Simulation of stray grain formation during unidirectional solidification of IN738LC superalloy

Abstract

The influence of casting parameters on stray grain formation of a unidirectionally solidified superalloy IN738LC casting with three platforms was investigated by using a 3D cellular automaton-finite element (CAFE) model in CALCOSOFT package. The model was first validated by comparison of the reported grain structure of Al-7%Si (mass fraction) alloy. Then, the influence of pouring temperature, heat flux of the lateral surface, convection heat coefficient of the cooled chill and mean undercooling of the bulk nucleation on the stray grain formation was studied during the unidirectional solidification. The predictions show that the stray grain formation is obviously sensitive to the pouring temperature, heat flux and mean undercooling of the bulk nucleation. However, increasing the heat convection coefficient has little influence on the stray grain formation.

Keywords

computer simulation / unidirectional solidification / stray grain / grain structure

References

[1] YangX. L., NessD., LeeP. D., D’souzaN.. Simulation of stray grain formation during single crystal seed melt-back and initial withdrawal in the Ni-base superalloy CMSX4 [J]. Materials Science and Engineering A, 2005, 413/414: 571-577

[2] WangT. M., SuY. Q., GuoJ. J., OhnakaI., YasudaH.. Structure simulation in unidirectionally solidified turbine blade by dendrite envelope tracking model (II): Model validation and defects prediction [J]. Transactions of Nonferrous Metals Society of China, 2006, 16(4): 753-759

[3] LiuS.-f., KangL.-g., HanH., LiuL.-y., ZouX.-q., GuoH.-he.. Influence of electromagnetic stirring on microstructure of AZ91-0.8%Ce magnesium alloy [J]. Journal of Central South University of Technology, 2006, 13(6): 613-617

[4] ZhouS.-c., BaiC.-g., LeiY., RenZ.-d., CaoP.-j., YangZ.-li.. Effect of low-frequency rotary electromagnetic-field on solidification structure of continuous casting austenitic stainless steel [J]. Journal of Central South University of Technology, 2009, 16(3): 360-364

[5] WangT. M., OhnakaI., YasudaH., SuY. Q., GuoJ. J.. Structure defect prediction of single crystal turbine blade by dendrite envelope tracking model [J]. Transactions of Nonferrous Metals Society of China, 2006, 16(S): 582-585

[6] SpittleJ. A., BrownS. G. R.. Computer simulation of the effect of alloy variable on the grain structures of casting [J]. Acta Metallurgica, 1989, 37(7): 1803-1810

[7] LeeH. N., RyooH. S.. Monte Carlo simulation of microstructure evolution based on grain boundary character distribution [J]. Materials Science and Engineering A, 2000, 29: 176-188

[8] WangL. G., ClancyP.. Kinetic Monte Carlo simulation of the growth of polycrystalline Cu films [J]. Surface Science, 2001, 473(1/2): 25-38

[9] RappazM., GandinC. A.. Probabilistic modeling of microstructure formation in solidification process [J]. Acta Metallurgica et Materialia, 1993, 41(2): 345-360

[10] GandinC. A., RappazM.. A coupled finite element-cellular automaton model for the prediction of dendritic grain structures in solidification process [J]. Acta Metallurgica et Materialia, 1994, 42(7): 2233-2246

[11] SpittleJ. A., BrownS. G. R.. A cellular automaton model of steady-state columnar dendritic growth in binary alloys [J]. Journal of Materials Science, 1995, 30(16): 3989-3994

[12] NastacL.. Numerical modeling of solidification morphologies and segregation patterns in cast dendritic alloys [J]. Acta Mater, 1999, 47(17): 4253-4262

[13] WangT.-m., JinJ.-z., ZhengX.-shu.. A CA/MC model for the simulation of grain structures in solidification processes [J]. Journal of Materials Science, 2002, 37(13): 2645-2650

[14] ZhanX.-h., WeiY.-h., DongZ.-bo.. Cellular automaton simulation of grain growth with different orientation angles during solidification process [J]. Journal of Materials Processing Technology, 2008, 208(1/2/3): 1-8

[15] WangK.-f., LiB.-s., MiG.-f., GuoJ.-j., FuH.-zhi.. Modeling of cell/dendrite transition during the directional solidification of Ti-Al alloy using cellular automaton method [J]. Journal of Iron and Steel Research, 2008, 15(3): 82-86

[16] KermanpurA., VarahramN., DavamiP., RappazM.. Thermal and grain-structure simulation in a land-based turbine blade directionally solidified with the liquid metal cooling process [J]. Metallurgical and Materials Transactions B, 2000, 31(6): 1293-1304