (CPB), so it is essential to study the flocculation settling and thickening characteristics of the whole-tailings in DCT. Coupled with population balance model (PBM), computational fluid dynamics (CFD) was used to study the characteristics, namely particle size distribution (PSD) and underflow concentration in DCT. Based on actual production, the effects of rake rotational speed, feed rate and tailings slurry concentration were simulated and analyzed in a certain range. The PSD varied with rake rational speed, feed rate and tailings slurry concentration almost in the same trend, but the influence of feed rate was less than that of rake rational speed and tailings slurry concentration. The underflow concentration increased at first and then declined with rake rational speed and feed rate, but it rose and fell with the tailings slurry concentration. Finally, the optimal key parameters on the flocculation settling and thickening of the whole-tailings in DCT were obtained: rake rotational speed of 17 r/min, feed rate of 3.25 m³/h and tailings slurry concentration of 20%, giving the reference values to the industrial production in Baishitamu Copper Mine.

Keywords

deep cone thickener / flocculation settling / thickening / whole-tailings / computational fluid dynamics

References

[1] CaoS, SongW-dong. Effect of filling interval time on the mechanical strength and ultrasonic properties of cemented coarse tailing backfill [J]. International Journal of Mineral Processing, 2017, 166: 62-68

[2] WuA-x, ChengH-y, YangY, ZhangL-fu. Development and challenge of paste technology in China [C]. 20th International Seminar on Paste and Thickened Tailings (Paste 2017), 2017, Beijing, China, Paste: 211

[3] WuA-x, WangY, WangH-jiang. Status and prospects of the paste backfill technology [J]. Metal Mine, 2016, 45(7): 1-9(in Chinese)

[4] ZhangQ-l, ZhouD-h, WangX-m, ZhaoJ-wen. Experimental study on flocculating sedimentation of ultra-fine unclassified tailings [J]. Journal of Guangxi University: Nat Sci Ed, 2013, 38(2): 451-455(in Chinese)

[5] RuanZ-e, LiC-p, ShiCong. Numerical simulation of flocculation and settling behavior of whole-tailings particles in deep-cone thickener [J]. Journal of Central South University, 2016, 23(3): 740-749

[6] BanisiS, YahyaeiM. Feed dilution-based design of a thickener for refuse slurry of a coal preparation plant [J]. International Journal of Coal Preparation & Utilization, 2008, 28(4): 201-223

[7] UsherS P, SpeharR, ScalesP J. Theoretical analysis of aggregate densification: Impact on thickener performance [J]. Chemical Engineering Journal, 2009, 151(1): 202-208

[8] WuA-x, ZhouJ, YinS-h, WangL-ming. Influence factors on flocculation sedimentation of unclassified tailings [J]. The Chinese Journal of Nonferrous Metals, 2016, 26(2): 439-446(in Chinese)

[9] JiaoH-z, WuA-x, WangH-j, LiuX-h, YangS-k, XiaoY-tian. Experiment study on the flocculation settlement characteristic of unclassified tailings [J]. Journal of University of Science & Technology Beijing, 2011, 33(12): 1437-1441(in Chinese)

[10] YangC, GuoL-j, XuW-y, LiX, XueS-shan. Experimental study on the rule of flocculation sedimentation of filling tailings [J]. Gold, 2014, 35(6): 39-42(in Chinese)

[11] CiftciH, IsikS. Settling characteristics of coal preparation plant fine tailings using anionic polymers [J]. Korean Journal of Chemical Engineering, 201717

[12] OwenA T, NguyenT V, FawellP D. The effect of flocculant solution transport and addition conditions on feedwell performance in gravity thickeners [J]. International Journal of Mineral Processing, 2009, 93(2): 115-127

[13] NguyenT V, FarrowJ B, SmithJ, FawellP D. Design and development of a novel thickener feedwell using computational fluid dynamics [J]. Journal-South African Institute of Mining and Metallurgy, 2012, 112(112): 939-948

[14] TaoD, ParekhB K, ZhaoY-m, ZhangP. Pilot-scale demonstration of deep Cone™ paste thickening process for phosphatic Clay/Sand disposal [J]. Separation Science & Technology, 2010, 45(10): 1418-1425

[15] GheshlaghiM E, GoharriziA S, ShahrivarA A. Simulation of a semi-industrial pilot plant thickener using CFD approach [J]. International Journal of Mining Science and Technology, 2013, 23(1): 63-68

[16] GheshlaghiM E, GoharriziA S, ShahrivarA A, AbdollahiH. Modeling industrial thickener using computational fluid dynamics (CFD), a case study: Tailing thickener in the Sarcheshmeh copper mine [J]. International Journal of Mining Science and Technology, 2013, 23(6): 885-892

[17] ZhouT, LiM, LiQ-l, LeiB, ZhouQ, ZhouJ-ming. Numerical simulation of flow regions in red mud separation thickener’s feedwell by analysis of residence-time distribution [J]. Transactions of Nonferrous Metals Society of China, 2014, 24(4): 1117-1124

[18] RahimiM, AbdollahzadehA A, RezaiB. Dynamic simulation of tailing thickener at the Tabas coal washing plant using the phenomenological model [J]. International Journal of Mineral Processing, 2016, 154: 35-40

[19] HuangG, LiuJ-t, WangL-j, SongZ-hao. Flow field simulation of agitating tank and fine coal conditioning [J]. International Journal of Mineral Processing, 2016, 148: 116-123

[20] ŠutaloI D, PatersonD A, RudmanM. Flow visualisation and computational prediction in thickener rake models [J]. Minerals Engineering, 2003, 16(2): 93-102

[21] KahaneR B, NguyenT, SchwarzM P. CFD modelling of thickeners at Worsley Alumina Pty Ltd [J]. Applied Mathematical Modelling, 2002, 26(2): 281-296

[22] LiH, WangH-j, WuA-x, JiaoH-z, LiuX-hui. Pressure rake analysis of deep cone thickeners based on tailings’ settlement and rheological characteristics [J]. Journal of University of Science & Technology Beijing, 2013, 35(12): 1553-1558(in Chinese)

[23] RudmanM, SimicK, PatersonD A, StrodeP, BrentA, ŠutaloI D. Raking in gravity thickeners [J]. International Journal of Mineral Processing, 2008, 86(1): 114-130

[24] RudmanM, PatersonD A, SimicK. Efficiency of raking in gravity thickeners [J]. International Journal of Mineral Processing, 2010, 95(1): 30-39

[25] DuJ-h, PushkarovaR A, SmartR S C. A cryo-SEM study of aggregate and floc structure changes during clay settling and raking processes [J]. International Journal of Mineral Processing, 2009, 93(1): 66-72

[26] WuA-x, WangY, WangH-jiang. Effect of rake rod number and arrangement on tailings thickening performance [J]. Journal of Central South University, 2014, 45(1): 244-248(in Chinese)

[27] WuA-x, JiaoH-z, WangH-j, YangS-k, YaoG-h, LiuX-hui. Mechanical model of scraper rake torque in deep-cone thickener [J]. Journal of Central South University, 2012, 43(4): 1469-1474(in Chinese)

[28] WeiL-b, SunM-yang. Numerical studies of the influence of particles’ size distribution characteristics on the gravity separation performance of liquid-solid fluidized bed separator [J]. International Journal of Mineral Processing, 2016, 157: 111-119

[29] AjamuS O, IgeJ A. Influence of coarse aggregate type and mixing method on properties of concrete made from natural aggregates in Ogbomoso Oyo state Nigeria [J]. International Journal of Engineering and Technology, 2015, 5(7): 426-433

[30] WuA-x, RuanZ-e, WangY-m, YinS-h, WangS-y, WangY, WangJ-dong. CFD simulation of long-distance pipeline transportation properties of whole-tailings paste with high sliming [J]. Journal of Central South University, 2018, 25(1): 141-150

[31] RandolphA D, LarsonM ATheory of particulate processes (2nd ed) [M], 1988, San Diego, CA, Academic Press: 4163

[32] RamkrishnaDPopulation balance: Theory and application to particulate systems in engineering [M], 2000, New York, Academic Press: 745

[33] YuanC, LaurentF, FoxR O. An extended quadrature method of moments for population balance equations [J]. Journal of Aerosol Science, 2012, 51(51): 1-23

[34] McGrawR. Description of aerosol dynamics by the quadrature method of moments [J]. Aerosol Science & Technology, 1997, 27(2): 255-265

[35] LuoH, SvendsenH F. Theoretical model for drop and bubble breakup in turbulent dispersions [J]. Aiche Journal, 1996, 42(5): 766-776

[36] GhadiriM, ZhangZ. Impact attrition of particulate solids. Part 1: A theoretical model of chipping [J]. Chemical Engineering Science, 2002, 57(17): 3659-3669

[37] Moreno-atanasioR, GhadiriM. Mechanistic analysis and computer simulation of impact breakage of agglomerates: Effect of surface energy [J]. Chemical Engineering Science, 2006, 61(8): 2476-2481

[38] VigilR D, ZiffR M. On the stability of coagulation-fragmentation population balances [J]. Journal of Colloid & Interface Science, 1989, 133(1): 257-264