Towards mechanical performance paradox and behind thermo-kinetic origins of aluminum alloys with additional solutes (X = Mg, Cu and Si) from atomistic simulations

Abstract

Dislocation glide and/or deformation twinning, which can be uniformly described as the kinetic behaviors of atoms driven by thermodynamics, play important roles in dominating mechanical performance and strength-ductility paradox of metallic alloys. In this work, the physical origins behind the mechanical performance paradox are investigated in light of thermo-kinetic synergy upon materials processing. Combining the classical dislocation theories with common strengthening mechanisms, the quantitative connections among yield strength, plastic strain and dislocation density are bridged by the driving force and energy barrier of dislocation motion. The FCC-Al and Al alloys with Mg, Cu and Si solutes are studied as typical representatives by performing molecular dynamics (MD) simulations to analyze the tensile behaviors. It turns out that the thermo-kinetic synergy is responsible for the strength-ductility exclusive behaviors. The yield strength and flow stress are enhanced with Mg, Cu and Si solutes adding in FCC-Al, due to the increased interactions between dislocations and solute atoms. All the Mg, Cu and Si solutes can benefit the mechanical responses of Al alloys. Increasing Mg content enhances the driving force and yield stress of Al-Mg alloys, but reduces the energy barrier and plastic strain. The solute Si addition can further increase the driving force and yield stress, but decrease the energy barrier and plastic strain of Al-Mg-Si alloys. Our investigation provides an innovative viewpoint for understanding the mechanical performance paradox of metallic alloys, and offers insightful guidance for designing advanced Al alloys with good mechanical performance.

Keywords

Mechanical performance paradox / deformation behaviors / thermo-kinetic synergy / dislocation motion / aluminum alloys

References

[1] Chen JH,van Huis MA,Zandbergen HW.Atomic pillar-based nanoprecipitates strengthen AlMgSi alloys.Science2006;312:416-9

[2] Zhang J,Pang X.Deformation-induced concurrent formation of 9R phase and twins in a nanograined aluminum alloy.Acta Mater2023;244:118540

[3] Raabe D,Uggowitzer PJ.Making sustainable aluminum by recycling scrap: the science of “dirty” alloys.Prog Mater Sci2022;128:100947

[4] Liddicoat PV,Zhao Y.Nanostructural hierarchy increases the strength of aluminium alloys.Nat Commun2010;1:63

[5] Costa Teixeira J, Cram D, Bourgeois L, Bastow T, Hill A, Hutchinson C. On the strengthening response of aluminum alloys containing shear-resistant plate-shaped precipitates.Acta Mater2008;56:6109-22

[6] Simar A,de Meester B,Pardoen T.Sequential modeling of local precipitation, strength and strain hardening in friction stir welds of an aluminum alloy 6005A-T6.Acta Mater2007;55:6133-43

[7] Ogura T,Hirose A.Improvement of strength and ductility of an Al–Zn–Mg alloy by controlling grain size and precipitate microstructure with Mn and Ag addition.Mater Sci Eng A2013;580:288-93

[8] Macías JG, Douillard T, Zhao L, Maire E, Pyka G, Simar A. Influence on microstructure, strength and ductility of build platform temperature during laser powder bed fusion of AlSi10Mg.Acta Mater2020;201:231-43

[9] Chen X,Du J.Synergistic mechanism of hetero-structured Al–Mg–Si–Cu–Zn–Fe–Mn alloys with greatly enhanced strength, ductility and formability.Mater Sci Eng A2024;910:146893

[10] Ma E.Tailoring heterogeneities in high-entropy alloys to promote strength-ductility synergy.Nat Commun2019;10:5623 PMCID:PMC6901531

[11] Ma E.Towards strength–ductility synergy through the design of heterogeneous nanostructures in metals.Mater Today2017;20:323-31

[12] Du J,Zhang Z.Mechanical behaviors of metallic alloys dominated by thermo-kinetic synergistic effects upon materials processing.Mater Today Commun2023;37:107218

[13] Hu X,Chen Y.Structure-property modeling scheme based on optimized microstructural information by two-point statistics and principal component analysis.J Mater Inf2022;2:5

[14] Wang WY,Chai Z.Big data-assisted digital twins for the smart design and manufacturing of advanced materials: from atoms to products.J Mater Inf2022;2:1

[15] Fan L,Zhao Y.Ultrahigh strength and ductility in newly developed materials with coherent nanolamellar architectures.Nat Commun2020;11:6240 PMCID:PMC7721903

[16] Wang F,Chen X.Superior strength–ductility combination in Al alloys via dislocation gradient structure.Mater Res Lett2023;11:347-53

[17] Lu Q,Chen H.Simultaneously enhanced strength and ductility of 6xxx Al alloys via manipulating meso-scale and nano-scale structures guided with phase equilibrium.J Mater Sci Technol2020;41:139-48

[18] Du J,Zhang Y,Xiong S.Atomistic determination on stability, cluster and microstructures in terms of crystallographic and thermo-kinetic integration of Al−Mg−Si alloys.Mater Today Commun2020;24:101220

[19] Du J.Composition-structure-property correlations of complex metallic alloys described by the “cluster-plus-glue-atom” model.Appl Mater Today2017;7:13-46

[20] Leyson G,Curtin W.Solute strengthening from first principles and application to aluminum alloys.Acta Mater2012;60:3873-84

[21] Shercliff H.A process model for age hardening of aluminium alloys - II. Applications of the model.Acta Metall Mater1990;38:1803-12

[22] Sun W,Marceau R.Precipitation strengthening of aluminum alloys by room-temperature cyclic plasticity.Science2019;363:972-5

[23] Liu G,Nan C.Experiment and multiscale modeling of the coupled influence of constituents and precipitates on the ductile fracture of heat-treatable aluminum alloys.Acta Mater2005;53:3459-68

[24] Du J,Melnik R.Cluster characteristics and physical properties of binary Al–Zr intermetallic compounds from first principles studies.Comput Mater Sci2015;103:170-8

[25] Du J,Zhang L,Liu F.Quantitative and qualitative correlations by atomistic determination for the precipitated phases in Al–Li–Cu system.Intermetallics2019;112:106551

[26] Bardel D,Nelias D.Coupled precipitation and yield strength modelling for non-isothermal treatments of a 6061 aluminium alloy.Acta Mater2014;62:129-40

[27] Vannarat S,Kawazoe Y.First-principles study of solute-dislocation interaction in aluminum-rich alloys.Phys Rev B2001;64:224203

[28] Zhang X,Zhang B,Kan Q.Dislocation–grain boundary interaction-based discrete dislocation dynamics modeling and its application to bicrystals with different misorientations.Acta Mater2021;202:88-98

[29] Gorbatov O,Gornostyrev Y.Effective cluster interactions and pre–precipitate morphology in binary Al-based alloys.Acta Mater2019;179:70-84

[30] Bignon M,Robson JD.Interactions between plastic deformation and precipitation in aluminium alloys: a crystal plasticity model.Acta Mater2023;247:118735

[31] Krasnikov V,Pogorelko V,Ebel A.Interaction of dislocation with GP zones or θ" phase precipitates in aluminum: atomistic simulations and dislocation dynamics.Int J Plast2020;125:169-90

[32] Niewczas M,Mishra R.Thermally activated flow of dislocations in Al–Mg binary alloys.Acta Mater2015;83:372-82

[33] Fan H,El-Awady JA,Zaiser M.Strain rate dependency of dislocation plasticity.Nat Commun2021;12:1845 PMCID:PMC7988163

[34] Chen M,Hemker KJ,Wang Y.Deformation twinning in nanocrystalline aluminum.Science2003;300:1275-7

[35] Mahajan S.Formation of deformation twins in f.c.c. crystals.Acta Metall1973;21:1353-63

[36] Du J,Zhang Z.Deformation behaviors in light of dislocation core characteristics with respect to the compositional-dependent misfit potentials of aluminum alloys.J Mater Res Technol2023;27:4366-77

[37] Liu F.Nucleation/growth design by thermo-kinetic partition.J Mater Sci Technol2023;155:72-81

[38] He Y,Du J.Thermo-kinetic connectivity by integrating thermo-kinetic correlation and generalized stability.J Mater Sci Technol2022;127:225-35

[39] Huang L,Zhang Y.Generalized stability criterion for exploiting optimized mechanical properties by a general correlation between phase transformations and plastic deformations.Acta Mater2020;201:167-81

[40] Wang T.Multiscale thermo-kinetic characterization for β′ and β1 precipitation in Mg-Sm alloys.Acta Mater2023;254:119011

[41] Wang T.Optimizing mechanical properties of magnesium alloys by philosophy of thermo-kinetic synergy: review and outlook.J Magnes Alloys2022;10:326-55

[42] Zhang Y,Liu F.Thermo-kinetic orientation study on interface behavior of polycrystalline Cu-Nb composite by crystal plasticity finite element method.Mater Design2022;223:111215

[43] Liu Y,Shang S.Insights into plastic deformation mechanisms of austenitic steels by coupling generalized stacking fault energy and semi-discrete variational Peierls-Nabarro model.Prog Nat Sci Mater Int2023;33:83-91

[44] Zhang Y,Wang K,Li S.Application of non-equilibrium dendrite growth model considering thermo-kinetic correlation in twin-roll casting.J Mater Sci Technol2020;44:209-22

[45] Du J,Liu Y.Strength-ductility trade-off modulated by thermo-kinetic synergy of heat-treatable aluminum alloys.J Mater Res Technol2023;24:7876-95

[46] Liu Y,Zhang K.Orientation-dependent mechanical behaviors of BCC-Fe in light of the thermo-kinetic synergy of plastic deformation.Materials2024;17:2395 PMCID:PMC11122783

[47] Chen H,Ji G.Experimental and modelling assessment of ductility in a precipitation hardening AlMgScZr alloy.Int J Plast2021;139:102971

[48] Yang M,Hu Z.Shearing and rotation of β″ and βʹ precipitates in an Al-Mg-Si alloy under tensile deformation: in-situ and ex-situ studies.Acta Mater2021;220:117310

[49] Kocks UF,Ashby MF. Thermodynamics and kinetics of slip. 1975. https://api.semanticscholar.org/CorpusID:137701656. (accessed 2025-02-11)

[50] Argon A.Strengthening mechanisms in crystal plasticity. Oxford University Press, 2008.

[51] Cheng LM,Embury JD.The influence of precipitation on the work-hardening behavior of the aluminum alloys AA6111 and AA7030.Metall Mater Trans A2003;34:2473-81

[52] Myhr OR,Andersen SJ.Modelling of the age hardening behaviour of Al–Mg–Si alloys.Acta Mater2001;49:65-75

[53] Hansen N.Hall–Petch relation and boundary strengthening.Scr Mater2004;51:801-6

[54] Esmaeili S,Poole W.A yield strength model for the Al-Mg-Si-Cu alloy AA6111.Acta Mater2003;51:2243-57

[55] Arsenlis A.Modeling the evolution of crystallographic dislocation density in crystal plasticity.J Mech Phys Solids2002;50:1979-2009

[56] Orowan E.Problems of plastic gliding.Proc Phys Soc1940;52:8-22

[57] Pan B,Tanaka H.Dislocation-based constitutive model of crystal plasticity for the size effect of single crystalline micropillar samples.Mech Eng J2016;3:15-00602

[58] Caillard D.Chapter 8 - Dislocation climb. In: Thermally activated mechanisms in crystal plasticity. Amsterdam: Elsevier. 2003;8:281-319.

[59] Wang S,Wang Y.Activation volume and density of mobile dislocations in hydrogen-charged iron.Acta Mater2013;61:4734-42

[60] Plimpton S.Fast parallel algorithms for short-range molecular dynamics.J Comput Phys1995;117:1-19

[61] Jelinek B,Horstemeyer MF.Modified embedded atom method potential for Al, Si, Mg, Cu, and Fe alloys.Phys Rev B2012;85:245102

[62] Hue DT, Tran V, Nguyen V, Van Lich L, Dinh V, Nguyen T. High strain-rate effect on microstructure evolution and plasticity of aluminum 5052 alloy nano-multilayer: a molecular dynamics study.Vacuum2022;201:111104

[63] Zhang L,Huang X,Liu M.Grain boundary induced deformation mechanisms in nanocrystalline Al by molecular dynamics simulation: from interatomic potential perspective.Comput Mater Sci2019;156:421-33

[64] Xu Y,Zhu F.A molecular dynamic study of nano-grinding of a monocrystalline copper-silicon substrate.Appl Surf Sci2019;493:933-47

[65] Fan H.Towards resolving the anonymity of pyramidal slip in magnesium.Mater Sci Eng A2015;644:318-24

[66] Xing Z,Tang J,Kang G.Molecular dynamics simulation on the cyclic deformation of magnesium single crystals.Comput Mater Sci2021;186:110003

[67] Sun X,Peng M.Classical molecular dynamics simulation of atomic structure transitions in FeSiCuMgAl high-entropy alloys under biaxial stretching.Mater Today Commun2024;40:109716

[68] Husain A,Hongzheng Y.Molecular dynamics as a means to investigate grain size and strain rate effect on plastic deformation of 316 L nanocrystalline stainless-steel.Materials2020;13:3223 PMCID:PMC7411801

[69] Sainath G.Orientation dependent deformation behaviour of BCC iron nanowires.Comput Mater Sci2016;111:406-15

[70] Stukowski A.Visualization and analysis of atomistic simulation data with OVITO - the Open Visualization Tool.Modell Simul Mater Sci Eng2010;18:015012

[71] Stukowski A,Arsenlis A.Automated identification and indexing of dislocations in crystal interfaces.Modell Simul Mater Sci Eng2012;20:085007

[72] Sendrowicz A,Yasnikov I.Stored and dissipated energy of plastic deformation revisited from the viewpoint of dislocation kinetics modelling approach.Acta Mater2022;237:118190

[73] Li Z,Jia Z,Xie Z.Effects of Mg and Si contents on the microstructure and mechanical properties of AA6014 alloys in T4P and T6P temper.Mater Sci Eng A2019;740-1:187-200

[74] Khangholi SN,Maltais A.Effect of Ag and Cu addition on the strength and electrical conductivity of Al-Mg-Si alloys using conventional and modified thermomechanical treatments.J Alloys Compd2022;914:165242

[75] Zhu L,Zhang J.Effect of silicon content on nucleation and growth of multiscale precipitates in Al–Mg–Si–Cu–Zn alloys for different aging paths.Mater Sci Eng A2022;841:143016

[76] Zepeda-Ruiz LA,Oppelstrup T.Probing the limits of metal plasticity with molecular dynamics simulations.Nature2017;550:492-5

[77] Wei Y,Gao H.Enhanced strain-rate sensitivity in fcc nanocrystals due to grain-boundary diffusion and sliding.Acta Mater2008;56:1741-52

[78] Ma K,Hu T.Mechanical behavior and strengthening mechanisms in ultrafine grain precipitation-strengthened aluminum alloy.Acta Mater2014;62:141-55

[79] Kamikawa N,Tsuji N.Strengthening mechanisms in nanostructured high-purity aluminium deformed to high strain and annealed.Acta Mater2009;57:4198-208

[80] Frigaard Ø,Midling OT.A process model for friction stir welding of age hardening aluminum alloys.Metall Mater Trans A2001;32:1189-200

[81] Starink M,Wang S.The strength of friction stir welded and friction stir processed aluminium alloys.Scr Mater2008;58:377-82

[82] Mahata A.Evolution of solidification defects in deformation of nano-polycrystalline aluminum.Comput Mater Sci2019;163:176-85

[83] Kadau K,Holian BL.Molecular-dynamics study of mechanical deformation in nano-crystalline aluminum.Metall Mater Trans A2004;35:2719-23

[84] Hocker S,Binkele P,Schmauder S.Molecular dynamics simulations of tensile tests of Ni-, Cu-, Mg- and Ti-alloyed aluminium nanopolycrystals.Comput Mater Sci2016;116:32-43

[85] Lee B,Park J,Lee J.Role of Mg in simultaneously improving the strength and ductility of Al–Mg alloys.Mater Sci Eng A2016;657:115-22

[86] Remøe MS,Westermann I,Røyset J.The effect of alloying elements on the ductility of Al-Mg-Si alloys.Mater Sci Eng A2017;693:60-72

[87] Matsuda K,Sato T,Ikeno S.Cu segregation around metastable phase in Al-Mg-Si alloy with Cu.Mater Trans2007;48:967-74

[88] Tian Y,Zhang Z.Ductility sensitivity to stacking fault energy and grain size in Cu–Al alloys.Mater Res Lett2016;4:112-7

[89] Van Swygenhoven, H.; Derlet, P. M.; Frøseth, A. G. Stacking fault energies and slip in nanocrystalline metals.Nat Mater2004;3:399-403

[90] An X,Zhang Z,Gao N.Enhanced strength–ductility synergy in nanostructured Cu and Cu–Al alloys processed by high-pressure torsion and subsequent annealing.Scr Mater2012;66:227-30

[91] Vitek V.Atomic level computer modelling of crystal defects with emphasis on dislocations: past, present and future.Prog Mater Sci2011;56:577-85

[92] Bajaj D.Uncovering all possible dislocation locks in face-centered cubic materials.Int Jo Plast2024;181:104101

[93] Su R,Xue S.Deformation mechanisms in FCC Co dominated by high-density stacking faults.Mater Sci Eng A2018;736:12-21

[94] Takeuchi A.Classification of bulk metallic glasses by atomic size difference, heat of mixing and period of constituent elements and its application to characterization of the main alloying element.Mater Trans2005;46:2817-29

[95] Zhang Z,Zhang K,Song K.An aging processing design scheme derived from precipitation thermo-kinetic synergy of heat-treatable aluminum alloys.Mater Sci Eng A2025;919:147505

[96] Seeger A,Mader S.Work-hardening and work-softening of face-centred cubic metal crystals.Philos Mag1957;2:323-50

[97] Yang C,Lee T.Work-softening and anneal-hardening behaviors in fine-grained Zn–Al alloys.J Alloys Compd2009;468:230-6

[98] Devaney RJ,O’donoghue PE.A dislocation mechanics constitutive model for effects of welding-induced microstructural transformation on cyclic plasticity and low-cycle fatigue for X100Q bainitic steel.Int J Fatigue2021;145:106097