Microstructure and mechanical properties of as-cast Mg-8Sn-1Al-1Zn-xNi alloys

Abstract

Mg-8Sn-1Al-1Zn-xNi (x=0.5%, 1.0%, 1.5%, 2.0%, mass fraction) alloys were designed and prepared. The microstructures and the mechanical properties were studied by using optical microscope, scanning electronic microscope, energy dispersive X-ray spectroscope, X-ray diffraction and a standard universal testing machine. The results show that the microstructure of Ni-containing alloys consist of α-Mg, Mg₂Sn, β-Mg-Ni-Al and γ-AlNi phases. No β-Mg-Ni-Al phase was observed in TAZ811-2.0Ni alloy due to its 1:1 atomic ratio of Ni/Al. The addition of Ni refines the α-Mg dendrites and suppresses the formation of coarse Mg₂Sn phase. The tensile properties results show that the TAZ811-0.5Ni alloy presented the best mechanical properties, which is due to the rod-like β-Mg-Ni-Al phase, refined α-Mg dendrites and Mg₂Sn phase, as well as γ-AlNi phase. The tensile fracture mechanism transits from cleavage to quasi-cleavage fracture with the increasing Ni addition.

Keywords

Mg-Sn-Al-Zn alloy / Ni / microstructure / mechanical properties

References

[1] ChengW L, ParkS S, YouB S, KooB H. Microstructure and mechanical properties of binary Mg-Sn alloys subjected to indirect extrusion [J]. Materials Science and Engineering: A, 2010, 527(18/19): 4650-4653

[2] KozlovA, OhnoM, ArroyaveR, LiuZ K. SCHMID-FETZER R, Phase equilibria, thermodynamics and solidification microstructures of Mg-Sn-Ca alloys, Part 1: Experimental investigation and thermodynamic modeling of the ternary Mg-Sn-Ca system [J]. Intermetallics, 2008, 16: 299-315

[3] SonH T, LeeJ B, JeongH G, KonnoT J. Effects of Al and Zn additions on mechanical properties and precipitation behaviors of Mg-Sn alloy system [J]. Materials Letters, 2011, 65: 1966-1969

[4] LiuH, ChenY, TangY, HuangD, NiuG. The microstructure and mechanical properties of permanent-mould cast Mg-5 wt.% Sn-(0-2.6) wt.% Di alloys [J]. Materials Science and Engineering: A, 2006, 437: 348-55

[5] NayyeriG, MahmudiR. The microstructure and impression creep behavior of cast, Mg-5Sn-xCa alloys [J]. Materials Science and Engineering: A, 2010, 527: 2087-2098

[6] HortN, HuangY, LeilT A, MaierP, KainerK U. Microstructural investigations of the Mg-Sn-xCa system [J]. Adv Eng Mater, 2006, 8: 359-364

[7] KimD H, LeeJ Y, LimH K, KyeongJ S, KimW T, KimD H. The effect of microstructure evolution on the elevated temperature mechanical properties in Mg-Sn-Ca system [J]. Mater Trans, 2008, 49: 2405-24013

[8] LeilT A, HuangY, DieringH, HortN, KainerK U, BursikJ. Effect of heat treatment on the microstructure and creep behavior of Mg-Sn-Ca alloys [J]. Material Science Forum, 2007, 546-549: 69-72

[9] HuangX F, ZhangW Z. Microstructure and mechanical properties of conventional cast and rheocast Mg-Sn based alloys [J]. Materials Science and Engineering: A, 2012, 552: 211-221

[10] PoddarP, SahooK L. Effects of cooling rate and pressure on microstructure and mechanical properties of sub-rapidly solidified Mg-Zn-Sn-Al-Ca alloy [J]. Materials and Design, 2012, 545: 103-110

[11] ChenJ H, WeiJ Y, YanH G, SuB, PanX Q. Creep behaviour of Mg-8% Sn and Mg-8% Sn-3% Al-1% Si alloys [J]. Materials Science and Engineering: A, 2012, 545: 103-110

[12] PoddarP, SahooK L, MukherjeeS, RayA K. Microstructure evolution and properties of Mg-3Sn-1Mn (wt%) alloy strip processed by semisolid rheo-rolling [J]. Journal of Materials Processing Technology, 2012, 212: 1430-1436

[13] NayyeriG, MahmudiR. The microstructure and impression creep behavior of cast, Mg-5Sn-xCa alloys [J]. Materials Science and Engineering: A, 2010, 527: 2087-98

[14] HuangX F, ZhangW Z. Improved age-hardening behavior of Mg-Sn-Mn alloy by addition of Ag and Zn [J]. Materials Science and Engineering: A, 2012, 556: 891-905

[15] KangD H, ParkS S, OhY S, KimN J. Effect of nano-particles on the creep resistance of Mg-Sn based alloys [J]. Materials Science and Engineering: A, 2007, 449-451: 318-21

[16] ChenD, RenY P, GuoY, PeiW L, ZhaoH D, QinG W. Microstructures and tensile properties of as-extruded Mg-Sn binary alloys [J]. Trans. Nonferrous Met. Soc, China, 2010, 20: 1321-1325

[17] ChenggW L, KimH S, YouB S, KooB H. Strength and ductility of novel Mg-8Sn-1Al-1Zn alloys extruded at different speeds [J]. Materials Letters, 2011, 65: 1525-1527

[18] ParkS S, KimY J, ChengW L, KimY M, YouB S. Tensile properties of extruded Mg-8Sn-1Zn alloys subjected to different heat treatments [J]. Philosophical Magazine Letters, 2011, 91: 37-44

[19] LeeS G, JeonJ J, ParkK C, ParkY H, ParkI M. The effects of alloying elements on microstructure and properties of gravity casting Mg-Sn-Al-Si alloy [J]. Materials Chemistry and Physics, 2011, 128: 208-213

[20] TangW N, ParkS S, YouB S. Effect of the Zn content on the microstructure and mechanical properties of indirect-extruded Mg-5Sn-xZn alloys [J]. Materials and Design, 2011, 32: 3537-3543

[21] ParkS S, TangW N, YouB S. Microstructure and mechanical properties of an indirect-extruded Mg-8Sn-1Al-1Zn alloy [J]. Materials Letters, 2010, 64: 31-34

[22] KimY K, SohnS W, KimD H, KimW T, KimD H. Role of icosahedral phase in enhancing the strength of Mg-Sn-Zn-Al alloy [J]. Journal of Alloys and Compounds, 2013, 549: 46-50