Laser-processed lithium niobate wafer for pyroelectric sensor

Abstract

During the past few decades, pyroelectric sensors have attracted extensive attention due to their prominent features. However, their effectiveness is hindered by low electric output. In this study, the laser processed lithium niobate (LPLN) wafers are fabricated to improve the temperature–voltage response. These processed wafers are utilized to construct pyroelectric sensors as well as human–machine interfaces. The laser induces escape of oxygen and the formation of oxygen vacancies, which enhance the charge transport capability on the surface of lithium niobate (LN). Therefore, the electrodes gather an increased quantity of charges, increasing the pyroelectric voltage on the LPLN wafers to a 1.3 times higher voltage than that of LN wafers. For the human–machine interfaces, tactile information in various modes can be recognized by a sensor array and the temperature warning system operates well. Therefore, the laser modification approach is promising to enhance the performance of pyroelectric devices for applications in human–machine interfaces.

Keywords

human–machine interfaces / laser-induced defects / lithium niobate / pyroelectric sensors / surface modification

References

[1] Chen K, Pan J, Yin W, Ma C, Wang L. Flexible electronics based on one-dimensional inorganic semiconductor nanowires and two-dimensional transition metal dichalcogenides. Chinese Chem Lett. 2023; 34(11): 108226.

[2] Zhang D, Wu H, Bowen CR, Yang Y. Recent advances in pyroelectric materials and applications. Small. 2021; 17(51): e2103960.

[3] Mondal R, Hasan MAM, Baik JM, Yang Y. Advanced pyroelectric materials for energy harvesting and sensing applications. Mater Today. 2023; 66: 273-301.

[4] Li W, Tang G, Zhang G, et al. Improper molecular ferroelectrics with simultaneous ultrahigh pyroelectricity and figures of merit. Sci Adv. 2021; 7(5): eabe3068.

[5] Jiang J, Zhang L, Ming C, et al. Giant pyroelectricity in nanomembranes. Nature. 2022; 607(7919): 480-485.

[6] Zhu R, Zhao J, Chen J, et al. A two-step annealing method to enhance the pyroelectric properties of Mn:PIMNT chips for infrared detectors. Materials. 2020; 13(11): 2562.

[7] Song K, Zhao R, Wang ZL, Yang Y. Conjuncted pyro-piezoelectric effect for self-powered simultaneous temperature and pressure sensing. Adv Mater. 2019; 31(36): 1902831.

[8] Li L, Zhao X, Li X, et al. Scale effects of low-dimensional relaxor ferroelectric single crystals and their application in novel pyroelectric infrared detectors. Adv Mater. 2014; 26(16): 2580-2585.

[9] Lang SB. Pyroelectricity: from ancient curiosity to modern imaging tool. Phys Today. 2005; 58(8): 31-36.

[10] Lee MH, Guo R, Bhalla AS. Pyroelectric sensors. J Electroceram. 1998; 2(4): 229-242.

[11] Liow CH, Lu X, Zeng K, Li S, Ho GW. Optically governed dynamic surface charge redistribution of hybrid Plasmo-pyroelectric nanosystems. Small. 2019; 15(36): 1903042.

[12] Wu Y, Ruan M, Guo Z, Wang C, Liu Z. Optimization of the IO₃ polar group of BiOIO₃ by bulk phase doping amplifies pyroelectric polarization to enhance carrier separation and improve the pyro-photo-electric catalytic performance. Appl Catal B Environ. 2023; 339: 123169.

[13] Wang L, Zhang F, Chen C, et al. Bandgap engineering of BZT-BCT by Mn doping and the emerging strong photo-pyroelectric effect. Nano Energy. 2024; 119: 109081.

[14] Shen M, Liu K, Zhang G, et al. Thermoelectric coupling effect in BNT-BZT-xGaN pyroelectric ceramics for low-grade temperature-driven energy harvesting. Nat Commun. 2023; 14(1): 7907.

[15] Cao Z, Wei C, Cheng X, et al. Ground fused silica processed by combined chemical etching and CO₂ laser polishing with super-smooth surface and high damage resistance. Opt Lett. 2020; 45(21): 6014-6017.

[16] Kedia M, Rai M, Phirke H, et al. Light makes right: laser polishing for surface modification of perovskite solar cells. ACS Energy Lett. 2023; 8(6): 2603-2610.

[17] Xie J, Qiao M, Zhu D, et al. Laser induced coffee-ring structure through solid-liquid transition for color printing. Small. 2023; 19(6): e2205696.

[18] Wang J, Yu Q, Liu S, et al. Laser-induced carbonization of hydroxyapatite sandwich paper for inkless printing. Acta Phys-Chim Sin. 2023; 40(4): 2304024.

[19] Li G, Leng M, Wang S, et al. Printable structural colors and their emerging applications. Mater Today. 2023; 69: 133-159.

[20] Wang L, Tian Z, Jiang G, et al. Spontaneous dewetting transitions of droplets during icing & melting cycle. Nat Commun. 2022; 13(1): 378.

[21] Huang J, Fu X, Liu G, et al. Micro/nano-structures-enhanced triboelectric nanogenerators by femtosecond laser direct writing. Nano Energy. 2019; 62: 638-644.

[22] Wu T, Chang B, Li Y, et al. Laser-induced plasma and local temperature field for high-efficiency ammonia synthesis. Nano Energy. 2023; 116: 108855.

[23] Chen Y, Wang Y, Yu J, et al. Underfocus laser induced Ni nanoparticles embedded metallic MoN microrods as patterned electrode for efficient overall water splitting. Adv Sci. 2022; 9(10): e2105869.

[24] Geng J, Xu L, Yan W, Shi L, Qiu M. High-speed laser writing of structural colors for full-color inkless printing. Nat Commun. 2023; 14(1): 565.

[25] Zhou K, Zhou W, Yang L, et al. Ultrahigh-performance pseudocapacitor electrodes based on transition metal phosphide nanosheets array via phosphorization: a general and effective approach. Adv Funct Mater. 2015; 25(48): 7530-7538.

[26] Harilal SS, Phillips MC, Froula DH, Anoop KK, Issac RC, Beg FN. Optical diagnostics of laser-produced plasmas. Rev Mod Phys. 2022; 94(3): 035002.

[27] Bell KL, Berrington KA. Photoionization of the ⁴S^o ground state of atomic nitrogen and atomic nitrogen ⁴S^o-4P oscillator strengths. J Phys B: At Mol Opt. 1991; 24(5): 933-941.

[28] Yan Y, Taylor KT, Seaton MJ. Atomic data for opacity calculations. III. Oscillator strengths for C II. J Phys: At Mol Opt. 1987; 20(23): 6399-6408.

[29] Herzberg G, Moore HR. The spectrum of Li+. Can J Phys. 1959; 37(11): 1293-1313.

[30] Berry HG, Pinnington EH, Subtil JL. Energies and mean lives of doubly excited terms in lithium. J Opt Soc Am. 1972; 62(6): 767-771.

[31] Tauheed A, Reader J. Spectrum and energy levels of triply-ionized niobium (Nb IV). Phys Scripta. 2005; 72(2–3): 158-180.

[32] Bromander J, Buchta R. Mean lives of n=3 terms in Li II. Phys Scripta. 1970; 1(4): 184-185.

[33] Bahl MK. ESCA studies of some niobium compounds. J Phys Chem Solid. 1975; 36(6): 485-491.

[34] Sweeney KL, Halliburton LE. Oxygen vacancies in lithium niobate. Appl Phys Lett. 1983; 43(4): 336-338.

RIGHTS & PERMISSIONS

2024 The Author(s). InfoMat published by UESTC and John Wiley & Sons Australia, Ltd.