Production of mahogany sawdust reinforced LDPE wood–plastic composites using statistical response surface methodology

Abstract

We produced wood–plastic composite board by using sawmill wastage of mahogany (Swietenia macrophylla) wood and low density polyethylene. We used multi-response optimization to optimize the process parameters of composite board production including mixing ratio, fire retardant (%) and pressing time (min). We investigated the effects of these three process parameters in the mechanical and physical properties of the composite board. Afterwards, Box–Behnken design was performed as response surface methodology with desirability functions to attain the optimal level of mixing ratio, fire retardant and pressing time (min). The maximum modulus of elasticity (MOE) and modulus of rupture (MOR) were achieved at the optimal conditions of wood plastic mixing ratio of 60:40, pressing time of 9 min and zero fire retardant percentage. The optimized MOR and MOE were 13.12 and 1,781.0 N mm⁻², respectively.

Keywords

Wood plastic composite / LDPE / Mechanical properties / Physical properties / Response surface methodology

References

[1] ASTM D1037-12 (2012) Standard test methods for evaluating properties of wood-base fiber and particle panel materials. ASTM International, West Conshohocken

[2] ASTM D790-10 (2010) Standard test methods for flexural properties of unreinforced and reinforced plastics and electrical insulating materials. ASTM International, West Conshohocken

[3] Atuanya CU, Ibhadode AOA, Igboanugo AC. Potential of using recycled low-density polyethylene in wood composites board. Afr J Environ Sci Technol, 2011, 5(5): 389-396.

[4] Ayrilmis N, Benthien JT, Thoemen H, White RH. Effects of fire retardants on physical, mechanical, and fire properties of flat-pressed WPCs. Eur J Wood Wood Prod, 2011, 70: 215-224.

[5] Ayrilmis N, Akbulut T, Dundar T, White RH, Mengeloglu F, Buyuksari U, Candan Z, Avci E. Effect of boron and phosphate compounds on physical, mechanical, and fire properties of wood–polypropylene composite. Constr Build Mater, 2012, 33: 63-69.

[6] Azizi K, Tabarsa T, Ashori A. Performance characterizations of particleboards made with wheat straw and waste veneer splinters. Compos B, 2011, 42(7): 2085-2089.

[7] Benthien JT, Thoemen H. Effects of raw materials and process parameters on the physical and mechanical properties of flat pressed WPC panels. Compos A Appl Sci Manuf, 2012, 43(4): 570-576.

[8] Box GP, Behnken DW. Some new three level design for the study of quantitative variables. Technometrics, 1960, 2(4): 456-475.

[9] Chen JH, Zhong JC, Cai YH, Su WB, Yang YB. Morphology and thermal properties in the binary blends of poly (propylene-co-ethylene) copolymer and isotactic polypropylene with polyethylene. Polymer, 2007, 48(10): 2946-2957.

[10] Islam MA, Sakkas V, Albanis TA. Application of statistical design of experiment with desirability functions for the removal of organophosphorus pesticide from aqueous solution by low cost material. J Hazard Mater, 2009, 170(1): 230-238.

[11] Islam MA, Nikoloutsou Z, Sakkas V, Papatheodorou M, Albanis TA. Statistical optimization by combination of response surface methodology and desirability function for removal of azo dye from aqueous solution. Int J Environ Anal Chem, 2010, 90: 495-507.

[12] Islam MA, Alam MR, Hannan MO. Multiresponse optimization based on statistical response surface methodology and desirability function for the production of particleboard. Compos B Eng, 2012, 43(3): 861-868.

[13] Kuo M, Adams D, Myers D, Curry D, Heemstra K, Smith J, Bian Y. Properties of wood agricultural fiberboard bonden with soybean-based adhesives. For Prod J, 1998, 48(2): 71-75.

[14] Lee H, Kim HJ, Park HJ. Performance of paper sludge/polypropylene fiber/linocellulosic fiber composites. J Ind Eng Chem, 2002, 8(1): 50-56.

[15] Leu SY, Yang TH, Lo SF, Yang TH. Optimized material composition to improve the physical and mechanical properties of extruded wood–plastic composites (WPCs.). Constr Build Mater, 2011, 29: 120-127.

[16] Myers RH, Montgomery DC. Response surface methodology: process and product optimization using designed experiments, 2001 2 New York: Wiley

[17] Najafi SK, Kiaefar A, Hamidina E, Tajvidi M. Water absorption behavior of composites from sawdust and recycled plastics. J Reinf Plast Compos, 2007, 26(3): 341-348.

[18] Nirdosha G, Setunge S, Jollands M. Fragomeni S, Venkatesan S, Lam NTK, Setunge S. Design of experiments (DOE) for investigating particleboard production. Incorporating sustainable practice in mechanics of structures and materials. 2011, London: Taylor & Francis Group

[19] Obidiegwu MU, Nwosu CT. Mechanical and flammability properties of low density polyethylene/ALSTONIA BOONEI wood fiber composite. Asian J Nat Appl Sci, 2012, 1(2): 53-62.

[20] Panshin AJ, De Zeewe C. Textbook of wood technology, 1980 4 New York: McGraw – Hill Book Company, Inc, 1 402

[21] Pramila R, Ramesh KV. Biodegradation of low density polyethylene (LDPE) by fungi isolated from municipal landfill area. J Microbiol Biotechnol, 2011, 1(4): 131-136.

[22] Pritchard G. Two technologies merge: wood plastic composites. Plast Addit Compd, 2004, 6(4): 18-21.

[23] Rahim S (2009) Wood waste utilization for wood composite industries in Malaysia. Paper presented at Asia Pacific Forest Products Workshop, 14 Dec

[24] Stark NM, White HR, Mueller SA, Osswald TA. Evaluation of various fire retardants for use in wood flour-polyethylene composites. Polym Degrad Stab, 2010, 95(9): 1903-1910.

[25] Tabarsa T, Ashori A, Gholamzadeh M. Evaluation of surface roughness and mechanical properties of particleboard panels made from bagasse. Compos B Eng, 2011, 42(5): 1330-1335.

[26] Tamrakar S, Lopez-Anido RA. Water absorption of wood polypropylene composite sheet piles and its influence on mechanical properties. Constr Build Mater, 2011, 25(10): 3977-3988.

[27] Yamashita Y, Watanabe H, Takeda S. Rubber wood characteristics of its supply and development of its utilization. For Resour, 1999, 71: 65-70.

[28] Yang WJ, Xie YJ, Wang HG, Liu BY, Wang QW. Impacts of freezing and thermal treatments on dimensional and mechanical properties of wood flour-HDPE composite. J For Res, 2013, 24(1): 143-147.

[29] Youngquist JA, Krzysik AM, Chow P, Meimban R, et al. Roger RM, et al. Properties of composite panels. Paper and composites from agro-based resources. 1997, Boca Raton: CRC Lewis Publisher, 309 311

[30] Yuan FP, Ou RX, Xie YJ, Wang QW. Reinforcing effects of modified Kevlar^® fiber on the mechanical properties of wood-flour/polypropylene composites. J For Res, 2013, 24(1): 149-153.

[31] Zhang ZT, Sun ZB, Yang XH, Dong YH. Manufacturing composite from regenerated wood fiber and polyethylene via paten-pressing process. Adv Mater Res, 2013, 645: 39-42.

[32] Zhao J, Wang XM, Chang JM, Zheng K. Optimization of processing variables in wood–rubber composite panel manufacturing technology. Bioresour Technol, 2008, 99(7): 2384-2391.