Microstructure and properties of novel polarization maintaining fiber

Abstract

An improved type of elliptical jacket polarization maintaining fiber was developed by using a modified chemical vapor deposition method with special treatment. Different from conventional elliptical jacket, the shape of the stress jacket was transmuted. The cross-section of fiber consists of 5 layers: substrate, outer cladding, stress jacket, inner cladding and core. The cross sectional component distribution was investigated by electron probe microscopy and energy dispersive spectrum. The finite element method was used to calculate the stress birefringence. Based on the analyses of the microstructure, the technological process is improved. The temperature cycling test of the fiber wound into gyroscope coils was performed. The results show that the fiber possesses superior performance at high and low temperatures compared with other fibers. The high homogeneity is achieved by well-controlled modified chemical vapor deposition process. A homogeneous length of 8 km fiber is obtained. With advantages in homogeneity and length, the fiber has great potential in applications such as fiber gyroscopes, fiber hydrophone and other optical fiber sensors.

Keywords

microstructure / property / elliptical jacket / polarization maintaining fiber / stress applying part

References

[1] HosakaT, SasakiY, NodaJ, et al.. 3 km-long single polarization single mode optical fibers [J]. Electron Letter, 1985, 21: 1023-1025

[2] VinegoniC, WegmullerM, HuttnerB, et al.. All optical switching in a highly birefringent and a standard telecom fiber using a Faraday mirror stabilization scheme[J]. Optics Communications, 2000, 182: 335-341

[3] KhomenkoA V, Garcia-WeidnerA, Tapia-MercadoJ, et al.. High resolution fast response fiber-optic laser calorimeter using a twin interferometric temperature sensor[J]. Optics Communications, 2001, 198: 29-35

[4] SenthilnathanK, PorsezianK. Evolution of polarization of a nonlinear pulse in birefringent fiber with quintic effects [J]. Physics Letters A, 2002, 301: 433-441

[5] SarunS, NabeelA R. Fiber-connected multiwave-length 2 × 2 switch structure using a fiber loop mirror [J]. Optics Communications, 2000, 175: 89-95

[6] HeY Z, nH L, LinX Z, et al.. Four-wave mixing in a fiber loop mirror constructed from two polarization-maintaining dispersion-shifted fibers [J]. Optics Communications, 2000, 184: 277-282

[7] KorneevN. Polarization chaos in nonlinear birefringent resonators[J]. Optics Communications, 2002, 211: 153-157

[8] YangJian-liang, YaoJian-ping, ZhouKe-jiang, et al.. Wideband wavelength tunable fiber ring laser with flattened output power spectrum [J]. Optics Communications, 2002, 210: 313-318

[9] ShanYing, YanFeng-ping, JianShui-sheng. Fiber optic gyroscope and its developments [J]. Journal of Transducer Technology, 1999, 18(5): 1-3(in Chinese)

[10] KuzinE A, KorneevN, HausJ W, et al.. Polarization independent nonlinear fiber sagnac interferometer [J]. Optics Communications, 2000, 183: 389-393

[11] ZhengWen-xin. Automated fusion splicing of polarization maintaining fibers[J]. J Lightwave Technology, 1997, 15: 125-133

[12] KatsuyamaT, MatsumuraH, SuganumaT. Low-loss single polarization fibers [J]. Appl Opt, 1983, 22: 1741-1747

[13] XiaoTian-peng, HeYao-ji, HuangJian-ping, et al.. A novel structure of polarization maintaining optical fiber and its devices[J]. Optical Fiber & Electric Cable, 1997, 1: 33-44(in Chinese)

[14] KaoK C, HockhamG A. Dielectric fiber surface waveguide for optical frequencies[J]. Proc IEEE, 1966, 113: 1151-1154

[15] WatanabeM, MatsudaY. Development of optical fiber technology in Japan[J]. IEEE Electrical Insulation Magazine, 1992, 8(4): 5-15

[16] LiMei-cheng, LiuLi-hua, LiXiang-peng, et al.. Analyses of component distribution in stress applying part by electron probe and the calculation of birefringence[J]. Function Materials, 2004, 35: 358-362(in Chinese)