Effect of a novel three-step aging on strength, stress corrosion cracking and microstructure of AA7085

Abstract

The influence of a novel three-step aging on strength, stress corrosion cracking (SCC) and microstructure of AA7085 was investigated by tensile testing and slow strain rate testing combined with transmission electron microscopy (TEM). The results indicate that with the increase of second-step aging time of two-step aging, the mechanical properties increase first and then decrease, while the SCC resistance increases. Compared with two-step aging, three-step aging treatment improves SCC resistance and the strength increases by about 5%. The effects of novel three-step aging on strength and SCC resistance are explained by the role of matrix precipitates and grain boundary precipitates, respectively.

Keywords

7085 aluminum alloy / three-step aging / strength / stress corrosion cracking / microstructure

References

[1] ChakrabartiD, LiuJ, SawtellR, VenemaG. New generation high strength high damage tolerance 7085 thick alloy product with low quench sensitivity [J].. Mater Forum, 2004, 28(1): 969-974

[2] ShueyR, BarlatF, KarabinM, ChakrabartiD. Experimental and analytical investigations on plane strain toughness for 7085 aluminum alloy [J].. Metall Trans A, 2009, 40(1): 365-976

[3] MenzemerC, LamD, SrivatsanT. An Investigation of strain concentration in high-strength Al-Zn-Mg-Cu Alloy 7085 subjected to tensiles deformation [J].. J Mater Eng Perform, 2010, 19(1): 705-713

[4] KarabinM E, BarlatF, SchultzR W. Numerical and experimental study of the cold expansion process in 7085 plate using a modified split sleeve [J].. J Mater Process Technol, 2007, 189(1): 45-57

[5] SarkarB, MarekM, StarkeE. The effect of copper content and heat treatment on the stress corrosion characteristics of Al-6Zn-2Mg-XCu alloys [J].. Metall Trans A, 1981, 12(11): 1939-1943

[6] WlokaJ, HackT, VirtanenS. Influence of temper and surface condition on the exfoliation behaviour of high strength Al-Zn-Mg-Cu alloys [J].. Corros Sci, 2007, 49(3): 1437-1449

[7] XuD, BirbilisN, RometschP. The effect of pre-ageing temperature and retrogression heating rate on the strength and corrosion behaviour of AA7150 [J].. Corros Sci, 2012, 54(1): 17-25

[8] LiaoH L, LinJ C, LeeS L. Effect of pre-immersion on the SCC of heat-treated AA7050 in an alkaline 3.5%NaCl [J].. Corros Sci, 2009, 51(1): 209-216

[9] LinJ C, LiaoH L, JehngW D, ChangC H, LeeS L. Effect of heat treatments on the tensile strength and SCC-resistance of AA7050 in an alkaline saline solution [J].. Corros Sci, 2006, 48(10): 3139-3156

[10] LiZ, XiongB, ZhangY, ZhuB, WangF, LiuH. Investigation on strength, toughness and microstructure of an Al–Zn–Mg–Cu alloy pre-stretched thick plates in various ageing tempers [J].. J Mater Process Technol, 2009, 209(4): 2021-2027

[11] XiaoY P, PanQ L, LiW B, LiuX Y, HeY B. Influence of retrogression and re-aging treatment on corrosion behaviour of an Al-Zn-Mg-Cu alloy [J].. Mater Design, 2011, 32(4): 2149-2156

[12] ChenS, ChenK, PengG, JiaL, DongP. Effect of heat treatment on strength, exfoliation corrosion and electrochemical behavior of 7085 aluminum alloy [J].. Mater Design, 2012, 35(1): 93-98

[13] CinaB MReducing the suscepfibility of alloys particularly aluminium alloys to stress corrosion cracking: US 3856584 [P], 1974

[14] PengG, ChenK, ChenS, FangH. Influence of repetitious-RRA treatment on the strength and SCC resistance of Al-Zn-Mg-Cu alloy [J].. Mater Sci Eng A, 2011, 528(12): 4014-4018

[15] PengG S, ChenK H, ChenS Y, FangH C. Influence of dual retrogression and re-aging temper on microstructure, strength and exfoliation corrosion behavior of Al–Zn–Mg–Cu alloy [J].. Transactions of Nonferrous Metals Society of China, 2012, 22(4): 803-809

[16] VianaF, PintoA, SantosH, LopesA. Retrogression and re-ageing of 7075 aluminium alloy: Microstructural characterization [J].. J Mater Process Technol, 1999, 92(1): 54-59

[17] MarlaudT, DeschampsA, BleyF, LefebvreW, BarouxB. Evolution of precipitate microstructures during the retrogression and re-ageing heat treatment of an Al-Zn-Mg-Cu alloy [J].. Acta Mater, 2010, 58(14): 4814-4826

[18] ChakrabartiD J, LiuJ, GoodmanJ HAlumiunm alloy products having improved property combinations and method for artificially aging same: US Patents 8083870 [P], 2011

[19] HatchJ E. Aluminum: properties and physical metallurgy [M]. Ohio, USA: ASM International, 198425-70

[20] MarlaudT, DeschampsA, BleyF, LefebvreW, BarouxB. Influence of alloy composition and heat treatment on precipitate composition in Al-Zn-Mg-Cu alloys [J].. Acta Mater, 2010, 58(1): 248-260

[21] DeschampsA, BrechetY, LivetF. Influence of copper addition on precipitation kinetics and hardening in Al-Zn-Mg alloy [J].. Mater Sci Technol, 1999, 15(9): 993-1000

[22] StillerK, WarrenP, HansenV, AngeneteJ, GjnnesJ. Investigation of precipitation in an Al-Zn-Mg alloy after two-step ageing treatment at 100 °C and 150 °C [J].. Mater Sci Eng A, 1999, 270(1): 55-63

[23] WangD, MaZ Y. Effect of pre-strain on microstructure and stress corrosion cracking of over-aged 7050 aluminum alloy [J].. J Alloys Compd, 2009, 469(1): 445-450

[24] ParkJ, ArdellA. Effect of retrogression and reaging treatments on the microstructure of Al7075-T651 [J].. Metall Trans A, 1984, 15(11): 1531-1543