A global-local finite element analysis of hybrid composite-to-metal bolted connections used in aerospace engineering

Abstract

Efficient bolted joint design is an essential part of designing the minimum weight aerospace structures, since structural failures usually occur at connections and interface. A comprehensive numerical study of three-dimensional (3D) stress variations is prohibitively expensive for a large-scale structure where hundreds of bolts can be present. In this work, the hybrid composite-to-metal bolted connections used in the upper stage of European Ariane 5ME rocket are analyzed using the global-local finite element (FE) approach which involves an approximate analysis of the whole structure followed by a detailed analysis of a significantly smaller region of interest. We calculate the Tsai-Wu failure index and the margin of safety using the stresses obtained from ABAQUS. We find that the composite part of a hybrid bolted connection is prone to failure compared to the metal part. We determine the bolt preload based on the clamp-up load calculated using a maximum preload to make the composite part safe. We conclude that the unsuitable bolt preload may cause the failure of the composite part due to the high stress concentration in the vicinity of the bolt. The global-local analysis provides an efficient computational tool for enhancing 3D stress analysis in the highly loaded region.

Keywords

bolted connection / global-local finite element approach / failure / bolt preload

References

[1] LuY-y, HuL, LiS, WangK-hao. Experimental study and analysis on fatigue stiffness of RC beams strengthened with CFRP and steel plate [J]. Journal of Central South University, 2016, 23(3): 701-707

[2] GrahamD P, RezaiA, BakerD, SmithP A, WattsJ F. A hybrid joining scheme for high strength multi-material joints [C]//. Proceedings of 18th International Conference on Composite Materials, 201116

[3] UcsnikS, ScheererM, ZarembaS, PahrD H. Experimental investigation of a novel hybrid metal-composite joining technology [J]. Composites Part A: Applied Science and Manufacturing, 2010, 41(3): 369-374

[4] ParkesP N, ButlerR, AlmondD P. Growth of damage in additively manufactured metal-composite joints [C]//. Proceedings of 15th European Conference on Composite Materials, 20122129

[5] ParkesP N, ButlerR, AlmondD P. Fatigue of metalcomposite joints with penetrative reinforcement [C]//. Proceedings of 54th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, 201319

[6] SunH T, ChangF K, QingX L. The response of composite joints with bolt-clamping loads, part II: Model verification [J]. Journal of Composite Materials, 2002, 36(1): 47-67

[7] CacceseV, BerubeK A, FernandezM, MeloJ D, KabcheJ P. Influence of stress relaxation on clamp-up force in hybrid composite-to-metal bolted joints [J]. Composite Structures, 2009, 89(2): 285-293

[8] CacceseV, MewerR, VelS S. Detection of bolt load loss in hybrid composite/metal bolted connections [J]. Engineering Structures, 2004, 26(7): 895-906

[9] ParkesP N, ButlerR, MeyerJ, OliveirA D. Static strength of metal-composite joints with penetrative reinforcement [J]. Composite Structures, 2014, 118(1): 250-256

[10] StarikovR, SchonJ. Experimental study on fatigue resistance of composite joints with protruding-head bolts [J]. Composite Structures, 2002, 55(1): 1-11

[11] KellyG. Quasi-static strength and fatigue life of hybrid (bonded/bolted) composite single-lap joints [J]. Composite Structures, 2006, 72(1): 119-129

[12] QinX-peng. Modelling and simulation of contact force in cold rotary forging [J]. Journal of Central South University, 2014, 21(1): 35-42

[13] CaoQ, HuaL, QianD-sheng. Finite element analysis of deformation characteristics in cold helical rolling of bearing steel-balls [J]. Journal of Central South University, 2015, 22(4): 1175-1183

[14] CartieD D R, CoxB N, FleckN A. Mechanisms of crack bridging by composite and metallic rods [J]. Composites Part A: Applied Science and Manufacturing, 2004, 35(11): 1325-1336

[15] NogueiraA C, DrechslerK. Analysis of the static and fatigue strength of a damage tolerant 3D reinforced joining technology on composite single lap joints [C]//. Proceedings of 53rd AIAA/ASME/ ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, 201216

[16] IremanT. Three-dimensional stress analysis of bolted single-lap composite joints [J]. Composite Structures, 1998, 43(3): 195-216

[17] TserpesK I, LabeasG, PapanikosP, KermanidisT. Strength prediction of bolted joints in graphite/epoxy composite laminates [J]. Composites Part B: Engineering, 2002, 33(7): 521-529

[18] HuhneC, ZerbstA K, KuhlmannG, SteenbockC, RolfesR. Progressive damage analysis of composite bolted joints with liquid shim layers using constant and continuous degradation models [J]. Composite Structures, 2010, 92(2): 189-200

[19] KapaniaR K, HaryadiS G, HaftkaR T. Global/local analysis of composite plates with cutouts [J]. Computational Mechanics, 1997, 19(5): 386-396

[20] ReinosoJ, BlazquezA, EstefaniA, ParisF, CanasJ. A composite runout specimen subjected to tension–compression loading conditions: Experimental and global–local finite element analysis [J]. Composite Structures, 2013, 101(15): 274-289

[21] ReinosoJ, BlazquezA, EstefaniA, ParisF, CanasJ, ArvaloE, CruzF. Experimental and three-dimensional global/local finite element analysis of a composite component including degradation process at the interfaces [J]. Composites Part B: Engineering, 2012, 43(4): 1929-1942

[22] JradM, SunnyM R, KapaniaR K. Global–local analysis of composite plate with thin notch [J]. Journal of Aircraft, 2014, 51(3): 967-974

[23] BogdanovichA E, KizhakketharaI. Three-dimensional finite element analysis of adhesively bonded plates [C]//. Proceedings of 38th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, 199719841992

[24] BogdanovichA E, KizhakketharaI. Three-dimensional finite element analysis of double-lap adhesive bonded joints using submodeling approach [J]. Composites Part B: Engineering, 1999, 30(6): 537-551

[25] LiuY-j, SunQ, FanX-ling. A non-intrusive global/local algorithm with non-matching interface: Derivation and numerical validation [J]. Computer Methods in Applied Mechanics and Engineering, 2014, 277(2): 81-103

[26] Metallic materialselements for aerospace vehicle structures [M].Department of Defense, 1994, 2: 103-106

[27] BakkerMStress fields around bolts in bolted joints and trends for failure predictions [D], 2012, Delft, Delft University of Technology