Development of Chinese large-scale space end-effector

Abstract

In order to achieve large tolerance capture and high stiffness connection for space payload operations, a Chinese large-scale space end-effector (EER) was developed. Three flexible steel cables were adopted to capture the payload with large capture allowance. Ball screw transmission mechanism and plane shape-constraint four bar linkage mechanism were utilized to connect the payload with high stiffness. The experiments show that capture tolerances in X, Y, Z, Pitch, Yaw, Roll directions are 100 mm, 100 mm, 120 mm, 10.5°, 10.5°, 12°, respectively. The maximum connection stiffness is 4 800 N·m. The end-effector could meet the requirements for space large tolerance capture and high stiffness connection in the future.

Keywords

large tolerance capture / high stiffness connection / end-effector / flexible steel cable / ball screw / four bar linkage

References

[1] THRONSON H A, AKIN D, GRUNSFELD J, LESTER D. The evolution and promise of robotic in-space servicing [C]// Proceedings of the AIAA SPACE 2009 Conference & Exposition. California, 2009: 1–6.

[2] KITMATCHER G, MAXWELL T G. Further exploration-international space station experience [C]// Proceedings of the SpaceOps 2006 Conference. Rome, 2006: 1–17.

[3] RembalaR., OwerC.. Robotic assembly and maintenance of future space stations based on ISS mission operations experience [J]. Acta Astronautica, 2009, 65: 912-920

[4] ColeshillE., OshinowoL., RembalaR., BinaB., ReyD., SindelarS.. Dextre: Improving maintenance operations on the international space station [J]. Acta Astronautica, 2009, 64: 869-874

[5] NishidaS. I., YoshikawaT.. A new end-effector for on-orbit assembly of a large reflector [C]. Proceedings of the IEEE International Conference on Control, Automation, Robotics and Vision, 2006, Singapore, IEEE Press: 1-6

[6] RembalaR., AzizS.. Increasing the utilization of the ISS mobile service system through ground control [J]. Acta Astronautica, 2007, 61: 691-698

[7] OghenekevweV., RedmondS., HiltzM., RembalaR.. Human and robotic repair of a solar array wing during ISS assembly mission 10A [J]. Acta Astronautica, 2009, 65: 1717-1722

[8] KING D, OWER C. Orbital robotics spiral evolution for future exploration missions [C]// Proceedings of the 8th International Symposium on Artificial Intelligence, Robotics and Automation in Space. Munich, 2005: 1–8.

[9] KAWASAKI K. Overview of JEM-EF on ISS [C]// Proceedings of the RIKEN Symposium. Saitama, 2008: 1–3.

[10] FukazuY., HaraN., KanamiyaY., SatoD.. Reactionless resolved acceleration control with vibration suppression capability for JEMRMS/SFA [C]. Proceedings of the IEEE International Conference on Robotics and Biomimetics, 2009, Bangkok, IEEE Press: 1359-1364

[11] ACQUATELLA P. Development of automation & Robotics in space exploration [C]// Proceedings of the AIAA SPACE 2009 Conference & Exposition. California, 2009: 1–7

[12] HEEMSKERK C J M, VISSER M, VRANCKEN D. Extending ERA’s capabilities to capture and transport large payloads [C]// Proceedings of the 9th ESA Workshop on Advanced Space Technologies for Robotics and Automation. Noordwijk, 2006: 1–8.

[13] InabaN., OdaM.. Autonomous satellite capture by a space robot [C]. Proceedings of the IEEE International Conference on Robotics & Automation, 2000, San Francisco, IEEE Press: 1169-1174

[14] ZhuY.-y., GaoX.-h., XieZ.-w., LiuHong.. Development of a gripper for Chinese space robot [C]. Proceedings of the IEEE International Conference on Mechatronics and Automation, 2006, Luoyang, IEEE Press: 1465-1470

[15] GaoX. H., JinM. H., XieZ. W., JiangL., NiF. L., ShiS. C., WeiR., ZhuY. Y., GaoH. G., LiuH., BeyerA., KraemerE., LandzettelK., SchottJ., HirzingerG.. Development of the Chinese intelligent space robotic system [C]. Proceedings of the IEEE International Conference on Intelligent Robots and Systems, 2006, Beijing, IEEE Press: 994-1001