Multi-mode process monitoring based on a novel weighted local standardization strategy and support vector data description

Abstract

There are multiple operating modes in the real industrial process, and the collected data follow the complex multimodal distribution, so most traditional process monitoring methods are no longer applicable because their presumptions are that sampled-data should obey the single Gaussian distribution or non-Gaussian distribution. In order to solve these problems, a novel weighted local standardization (WLS) strategy is proposed to standardize the multimodal data, which can eliminate the multi-mode characteristics of the collected data, and normalize them into unimodal data distribution. After detailed analysis of the raised data preprocessing strategy, a new algorithm using WLS strategy with support vector data description (SVDD) is put forward to apply for multi-mode monitoring process. Unlike the strategy of building multiple local models, the developed method only contains a model without the prior knowledge of multi-mode process. To demonstrate the proposed method’s validity, it is applied to a numerical example and a Tennessee Eastman (TE) process. Finally, the simulation results show that the WLS strategy is very effective to standardize multimodal data, and the WLS-SVDD monitoring method has great advantages over the traditional SVDD and PCA combined with a local standardization strategy (LNS-PCA) in multi-mode process monitoring.

Keywords

multiple operating modes / weighted local standardization / support vector data description / multi-mode monitoring

References

[1] GeZ-q, SongZ-huan. Multimode process monitoring based on Bayesian method [J]. Journal of Chemometrics, 2009, 23(12): 636-650

[2] ZhaoS-j, ZhangJ, XuY-mao. Monitoring of processes with multiple operation modes through multiple principle component analysis models [J]. Industrial & Engineering Chemistry Research, 2004, 43(22): 7025-7035

[3] QinS J. Statistical process monitoring: Basics and beyond [J]. Journal of Chemometrics, 2003, 17(8): 480-502

[4] GeZ-q, SongZ-h, GaoF-rong. Review of recent research on data-based process monitoring [J]. Industrial & Engineering Chemistry Research, 2013, 52(10): 3543-3562

[5] KrugerUAdvances in statistical monitoring of complex multivariate processes: With applications in industrial process control [M], 2012ChichesterWiley

[6] ZhaoC-h, GaoF-rong. Fault-relevant principal component analysis (FPCA) method for multivariate statistical modeling and process monitoring [J]. Chemometrics & Intelligent Laboratory Systems, 2014, 133(6): 1-16

[7] TanS, WangF-l, PengJ, ChangY-q, WangShu. Multimode process monitoring based on mode identification [J]. Industrial & Engineering Chemistry Research, 2012, 51(1): 374-388

[8] LiuJ-l, ChenD-sou. Fault detection and identification using modified Bayesian classification on PCA subspace [J]. Industrial & Engineering Chemistry Research, 2009, 48(6): 3059-3077

[9] XieX, ShiH-bo. Multimode process monitoring based on fuzzy C-means in locality preserving projection subspace [J]. Chinese Journal of Chemical Engineering, 2012, 20(6): 1174-1179

[10] WangF-l, TanS, PengJ, ChangY-qing. Process monitoring based on mode identification for multi-mode process with transitions [J]. Chemometrics & Intelligent Laboratory Systems, 2012, 110(1): 144-155

[11] SongB, ShiH-b, MaY-xin. Multi-subspace principal component analysis with local outlier factor for multimode process monitoring [J]. Industrial & Engineering Chemistry Research, 2014, 53(42): 16453-16464

[12] ZhaoS-j, ZhangJ, XuY-mao. Performance monitoring of processes with multiple operating modes through multiple PLS models [J]. Journal of Process Control, 2006, 16(7): 763-772

[13] NatarajanS, SrinivasanR. Multi-model based process condition monitoring of offshore oil and gas production process [J]. Chemical Engineering Research and Design, 2010, 88(5/6): 572-591

[14] MaH-h, HuY, ShiH-bo. Fault detection and identification based on the neighborhood standardized local outlier factor method [J]. Industrial & Engineering Chemistry Research, 2013, 52(6): 2389-2402

[15] YuJ, QinS J. Multimode process monitoring with Bayesian inference-based finite Gaussian mixture models [J]. AIChE Journal, 2008, 54(7): 1811-1829

[16] HwangD H, HanC H. Real-time monitoring for a process with multiple operating modes [J]. Control Engineering Practice, 1999, 7: 891-902

[17] MaH-h, HuY, ShiH-bo. A novel local neighborhood standardization strategy and its application in fault detection of multimode processes [J]. Chemometrics & Intelligent Laboratory Systems, 2012, 118(7): 287-300

[18] TeppolaP, MujunenS P, MinkkinenP. Adaptive fuzzy C-means clustering in process monitoring [J]. Chemometrics and Intelligent Laboratory Systems, 1999, 45(1/2): 23-38

[19] ChoiS W, MartinE B, MorrisA J, LeeI B. Adaptive multivariate statistical process control for monitoring time-varying processes [J]. Industrial & Engineering Chemistry Research, 2006, 45(9): 3108-3118

[20] GeZ-q, SongZ-huan. Online monitoring of nonlinear multiple mode processes based on adaptive local model approach [J]. Control Engineering Practice, 2008, 16(12): 1427-1437

[21] SongB, MaY-x, ShiH-bo. Multimode process monitoring using improved dynamic neighborhood preserving embedding [J]. Chemometrics & Intelligent Laboratory Systems, 2014, 135(14): 17-30

[22] XieX, ShiH-bo. Dynamic multimode process modeling and monitoring using adaptive Gaussian mixture models [J]. Industrial & Engineering Chemistry Research, 2012, 51(15): 5497-5505

[23] MaY-x, ShiH-b, WangM-ling. Adaptive local outlier probability for dynamic process monitoring [J]. Chinese Journal of Chemical Engineering, 2014, 22(7): 820-827

[24] LeeY H, JinH D, HanC H. On-line process state classification for adaptive monitoring [J]. Industrial & Engineering Chemistry Research, 2006, 45(9): 3095-3107

[25] JinH D, LeeY H, LeeG, HanC H. Robust recursive principal component analysis modeling for adaptive monitoring [J]. Industrial and Engineering Chemistry Research, 2006, 45(2): 696-703

[26] KanoM, HasebeS, HashimotoI, et al.. Evolution of multivariate statistical process control: Application of independent component analysis and external analysis [J]. Computers and Chemical Engineering, 2004, 28(6/7): 1157-1166

[27] TaxD M J, DuinR P W. Support vector domain description [J]. Pattern Recognition Letters, 1999, 20: 1191-1199

[28] TaxD M J, DuinR P W. Support vector data description [J]. Machine Learning, 2004, 54: 45-66

[29] DownsJ J, VogelE F. A plant-wide industrial process control problem [J]. Computers and Chemical Engineering, 1993, 17(3): 245-255

[30] RickerN L. Optimal steady-state operation of the Tennessee Eastman challenge process [J]. Computers & Chemical Engineering, 1995, 19(9): 949-959

[31] WangL, ShiH-bo. Multivariate statistical process monitoring using an improved independent component analysis [J]. Chemical Engineering Research & Design, 2010, 88(4): 403-414