Effect of wire mesh interlayer in explosive cladding of dissimilar grade aluminum plates

Abstract

Explosive cladding of Al 5052-Al 1100 plate, interfaced with a stainless steel wire mesh interlayer, is attempted. Loading ratio and standoff distance were varied. An increase in loading ratio (R) and standoff distance (S) enhances the plate velocity (V_p), dynamic bend angle (β) and pressure developed (P). The interface morphology of the explosive clads confirms strong metallurgical bond between the wire mesh and aluminum plates. Further, a smooth transition from straight to undulating interlayered topography is witnessed. The introduction of a wire mesh, as interlayer, leads to an improvement in mechanical strength with a slender reduction in overall corrosion resistance of the “explosive clads”.

Keywords

explosive cladding / aluminum / wire mesh / microstructure / strength

References

[1] JiH, WangJ, LiM. Evolution of the bulk microstructure in 1100 aluminum builds fabricated by ultrasonic metal welding [J]. Journal of Materials Processing Technology, 2014, 214(2): 175-182

[2] MandalN RAluminum welding [M], 2002, Cambridge, Wood Head Publishing

[3] BhallaA K, WilliamsJ D. Production of stainless steel wire-reinforced aluminium composite sheet by explosive compaction [J]. Journal of Materials Science, 1977, 12(3): 522-530

[4] SaravananS, RaghukandanK. Diffusion kinetics in explosive cladding of dissimilar alloys as described through the Miedema model [J]. Archives of Metallurgy and Materials, 2014, 59(4): 1615-1618

[5] AcarerM. Electrical, corrosion and mechanical properties of aluminium-copper joints produced by explosive welding [J]. Journal of Materials Engineering and Performance, 2012, 21(11): 2375-2379

[6] AcarerM, DemirB. An investigation of mechanical and metallurgical properties of explosive welded aluminum-dual phase steel [J]. Materials Letters, 2008, 62(25): 4158-4160

[7] ZhangN, WangW, CaoX, WuJ. The effect of annealing on the interface microstructure and mechanical characteristics of AZ31B/AA6061 composite plates fabricated by explosive welding [J]. Materials and Design, 2015, 65: 1100-1109

[8] GrignonF, BensonD, VecchioK S, MayersM A. Explosive welding of aluminum to aluminum: Analysis, computations and experiments [J]. International Journal of Impact Engineering, 2004, 30(10): 1333-1351

[9] HanJ H, AhnJ P, ShinM C. Effect of interlayer thickness on shear deformation behavior of AA5083 aluminum alloy/SS41 steel plates manufactured by explosive welding [J]. Journal of Materials Science, 2003, 38(1): 13-18

[10] SaravananS, RaghukandanK, HokamotoK. Improved microstructure and mechanical properties of dissimilar explosive cladding by means of interlayer technique [J]. Archives of Civil and Mechanical Engineering, 2016, 16(4): 563-568

[11] GulencB, KayaY, DurgutluA, GulencI T, YildirimM S, KahramanN. Production of wire reinforced composite materials through explosive welding [J]. Archives of Civil and Mechanical Engineering, 2016, 16(1): 1-8

[12] ManikandanP, HokamotoK, FujitaM, RaghukandanK, TomashigeR. Control of energetic conditions by employing interlayer of different thickness for explosive welding of titanium/ 304 stainless steel [J]. Journal of Materials Processing Technology, 2008, 195(1–3): 232-240

[13] SatyanarayaN, TanakaS, MoriA, HokamotoK. Welding of Sn and Cu plates using controlled underwater shock wave [J]. Journal of Materials Processing Technology, 2017, 245: 300-308

[14] WangB, XieF, LuoX, ZhouJ. Experimental and physical model of the melting zone in the interface of the explosive cladding bar [J]. Journal of Materials Research and Technology, 2016, 5(4): 333-338

[15] KahramanN, GulencB, FindikF. Corrosion and mechanical-microstructural aspects of dissimilar joints of Ti-6Al-4V and Al plates [J]. International Journal of Impact Engineering, 2007, 34(8): 1423-1432

[16] TamilchelvanP, RaghukandanK, SaravananS. Kinetic energy dissipation in Ti-SS explosive cladding with multi loading ratios [J]. Iranian Journal of Science and Technology, Transactions of Mechanical Engineering, 2014, 38(M1): 91-96

[17] AsemabadiM, SedighiM, HonarpishehM. Investigation of cold rolling influence on the mechanical properties of explosive-welded Al/Cu bimetal [J]. Materials Science and Engineering A, 2012, 558: 144-149

[18] SaravananS, RaghukandanK, HokamotoK. Effect of process parameters on microstructural and mechanical properties of Ti-SS 304L explosive cladding [J]. Journal of Central South University, 2017, 24(6): 1245-1251

[19] PrazmowskiM, PaulH. The effect of stand-off distance on the structure and properties of zirconium — carbon steel bimetal produced by explosion welding [J]. Archives of Metallurgy and Materials, 2012, 57(4): 1201-1210

[20] SaravananS, RaghukandanK. Influence of interlayer in explosive cladding of dissimilar metals [J]. Materials and Manufacturing Processes, 2013, 28(5): 589-594

[21] NingJ, ZhangL J, XieM X, YangH X, YinX Q, ZhangJ X. Microstructure and property inhomogeneity investigations of bonded Zr/Ti/steel trimetallic sheet fabricated by explosive welding [J]. Journal of Alloys and Compounds, 2017, 698: 835-851