Operation reliability for on-ramp junction of urban freeway

Abstract

A disorder situation of traffic operation always appears in on-ramp junction area of urban freeway, because the operation action for vehicles presents the weaving condition, especially for different vehicle types. Based on the analysis on the cellular automata theory, and combining with on-site survey data, several key parameters were defined, namely, cellular length, cellular speed, cellular acceleration, updating time interval. In addition, cellular acceleration rule, cellular deceleration rule, random rule, lane-changing rule and other micro-simulation rules were set, and cellular automaton micro-simulation model was set up. Further-more, a micro-simulation module was developed for traffic operation actions of on-ramp junction with Matlab toolbox. Finally, a simulation experiment for traffic operation reliability was done with this micro-simulation module, and the situation of change for on-ramp junction area was obtained under the conditions of different mainline design speed, acceleration lane length, vehicle generation probability and lane-changing probability. The results show that operation reliability for on-ramp junction is determined by the parameters of the probability of vehicle generation and the length of acceleration lane, especially for on-ramp.

Keywords

on-ramp junction / operation reliability / cellular automata / simulation model

References

[1] NagelK., SchrechenbergM.. A cellular automaton model for freeway traffic [J]. J Phys I France, 1992, 2: 2221-2229

[2] LighthillM. J., WhithamG. B.. A theory of traffic flow on long crowded roads [J]. Proc Roy Soc, 1955, 229: 317-345

[3] BANKSJ H.. Flow processes at a freeway bottleneck [J]. Transportation Research Record, 1990, 1287: 20-28

[4] CassidyM. J., BertiniR. L.. Some traffic features at freeway bottlenecks [J]. Transportation Research: Part B, 1999, 32: 49-59

[5] HelbingD., SchrechenbergM.. Cellular automata simulating experimental properties of traffic flow [J]. Phys Rev E, 1999, 59(3): 2505-2508

[6] WolfD. E.. Cellular automata for traffic simulations [J]. Physica A, 1999, 263: 438-451

[7] DongL.-y., XueY., DaiS.-qiang.. One-dimensional cellular automation model of traffic flow based on car-following idea [J]. Applied Mathematics and Mechanics, 2002, 123(4): 363-370

[8] EvansJ. L., ElefteiadouL., GautamN.. Probability of breakdown at freeway merges using Markov chains [J]. Transportation Research: Part B, 2001, 35: 237-254

[9] CassidyM. J., AnaniS. B., HaigwoodJ. M.. Study of freeway traffic near an off-ramp [J]. Transportation Research: Part A, 2002, 36: 563-572

[10] HidasP.. Modeling lane changing and merging in microscopic traffic simulation [J]. Transportation Research: Part C, 2002, 10: 351-371

[11] BertiniR. L., CassidyM. J.. Some observed queue discharge features at a freeway bottleneck downstream of a merge [J]. Transportation Research: Part A, 2002, 36: 683-697

[12] GuoC.-b., ZhangNing.. Simulation study on the road capacity reliability of thruway with exit [J]. Journal of System Simulation, 2003, 15(11): 1595-1599.

[13] PengM.-j., LinJ., XiaoJ.-hua.. Simulation model of road-network flows based on ACO and MAS [J]. Journal of Central South University: Science and Technology, 2005, 36(s): 581-585

[14] CassidyM. J., RudjanakanoknadR.. Increasing the capacity of an isolated merge by metering its on-ramp [J]. Transportation Research: Part B, 2005, 39: 896-913

[15] PEI Yu-long, CI Yu-sheng. Study on traffic flow at on-ramp junctions in urban freeway with cellular automaton model [C]// Proceedings of 2007 International Conference on Management Science & Engineering. Harbin, 2007: 2253–2257.

[16] CI Yu-sheng, WU Li-na, PEI Yu-long, LING Xian-zhang. A new cellular automaton traffic flow model for an off-ramp junction of a Chinese urban expressway [C]// Proceedings of the 9th International Conference of Chinese Transportation Professionals. Harbin, 2009: 1870–1876.