Atomistic underpinnings for dislocation emission behaviors at the crack tips in FCC metals in light of thermo-kinetic synergy

Abstract

Dislocation emission at the crack tips in faced-centered cubic (FCC) metals generally involves multiple mechanisms of dislocation nucleation dominated by the motion behaviors of atoms near the crack tips. Taking FCC aluminum as a representative, in this work, the emission behaviors and nucleation mechanism of dislocations at the crack tips in FCC metals are investigated in light of the continuum mechanics models within the framework of the anisotropic linear elastic fracture mechanics. The system energy evolution and motion behaviors of atoms near the crack tips under Mode I loading conditions are obtained first by performing molecular dynamics simulations. The underlying thermo-kinetic origins of dislocation emission are clarified based on driving force U and energy barrier Q_k for dislocation emission at the crack tips acquired from system energy variations. As the applied load rises, the value of U increases while that of Q_k decreases, accelerating the dislocation emission process. The magnitude of Q_k is proportional to the dislocation nucleation energy Q, which depends on the extrema of the generalized stacking fault (SF) energy curve along the dislocation emission direction (including the unstable SF energy γ_usf, intrinsic SF energy γ_isf, and unstable twinning fault energy γ_utf). When abnormal fluctuations appear in the system energy evolution curve, the energy barrier Q_k for dislocation emission undergoes a sudden change, signifying the transition of the dislocation nucleation mechanism. Accordingly, a thermo-kinetic criterion for the mechanism transition of dislocation nucleation at the crack tips in FCC metals is proposed. Our investigation provides an innovative thermo-kinetic perspective to understand the dislocation emission behaviors and the critical conditions for maintaining stability at the crack tips of FCC metals.

Keywords

Fracture toughness / FCC metals / dislocation nucleation mechanism / stacking fault energy / dislocation emission behaviors / thermo-kinetic synergy

References

[1] Salvado FC,Walley SM,Cardoso JB.A review on the strain rate dependency of the dynamic viscoplastic response of FCC metals.Prog Mater Sci2017;88:186-231

[2] Li H.Transition of deformation and fracture behaviors in nanostructured face-centered-cubic metals.Appl Phys Lett2004;84:4307-9

[3] He BB,Yen HW.High dislocation density-induced large ductility in deformed and partitioned steels.Science2017;357:1029-32

[4] Li H,Shang S,Liu F.3D misfit potentials dependent deformation behaviors with respect to different dislocation core structures of fcc metals.Phys Rev Mater2025;9:063604

[5] Paul MJ,Ramamurty U.The importance of fracture toughness evaluation for additively manufactured metals.Acta Mater2024;276:120061

[6] Carlsson AE.Fracture toughness of materials: from atomistics to continuum theory.Solid State Phys1998;51:233-80

[7] Ma J,Zong Y,Shan D.Crack-tip cleavage/dislocation emission competition behaviors/mechanisms in magnesium: ALEFM prediction and atomic simulation.Int J Plast2024;182:104134

[8] Armstrong R.Cleavage crack propagation within crystals by the Griffith mechanism versus a dislocation mechanism.Mater Sci Eng1966;1:251-4

[9] Argon A.Brittle to ductile transition in cleavage fracture.Acta Metall1987;35:185-96

[10] Rice JR.Ductile versus brittle behaviour of crystals.Philos Mag1974;29:73-97

[11] Peierls R.The size of a dislocation.Proc Phys Soc1940;52:34-7

[12] Rice JR.Dislocation nucleation from a crack tip: an analysis based on the Peierls concept.J Mech Phys Solids1992;40:239-71

[13] Nabarro FRN.Dislocations in a simple cubic lattice.Proc Phys Soc1947;59:256-72

[14] Brocks W.Elastic-plastic fracture mechanics. In Plasticity and Fracture. Cham: Springer International Publishing; 2018. pp. 49-84.

[15] Andric P.New theory for Mode I crack-tip dislocation emission.J Mech Phys Solids2017;106:315-37

[16] Xu G,Ortiz M.Nucleation of dislocations from crack tips under mixed modes of loading: implications for brittle against ductile behaviour of crystals.Philos Mag A1995;72:415-51

[17] Gumbsch P.On the continuum versus atomistic descriptions of dislocation nucleation and cleavage in nickel.Model Simul Mater Sci Eng1995;3:597-613

[18] Kelly A,Cottrell AH.Ductile and brittle crystals.Philos Mag1967;15:567-86

[19] Schoeck G.The emission of dislocations from crack tips.Mater Sci Eng A2003;356:93-101

[20] Schoeck G.Dislocation emission from crack tips as a variational problem of the crack energy.J Mech Phys Solids1996;44:413-37

[21] Zamora RJ,Hennig RG.Ab initio prediction of environmental embrittlement at a crack tip in aluminum.Phys Rev B2012;86:060101

[22] Tadmor E.A Peierls criterion for the onset of deformation twinning at a crack tip.J Mech Phys Solids2003;51:765-93

[23] Yamakov V,Zamora R,Curtin W.Investigation of crack tip dislocation emission in aluminum using multiscale molecular dynamics simulation and continuum modeling.J Mech Phys Solids2014;65:35-53

[24] Knap J.Crack tip dislocation nucleation in FCC solids.Phys Rev Lett1999;82:1700-3

[25] He X,Li X.Modeling of Mode I crack-tip dislocation nucleation in three FCC materials: Ni, Cu and Al.Mech Mater2024;196:105068

[26] Van Swygenhoven, H.; Derlet, P.; Frøseth, A. Nucleation and propagation of dislocations in nanocrystalline fcc metals.Acta Mater2006;54:1975-83

[27] Andric P.New theory for crack-tip twinning in fcc metals.J Mech Phys Solids2018;113:144-61

[28] Hai S.Deformation twinning at aluminum crack tips.Acta Mater2003;51:117-31

[29] Andric P.Atomistic modeling of fracture.Model Simul Mater Sci Eng2019;27:013001

[30] Argon AS,Ortiz M.Kinetics of dislocation emission from crack tips and the brittle to ductile transition of cleavage fracture.MRS Online Proc Libr1995;409:29-44

[31] Gulizzi V,Milazzo A.A novel boundary element formulation for anisotropic fracture mechanics.Theor Appl Fract Mech2019;104:102329

[32] Zhu S.On the role of twinning and stacking faults on the crystal plasticity and grain refinement in magnesium alloys.Acta Mater2018;144:365-75

[33] Stroh AN.Dislocations and cracks in anisotropic elasticity.Philos Mag1958;3:625-46

[34] Mishin Y,Mehl MJ.Interatomic potentials for monoatomic metals from experimental data and ab initio calculations.Phys Rev B1999;59:3393

[35] Du J,Zhao C.Towards mechanical performance paradox and behind thermo-kinetic origins of aluminum alloys with additional solutes (X = Mg, Cu and Si) from atomistic simulations.J Mater Inf2025;5:10

[36] Bitzek E,Gähler F,Gumbsch P.Structural relaxation made simple.Phys Rev Lett2006;97:170201

[37] Brunner F,Maresca F.An atomistic K-test framework for general grain boundaries and triclinic single crystals.Model Simul Mater Sci Eng2025;33:035004

[38] Kou Z,Yang L,Huang B.Deformation twinning in response to cracking in Al: an in situ TEM and molecular dynamics study.Scr Mater2018;145:28-32

[39] Yarema SY.On the contribution of G. R. Irwin to fracture mechanics.Mater Sci1996;31:617-23

[40] Griffith AA.VI. The phenomena of rupture and flow in solids.Phil Trans R Soc Lond A1921;221:582-93

[41] Du J,Zhang Z.Deformation behaviors in light of dislocation core characteristics with respect to the compositional-dependent misfit potentials of aluminum alloys.J Mater Res Technol2023;27:4366-77

[42] Zhang Z,Cai T.Effects of stacking fault energy on the deformation mechanisms and mechanical properties of face-centered cubic metals.Acta Metall Sin2023;59:467-77 (in Chinese)

[43] Ren S,Fang Q.Effect of solid solution addition on the dislocation emission in aluminum alloys.Acta Mech2020;231:4537-45

[44] Sheng Y,Ma W.Interaction of dislocations and cracks in grains based on discrete dislocations.Int J Fract2023;239:135-47

[45] Zeng G,Xiong C.Enhanced fatigue crack propagation resistance of Al-Cu-Li alloys via regulating grain structure and precipitation behavior.Int J Fatigue2025;197:108916

[46] Lu Z,Li Y,Zeng X.Machine learning driven design of high-performance Al alloys.J Mater Inf2024;4:19

[47] Liu J,Meng J.Microstructural stability and stress rupture properties of a third-generation Ni base single crystal supalloy.Acta Metall Sin2024;60:770-6 (in Chinese)

[48] Wang K,Zhou Y,Xin R.Dislocation slip and crack nucleation mechanism in dual-phase microstructure of titanium alloys: a review.Acta Metall Sin2023;36:353-65

[49] Tan K,Qin H.Effects of Co and Nb on the crack of additive manufacturing nickel-based superalloys.Acta Metall Sin2024;37:1601-10

[50] Liu L,Fan T,Zhang Y.The possibilities to lower the stacking fault energies of aluminum materials investigated by first-principles energy calculations.Comput Mater Sci2015;108:136-46