Upper bound analysis of slope stability with nonlinear failure criterion based on strength reduction technique

Abstract

Based on the upper bound limit analysis theorem and the shear strength reduction technique, the equation for expressing critical limit-equilibrium state was employed to define the safety factor of a given slope and its corresponding critical failure mechanism by means of the kinematical approach of limit analysis theory. The nonlinear shear strength parameters were treated as variable parameters and a kinematically admissible failure mechanism was considered for calculation schemes. The iterative optimization method was adopted to obtain the safety factors. Case study and comparative analysis show that solutions presented here agree with available predictions when nonlinear criterion reduces to linear criterion, and the validity of present method could be illuminated. From the numerical results, it can also be seen that nonlinear parameter m, slope foot gradient β, height of slope H, slope top gradient α and soil bulk density γ have significant effects on the safety factor of the slope.

Keywords

nonlinear failure criterion / strength reduction method / upper-bound theorem of limit analysis / slope stability analysis / factor of safety

References

[1] ZhengY.-r., ChenZ.-y., WangG.-x., LingT.-qing.Engineering treatment of slope and landslide [M], 2007, Beijing, China Communication Press: 94-143

[2] CHEN W F. Limit analysis and soil plasticity [M]. Amsterdam: Elsevier, 1975: 244–274.

[3] MichalowskiR. L.. Slope stability analysis: A kinematical approach [J]. Geotechnique, 1995, 45(2): 283-293

[4] AusilioE., ConteE., DenteG.. Stability analysis of slopes reinforced with piles [J]. Computers and Geotechnics, ASCE, 2001, 28(8): 591-611

[5] LiX. P., LiH. S. M., WangC. H.. Stability analysis of slopes reinforced with piles using limit analysis method [C]. Proceedings of Geo-Shanghai International Conference, 2006, Shanghai, Geotechnical Special Publication: 105-112

[6] NianT. K., ChenG. Q., LuanM. T., YangQ., ZhengD. F.. Limit analysis of the stability of slopes reinforced with piles against landslide in nonhomogeneous and anisotropic soils [J]. Canadian Geotechnical Journal, 2008, 45(8): 1092-1103

[7] ZhangX. J., ChenW. F.. Stability analysis of slopes with general nonlinear failure criterion [J]. International Journal for Numerical and Analytical Methods in Geomechanics, 1987, 11(1): 33-50

[8] DrescherA., ChristopoulosC.. Limit analysis slope stability with nonlinear yield condition [J]. International Journal for Numerical and Analytical Methods in Geomechanics, 1988, 12(4): 341-345

[9] CollinsI. F., GunnC. I. M., PenderM. J., YanW.. Slope stability analyses for materials with a non-linear failure envelope [J]. International Journal for Numerical and Analytical in Geomechanics, 1988, 12(5): 533-550

[10] YangX.-l., YinJ.-hua.. Slope stability analysis with nonlinear failure criterion [J]. Journal of Engineering Mechanics, 2004, 130(3): 267-273

[11] YangX.-li.. Upper bound limit analysis of active earth pressure with different fracture surface and nonlinear yield criterion [J]. Theoretical and Applied Fracture Mechanics, 2007, 47(1): 46-56

[12] YangX.-l., HuangFu.. Slope stability analysis considering joined influences of nonlinearity and dilation [J]. Journal of Central South University of Technology, 2009, 16(2): 292-296

[13] LiX.. Finite element analysis of slope stability using a nonlinear failure criterion [J]. Computers and Geotechnics, 2007, 34(1): 127-136

[14] HuW.-d., ZhuX.-n., LiX.-qiang.. Slope stability analysis with nonlinear failure criterion [J]. Journal of Hunan Institute of Science and Technology: Natural Sciences, 2006, 19(3): 85-91

[15] BishopA. W.. The use of the slip circle in the stability analysis of slopes [J]. Geotechique, 1955, 5(1): 7-17