Preparation and sintering of nano Fe coated Si3N4 composite powders

Rui-ming Yin , Jing-lian Fan , Xun Liu

Journal of Central South University ›› 2009, Vol. 16 ›› Issue (2) : 184 -189.

PDF
Journal of Central South University ›› 2009, Vol. 16 ›› Issue (2) : 184 -189. DOI: 10.1007/s11771-009-0031-5
Article

Preparation and sintering of nano Fe coated Si3N4 composite powders

Author information +
History +
PDF

Abstract

Fe/Si3N4 composite powder was synthesized by the heterogeneous precipitation-thermal reduction process, and then pressed into flakes under a pressure of 10 MPa. Flakes were sintered by pressureless and hot-pressing at 1 600 °C under 0.1 MPa N2. The chemical composition, phases and microstructure of composite powder and sintered flakes were investigated by energy dispersive spectroscopy (EDS), X-ray diffraction (XRD), scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The results show that the structure of composite powders is Si3N4 coated by nano Fe. The crystal phases of sintered flakes by pressureless are Fe(Si) compound, SiC and Si3N4. The crystal phases of the sintered samples by hot-pressing are Fe, Fe(Si) compound and Si3N4. It is found that crystal phases flakes obtained by pressureless and hot-pressing are very different.

Keywords

Fe / Si3N4 / coating / heterogeneous precipitation / sintering

Cite this article

Download citation ▾
Rui-ming Yin, Jing-lian Fan, Xun Liu. Preparation and sintering of nano Fe coated Si3N4 composite powders. Journal of Central South University, 2009, 16(2): 184-189 DOI:10.1007/s11771-009-0031-5

登录浏览全文

4963

注册一个新账户 忘记密码

References

[1]

VilaM., CarrapichanoJ. M., GomesJ. R., CamargojrS. S., AcheteC. A., SilvaR. F.. Ultra-high performance of DLC-coated Si3N4 rings for mechanical seals [J]. Wear, 2008, 265(5/6): 940-944

[2]

BelmonteM., de PablosA., OsendiM. I., MiranzoP.. Effects of seeding and amounts of Y2O3-Al2O3 additives on grain growth in Si3N4 ceramics [J]. Materials Science and Engineering A, 2008, 475(1/2): 185-189

[3]

KrnelK., MaglicA., KosmačT.. β-SiAlON/TiN nanocomposites prepared from TiO2-coated Si3N4 powder [J]. Journal of the European Ceramic Society, 2008, 28(5): 953-957

[4]

ShiX.-l., YangH., ShaoG.-q., DuadX.-l., XiongZ.. Microwave sintering of Al2O3/WC-10Co/ZrO2/Ni cermets [J]. Journal of Central South University: Science and Technology, 2007, 38(4): 623-628

[5]

YinR.-m., LiuX., FanJ.-l., LingG.-liang.. Hot pressing densification process for nano Ni-Al2O3 powders [J]. Journal of Central South University: Science and Technology, 2004, 35(1): 21-25

[6]

ZhangQ. C., ShenY. G.. High performance W-AlN cermet solar coatings designed by modelling calculations and deposited by DC magnetron sputtering [J]. Solar Energy Materials and Solar Cells, 2004, 81(1): 25-37

[7]

WangY. G., ZhangD., ChenM.. Development of coating material by in-situ reaction synthesis [J]. Key Engineering Materials, 2007, 353/358(3): 1696-1699

[8]

BrinleyE., SealS., FolksR., BraunsteinE., KramerL.. High efficiency SiO2-TiO2 hybrid sol-gel antireflective coating for infrared applications [J]. Journal of Vacuum Science and Technology A, 2006, 24(4): 1141-1146

[9]

EndoH., MaruiE.. Additional effect of electroless plating film (damping capacity improvement) [J]. Industrial Lubrication and Tribology, 2002, 54(6): 262-267

[10]

MalhotraC. P., MahajanR. L., SampathW. S.. High Knudsen number physical vapor deposition: Predicting deposition rates and uniformity [J]. Journal of Heat Transfer, 2007, 129(11): 1546-1553

[11]

MathurS., ShenH., AltmayerJ.. Nanostructured functional ceramic coatings prepared by molecule-based chemical vapor deposition [J]. Reviews on Advanced Materials Science, 2007, 15(1): 16-23

[12]

ZhuS., LiC., DuJ.-h., HanW.-zheng.. Preparation and characterization of Cu-coated nano SiC composite particles [J]. Key Engineering Materials, 2008, 373/374: 674-677

[13]

PerrardF., DonnadieuP., DeschampsA., BargesP.. TEM study of NbC heterogeneous precipitation in ferrite [J]. Philosophical Magazine, 2006, 86(27): 4271-4284

[14]

ChangS. M., LeeM., KimW. S.. Preparation of large monodispersed spherical silica particles using seed particle growth [J]. J colloid Interface Sci, 2005, 286: 536-542

[15]

NomuraT., AlonsoM., KousakaY., TanakaK.. A model for simultaneous homogeneous and heterogeneous nucleation [J]. J Colloid Interface Sci, 1998, 203: 170-176

[16]

ShenX.-q., JingM.-x., LiW.-x., LiD.-hong.. Fabrication of Fe, Ni and FeNi coated Al2O3 core-shell microspheres by heterogeneous precipitation [J]. Powder Technology, 2005, 160(3): 229-333

[17]

ChenD., LiD.-h., ShenX.-q., JingM.-xiang.. The preparation of nano iron-graphite composite microspheres [J]. Mining and Metallurgical Engineering, 2006, 26(5): 75-78

[18]

PavarajamV., KimuraS.. Catalytic effects of metals on direct nitridation of silicon [J]. J Am Ceram Soc, 2001, 84(8): 1669-1674

[19]

ZhangQ.-tu.. Study on oxidation behavior and oxidation resistance of Si3N4 ceramics [J]. Journal of Ceramic, 2000, 21(1): 23-27

[20]

SwainM. V.Structure and properties of ceramics [M], 1998, New York, Materials Science and Technology Press

[21]

ZhuH.-tao.Hydraulic and pneumatic transmission [M], 2005, Beijing, Tsinghua University Press

[22]

HeikinheimoE., IsomakiI., KodentsovA. A., VanlooF. J. J.. Chemical interaction between Fe and silicon nitride ceramic [J]. Journal of the European Ceramic Society, 1997, 17(1): 25-31

AI Summary AI Mindmap
PDF

118

Accesses

0

Citation

Detail

Sections
Recommended

AI思维导图

/