Forced response characteristics of bladed disks with mistuning non-linear friction

Abstract

Aimed at the difficulty in revealing the vibration localization mechanism of mistuned bladed disks by using simple non-linear model, a mechanical model of the bladed disk with random mistuning of hysteretic dry friction damping was established. Then, the incremental harmonic balance method was used to analyze the effects of the parameters of bladed disks, such as the mistuning strength of dry friction force, coupled strength, viscous damping ratio and friction strength, on the forced response of the bladed disks. The results show that the vibrational energy localization phenomenon turns up in the tuned bladed disks if the nonlinear friction damping exists, and the random mistuning of the dry friction force intensifies this kind of vibration localization.

Keywords

bladed disk / dry friction damping / random mistuning / incremental harmonic balance method / vibration localization

References

[1] SinhaA., GriffinJ. H.. Effects of static friction on the forced response of frictionally damped turbine blades [J]. Journal of Engineering for Gas Turbines and Power, 1984, 106(1): 65-59

[2] XuZ.-l., ChangD.-f., LiuY.-lin.. Forced response analysis of blade system with dry friction damper using one-bar microslip analytic model [J]. Journal of Vibration Engineering, 2008, 21(5): 505-510

[3] WeiS. T., PierreC.. Effect of dry friction damping on the occurrence of localized forced vibrations in nearly cyclic structures [J]. Journal of Sound and Vibration, 1989, 129(3): 397-416

[4] PetrovE. P.. A method for use of cyclic symmetry properties in analysis of non-linear multi-harmonic vibrations of bladed disks [J]. Journal of Turbomachinery, 2004, 126(1): 175-183

[5] PetrovE. P.. Method for direct parametric analysis of non-linear forced response of bladed disks with friction contact interface [J]. Journal of Turbomachinery, 2004, 126(4): 654-662

[6] CigerogluE., OzguvenH. N.. Non-linear vibration analysis of bladed disks with dry friction dampers [J]. Journal of Sound and Vibration, 2006, 295(3): 1028-1043

[7] ChaD., SinhaA.. Statistics of responses of a mistuned and frictionally damped bladed disk assembly subjected to white noise and narrow band excitations [J]. Probabilistic Engineering Mechanics, 2006, 21(4): 384-396

[8] PetrovE. P., EwinsD. J.. Generic friction models for time-domain vibration analysis of bladed disks [J]. Journal of Turbomachinery, 2004, 126(1): 84-192

[9] WangH.-j., HeE.-m., YuS.-xia.. Forced response characteristics of bladed disk with disordered dry friction [J]. Journal of Aerospace Power, 2006, 21(4): 711-715

[10] CameronT. M., GriffinJ. H.. An alternating frequency/time domain method for calculating the steady-state response of non-linear dynamic systerms [J]. Journal of Applied Mechanics, 1989, 56(1): 149-154

[11] CardonaA.. A multiharmonic method for non-linear vibration analysis [J]. International Journal for Numerical Methods in Engineering, 1994, 37(9): 1593-1608

[12] CheungY. K., ChenS. H., LauS. L.. Application of the incremental harmonic balance method to cubic non-linearity systems [J]. Journal of Sound and Vibration, 1990, 140(2): 273-286

[13] ChenS.-hui.Quantitative analysis methods for strongly nonlinear vibration system [M], 2007, Beijing, Science Press: 171-178

[14] GeorgiadesF., PeetersM., KerschenG., GolinvalJ. C., RuzzeneM.. Localization of energy in a perfectly symmetric bladed disk assembly due to nonlinearities [C]. Proceedings of IMECE2007, 2007, Washington, ASME: 229-237

[15] GeorgiadesF., PeetersM., KerschenG., GolinvalJ. C.. Modal analysis of a non-linear periodic structure with cyclic symmetry [J]. AIAA Journal, 2009, 47(4): 1014-1024