Propagation behavior of acoustic wave in wood

Abstract

We used acoustic tests on a quarter-sawn poplar timbers to study the effects of wood anisotropy and cavity defects on acoustic wave velocity and travel path, and we investigated acoustic wave propagation behavior in wood. The timber specimens were first tested in unmodified condition and then tested after introduction of cavity defects of varying sizes to quantify the transmitting time of acoustic waves in laboratory conditions. Two-dimensional acoustic wave contour maps on the radial section of specimens were then simulated and analyzed based on the experimental data. We tested the relationship between wood grain and acoustic wave velocity as waves passed in various directions through wood. Wood anisotropy has significant effects on both velocity and travel path of acoustic waves, and the velocity of waves passing longitudinally through timbers exceeded the radial velocity. Moreover, cavity defects altered acoustic wave time contours on radial sections of timbers. Acoustic wave transits from an excitation point to the region behind a cavity in defective wood more slowly than in intact wood.

Keywords

acoustic wave / propagation behavior / wood / velocity

References

[1] Armstrong JP, Patterson DW, Sneckenberger JE. Comparison of three equations for predicting stress wave velocity as a function of grain angle. Wood and Fiber Science, 1991, 23(1): 32-43.

[2] Brémaud I. Acoustical properties of wood in string instruments soundboards and tuned idiophones: Biological and cultural diversity. Journal of the Acoustical Society of America, 2012, 131(1): 807-818.

[3] Brashaw BK, Wang XP, Ross RJ, Pellerin RF. Relationship between stress wave velocities of green and dry veneer. Forest Products Journal, 2004, 54(6): 85-89.

[4] Bucur V. Ultrasonic techniques for nondestructive testing of standing trees. Ultrasonics, 2005, 43(4): 237-239.

[5] Divos F, Szalai L. Tree evaluation by acoustic tomography. Proceedings of the 13th International Symposium on Nondestructive Testing of Wood, 2002 251 256

[6] Halabe UB, Bidigalu GM, GangaRao HV, Ross RJ. Nondestructive Evaluation of Green Wood Using Stress Wave and Transverse Vibration Techniques. Materials Evaluation, 1997, 55(9): 1013-1018.

[7] Hernández RE, Cáceres CB. Magnetic resonance microimaging of liquid water distribution in sugar maple wood below fiber saturation point. Wood and Fiber Science, 2010, 42(3): 259-272.

[8] Kabir MF. Prediction of ultrasonic properties from grain angle. Journal of the Institute of Wood Science, 2001, 15(5): 235-246.

[9] Mattheck CG, Bethge KA. Detection of decay in trees with the Metriguard Stress Wave Timer. Journal of Abroriculture, 1993, 19(6): 374-378.

[10] Ross RJ, Ward JC, TenWolde A. Stress wave nondestructive evaluation of wetwood. Forest Products Journal, 1994, 44(7/8): 79-83.

[11] Sandoz JL. Grading of construction timber by ultrasound. Wood Science and Technology, 1989, 23: 95-108.

[12] Wang LH, Xu HD, Zhou CL, Li L, Yang XC. Effect of sensor quantity on measurement accuracy of log inner defects by using stress wave. Journal of Forestry Research, 2007, 18(3): 221-225.

[13] Wang XP. Stress wave-based nondestructive evaluation (NDE) methods for wood quality of standing trees. 1999, Houghton: Michigan Technological University

[14] Yang HS, Kang J, Choi MS. Acoustic effects of green roof systems on a low-profiled structure at street level. Building and Environment, 2012, 50: 44-55.

[15] Yu L, Qi DW. Analysis and processing of decayed log CT image based on multifractal theory. Computers and Electronics in Agriculture, 2008, 63(2): 147-154.

[16] Zhao Y, Zhao N, Fa L, Zhao MS. Seismic signal and data analysis of rock media with vertical anisotropy. Journal of Modern Physics, 2013, 4(1): 11-18.