Elastic Thermoelectric Generators Illustrated in Constantan

Abstract

Functionalities of materials tightly relate to the atomic and electronic structures, the coupling between which through lattice and charge gives birth to thermoelectricity, enabling a direct heat-electricity conversion. Booming wearable electronics nowadays urgently demand thermoelectric film generators as self-powered units using body and environment heats, of which highly recoverable deformability and power are the core challenges. This indicates the great importance of elasticity since a plastic deformation otherwise actuates lattice slips to unsecure both thermoelectricity and recoverability. It is illustrated in this work texturization and dislocations for enhancing elasticity in cold-rolled constantan foils, a metal thermoelectric enabling one of the highest power outputs near room temperature for deformable wearables. The device can work in a purely elastic region, to secure orders of magnitude improvement in recoverable bendability with an extraordinary specific power density, at a bending radius down to 5 mm fitting the curvature of an adult's little finger. This work delivers a strategy for bringing robust deformability to thermoelectricity for powering wearable electronics.

Keywords

dislocation / elasticity / recoverable bendability / texturization / thermoelectric

References

[1] Q. Jin, S. Jiang, Y. Zhao, et al., “Flexible Layer-Structured Bi₂Te₃ Thermoelectric on a Carbon Nanotube Scaffold,” Nature Materials 18 (2019): 62-68.

[2] Y. Pei, X. Shi, A. LaLonde, H. Wang, L. Chen, and G. J. Snyder, “Convergence of Electronic Bands for High Performance Bulk Thermoelectrics,” Nature 473 (2011): 66-69.

[3] G. J. Snyder and E. S. Toberer, “Complex Thermoelectric Materials,” Nature Materials 7 (2008): 105-114.

[4] O. Bubnova, Z. U. Khan, A. Malti, et al., “Optimization of the Thermoelectric Figure of Merit in the Conducting Polymer Poly(3,4-Ethylenedioxythiophene),” Nature Materials 10 (2011): 429-433.

[5] C. Wan, X. Gu, F. Dang, et al., “Flexible N-Type Thermoelectric Materials by Organic Intercalation of Layered Transition Metal Dichalcogenide TiS₂,” Nature Materials 14 (2015): 622-627.

[6] J. Peng and G. J. Snyder, “A Figure of Merit for Flexibility,” Science 366 (2019): 690-691.

[7] W. Liu, Y. Liu, Z. Yang, et al., “Flexible Solar Cells Based on Foldable Silicon Wafers With Blunted Edges,” Nature 617 (2023): 717-723.

[8] Z.-H. Zheng, X. L. Shi, D. W. Ao, et al., “Harvesting Waste Heat With Flexible Bi₂Te₃ Thermoelectric Thin Film,” Nature Sustainability 6 (2022): 180-191.

[9] C. Wan, R. Tian, M. Kondou, R. Yang, P. Zong, and K. Koumoto, “Ultrahigh Thermoelectric Power Factor in Flexible Hybrid Inorganic-Organic Superlattice,” Nature Communications 8 (2017): 1024.

[10] Y. Ding, Y. Qiu, K. Cai, et al., “High Performance N-Type Ag₂Se Film on Nylon Membrane for Flexible Thermoelectric Power Generator,” Nature Communications 10 (2019): 841.

[11] Y. Sun, P. Sheng, C. Di, et al., “Organic Thermoelectric Materials and Devices Based on P- and N-Type Poly(Metal 1,1,2,2-Ethenetetrathiolate)S,” Advanced Materials 24 (2012): 932-937.

[12] Q. Zhang, Z. Zhou, M. Dylla, et al., “Realizing High-Performance Thermoelectric Power Generation Through Grain Boundary Engineering of Skutterudite-Based Nanocomposites,” Nano Energy 41 (2017): 501-510.

[13] Y. Lu, Y. Zhou, W. Wang, et al., “Staggered-Layer-Boosted Flexible Bi₂Te₃ Films With High Thermoelectric Performance,” Nature Nanotechnology 18 (2023): 1281-1288.

[14] Y. Lei, R. Qi, M. Chen, et al., “Microstructurally Tailored Thin Beta-Ag₂Se Films Towards Commercial Flexible Thermoelectrics,” Advanced Materials 34 (2021): e2104786.

[15] T. Varghese, C. Dun, N. Kempf, et al., “Flexible Thermoelectric Devices of Ultrahigh Power Factor by Scalable Printing and Interface Engineering,” Advanced Functional Materials 30 (2019): 1905796.

[16] Y. Liu, Q. Zhang, A. Huang, et al., “Fully Inkjet-Printed Ag₂Se Flexible Thermoelectric Devices for Sustainable Power Generation,” Nature Communications 15 (2024): 2141.

[17] Q. Yang, S. Yang, P. Qiu, et al., “Flexible Thermoelectrics Based on Ductile Semiconductors,” Science 377 (2022): 854-858.

[18] J. Liang, T. Wang, P. Qiu, et al., “Flexible Thermoelectrics: From Silver Chalcogenides to Full-Inorganic Devices,” Energy & Environmental Science 12 (2019): 2983-2990.

[19] Y. Lu, Y. Qiu, K. Cai, et al., “Ultrahigh Power Factor and Flexible Silver Selenide-Based Composite Film for Thermoelectric Devices,” Energy & Environmental Science 13 (2020): 1240-1249.

[20] R. Valiev, “Nanostructuring of Metals by Severe Plastic Deformation for Advanced Properties,” Nature Materials 3 (2004): 511-516.

[21] J. Ren, Y. Zhang, D. Zhao, et al., “Strong Yet Ductile Nanolamellar High-Entropy Alloys by Additive Manufacturing,” Nature 608 (2022): 62-68.

[22] J. Mao, Y. Wang, H. S. Kim, et al., “High Thermoelectric Power Factor in Cu-Ni Alloy Originate From Potential Barrier Scattering of Twin Boundaries,” Nano Energy 17 (2015): 279-289.

[23] S. I. Ranganathan and M. Ostoja-Starzewski, “Universal Elastic Anisotropy Index,” Physical Review Letters 101 (2008): 055504.

[24] V. I. Razumovskiy, A. V. Ruban, and P. A. Korzhavyi, “Effect of Temperature on the Elastic Anisotropy of Pure Fe and Fe_0.9Cr_0.1 Random Alloy,” Physical Review Letters 107 (2011): 205504.

[25] C. Lee, G. Kim, Y. Chou, et al., “Temperature Dependence of Elastic and Plastic Deformation Behavior of a Refractory High-Entropy Alloy,” Science Advances 6 (2020): eaaz4748.

[26] J. F. Nye, Physical Properties of Crystals (Oxford University Press, 1985).

[27] D. Roylance, Mechanics of Materials (Massachusetts Institute of Technology, 2022).

[28] R. Li, H. Wang, B. He, et al., “Effect of α Texture on the Anisotropy of Yield Strength in Ti-6Al-2Zr-1Mo-1V Alloy Fabricated by Laser Directed Energy Deposition Technique,” Materials Science and Engineering: A 824 (2021): 141771.

[29] F. Otto, A. Dlouhý, C. Somsen, H. Bei, G. Eggeler, and E. P. George, “The Influences of Temperature and Microstructure on the Tensile Properties of a CoCrFeMnNi High-Entropy Alloy,” Acta Materialia 61 (2013): 5743-5755.

[30] F. K. Lotgering, “Topotactical Reactions With Ferrimagnetic Oxides Having Hexagonal Crystal Structures—I,” Journal of Inorganic and Nuclear Chemistry 9 (1959): 113-123.

[31] F. K. Lotgering, “Topotactical Reactions With Ferrimagnetic Oxides Having Hexagonal Crystal Structures—II,” Journal of Inorganic and Nuclear Chemistry 16 (1960): 100-108.

[32] H. Tian, H. Suo, Y. Ji, et al., “Systematic Investigation of the Texture Evolution of Cu-Ni Alloys With Different Strains,” Journal of Alloys and Compounds 899 (2022): 163160.

[33] M. Wu, J. Li, Y. Liu, et al., “High Thermoelectric Performance and Ultrahigh Flexibility Ag(2)S(1-x)Se(x) Film on a Nylon Membrane,” ACS Applied Materials & Interfaces 15 (2023): 8415-8423.

[34] Y. Lu, Y. Qiu, K. Cai, et al., “Ultrahigh Performance PEDOT/Ag₂Se/CuAgSe Composite Film for Wearable Thermoelectric Power Generators,” Materials Today Physics 14 (2020): 100223.

[35] Y. Lu, Y. Ding, Y. Qiu, et al., “Good Performance and Flexible PEDOT:PSS/Cu₂Se Nanowire Thermoelectric Composite Films,” ACS Applied Materials & Interfaces 11 (2019): 12819-12829.

[36] H. Shang, T. Li, D. Luo, et al., “High-Performance Ag-Modified Bi_0.5Sb_1.5Te₃ Films for the Flexible Thermoelectric Generator,” ACS Applied Materials & Interfaces 12 (2020): 7358-7365.

[37] L. Wang, Z. Zhang, Y. Liu, et al., “Exceptional Thermoelectric Properties of Flexible Organic-Inorganic Hybrids With Monodispersed and Periodic Nanophase,” Nature Communications 9 (2018): 3817.

[38] C. Jiang, P. Wei, Y. Ding, et al., “Ultrahigh Performance polyvinylpyrrolidone/Ag₂Se Composite Thermoelectric Film for Flexible Energy Harvesting,” Nano Energy 80 (2021): 105488.

[39] Q. Gao, W. Wang, Y. Lu, et al., “High Power Factor Ag/Ag₂Se Composite Films for Flexible Thermoelectric Generators,” ACS Applied Materials & Interfaces 13 (2021): 14327-14333.

[40] J. Gao, L. Miao, C. Liu, et al., “A Novel Glass-Fiber-Aided Cold-Press Method for Fabrication of N-Type Ag₂Te Nanowires Thermoelectric Film on Flexible Copy-Paper Substrate,” Journal of Materials Chemistry A 5 (2017): 24740-24748.

[41] J. Gao, L. Miao, H. Lai, et al., “Thermoelectric Flexible Silver Selenide Films: Compositional and Length Optimization,” iScience 23 (2020): 100753.

[42] S. Hou, Y. Liu, L. Yin, et al., “High Performance Wearable Thermoelectric Generators Using Ag₂Se Films With Large Carrier Mobility,” Nano Energy 87 (2021): 106223.

[43] B. Wu, Y. Guo, C. Hou, Q. Zhang, Y. Li, and H. Wang, “High-Performance Flexible Thermoelectric Devices Based on All-Inorganic Hybrid Films for Harvesting Low-Grade Heat,” Advanced Functional Materials 29 (2019): 1900304.

[44] C. Jiang, Y. Ding, K. Cai, et al., “Ultrahigh Performance of n-Type Ag₂Se Films for Flexible Thermoelectric Power Generators,” ACS Applied Materials & Interfaces 12 (2020): 9646-9655.

[45] B. Zhu, X. Liu, Q. Wang, et al., “Realizing Record High Performance in n-Type Bi₂Te₃-Based Thermoelectric Materials,” Energy & Environmental Science 13 (2020): 2106-2114.

[46] Y. Xiao, Y. Wu, P. Nan, et al., “Cu Interstitials Enable Carriers and Dislocations for Thermoelectric Enhancements in n-PbTe_0.75Se_0.25,” Chem 6 (2020): 523-537.

[47] X. Shi, T. Zhao, X. Zhang, et al., “Extraordinary n-Type Mg₃SbBi Thermoelectrics Enabled by Yttrium Doping,” Advanced Materials 31 (2019): 1903387.

[48] K. Cheng, Z. Bu, J. Tang, et al., “Efficient Mg₂Si_0.3Sn_0.7 Thermoelectrics Demonstrated for Recovering Heat of about 600 K,” Materials Today Physics 28 (2022): 100887.

[49] D. Qin, H. Wu, S. Cai, et al., “Enhanced Thermoelectric and Mechanical Properties in Yb_0.3Co₄Sb₁₂ With In Situ Formed CoSi Nanoprecipitates,” Advanced Energy Materials 9 (2019): 1902435.

RIGHTS & PERMISSIONS

2025 The Author(s). Interdisciplinary Materials published by Wuhan University of Technology and John Wiley & Sons Australia, Ltd.