Torsional vibration active control of hybrid construction machinery complex shafting

Abstract

Due to the coaxial connection of engine, motor and pump, the dynamic characteristics of hybrid construction machinery are changed, which generates a new torsional vibration problem of multi-power sources. To reduce the torsional vibration of the hybrid construction machinery complex shafting, torsional vibration active control was proposed. The three-mass model of coaxial shafting of hybrid construction machinery was established. The PID control and the fuzzy sliding mode control were chosen to weaken torsional vibration by controlling the motor speed and torque. The simulation results show that the fuzzy sliding mode control has 12% overshoot of the PID control when the engine torque changes. The active control is effective and can realize smooth power switch.

Keywords

torsional vibration active control / hybrid construction machinery / electro-mechanical coupling / fuzzy sliding mode control

References

[1] LinT-l, WangQ-f, HuB-z, GongWen. Development of hybrid powered hydraulic construction machinery [J]. Automation in Construction, 2010, 19: 11-19

[2] LiuL-chen. The development state and expectation of hybrid power construction machinery [J]. Construction Machinery and Maintenance, 201042-44

[3] KatrasnikT, TrencF, MedicaV. An analysis of turbocharged diesel engine dynamic response improvement by electric assisting systems [J]. Journal of Engineering for Gas Turbines and Power, 2005, 127(4): 918-926

[4] ZeraouliaM, BenbouzidM E H, DialloD. Electric motor drive selection issues for HEV propulsion systems: A comparative study [J]. IEEE Transactions on Vehicular Technology, 2006, 55(6): 1756-1764

[5] MorenoJ, OrtuzarM E, DixonJ W. Energy-management system for a hybrid electric vehicle, using ultracapacitors and neural networks [J]. IEEE Transactions on Industrial Electronics, 2006, 53(2): 614-623

[6] XiaoQ, WangQ-f, ZhangY-ting. Control strategies of power system in hybrid hydraulic excavator [J]. Automation in Construction, 2008, 17(4): 361-367

[7] LinX, PanS-x, WangD-yun. Dynamic simulation and optimal control strategy for a parallel hybrid hydraulic excavator [J]. Journal of Zhejiang University Science A, 2008, 9(5): 624-632

[8] WangD-y, LinX, ZhangYu. Fuzzy logic control for parallel hybrid hydraulic excavator using genetic algorithm [J]. Automation in Construction, 2011, 20: 581-587

[9] LinT-l, WangQ-feng. Hydraulic accumulator-motor-generator energy regeneration system for a hybrid hydraulic excavator [J]. Chinese Journal of Mechanical Engineering, 2012, 25(6): 1121-1129

[10] YueD-p, WuY, WangTao. The influence of electromagnetism on vibration and noise for mild hybrid system [J]. Vehicle Engine, 2010, 5: 69-72

[11] YueD-p, MiaoD-h, ZhangJ-xia. Dynamics analysis on shafts in hybrid system with electro-mechanical coupling [J]. Automotive Engineering, 2008, 30(3): 211-214

[12] KozarekarS S, SupinaJHybrid automotive powertrain with torsional vibration damper: US Patent 7175555 [P], 2007

[13] KrotP V. Transient torsional vibrations control in the geared drive trains of the hot rolling mills [C]. IEEE International Conference on Control Applications. St. Petersburg: ISIC, 20091368-1373

[14] ZhaoW, HuangDan. Dynamic disturbance simulation of modal control and control model of torsional vibration of the rolling mill [J]. Key Engineering Materials, 2011, 467/468/469: 509-514

[15] YangX, TongC-nan. Nonlinear modeling and global sliding mode control of main drive system torsional vibration in cold rolling mill [C]. Proceedings of 5th International Conference on Intelligent Computation Technology and Automation, 2012, Zhangjiajie, ICICTA: 233-236

[16] XiaoQ, WangQ-f, ZhangY-ting. Study on modeling and control Strategies of hybrid system in hybrid hydraulic excavator [J]. Journal of Zhejiang University, 2007, 41(3): 480-484