Polycarboxylate superplasticizer instead of ultrasonic treatment for dispersing cellulose nanofibers to strengthen cemented rockfill

Jiangyu Wu , Wenyu Zhang , Shuo Yang , Andrey P. Jivkov , Elsabe Kearsley , Hai Pu , Qian Yin , Dan Ma , Hao Zhang , Hong S. Wong

International Journal of Minerals, Metallurgy, and Materials ›› 2025, Vol. 32 ›› Issue (12) : 2855 -2865.

PDF
International Journal of Minerals, Metallurgy, and Materials ›› 2025, Vol. 32 ›› Issue (12) :2855 -2865. DOI: 10.1007/s12613-025-3246-z
Research Article
research-article
Polycarboxylate superplasticizer instead of ultrasonic treatment for dispersing cellulose nanofibers to strengthen cemented rockfill
Author information +
History +
PDF

Abstract

To address the dual challenges of resource utilization of mining solid waste (e.g., coal gangue) and performance enhancement of cemented rockfill, this study systematically investigates the mechanisms of ultrasonic dispersion time and polycarboxylate superplasticizer (PCE) on the properties of cellulose nanofiber (CNF)-modified cemented rockfill. A series of comparative experiments were designed with varying ultrasonic dispersion times (0–60 min) and PCE dosages (0.1wt%–0.4wt%). Through mechanical testing, hydration product analysis, and microstructural characterization, the study revealed the advantages of PCE in promoting CNF dispersion to enhance the engineering applicability of cemented rockfill. The results demonstrate that: (1) Ultrasonic dispersion for 30 min increases the compressive strength by 37.7% compared to the untreated group; however, excessive ultrasonication (60 min) induces hydrolysis of CNF, releasing reducing sugars that retard hydration. (2) PCE facilitates CNF dispersion, achieving a 29.1% increase in compressive strength at a dosage of 0.4wt%, while simultaneously improving hydration products and microstructural development. (3) While ultrasonic dispersion yields slightly higher strength improvements, PCE demonstrates superior cost-effectiveness and operational convenience, rendering it more viable for industrial adoption. This study provides a theoretical foundation for the nano-enhanced modification of cemented rockfill, offering new insights into the recycling of solid waste and the development of high-performance materials.

Keywords

cemented rockfill / cellulose nanofiber / polycarboxylate superplasticizer / ultrasonic dispersion / mechanical properties / microstructure

Cite this article

Download citation ▾
Jiangyu Wu, Wenyu Zhang, Shuo Yang, Andrey P. Jivkov, Elsabe Kearsley, Hai Pu, Qian Yin, Dan Ma, Hao Zhang, Hong S. Wong. Polycarboxylate superplasticizer instead of ultrasonic treatment for dispersing cellulose nanofibers to strengthen cemented rockfill. International Journal of Minerals, Metallurgy, and Materials, 2025, 32(12): 2855-2865 DOI:10.1007/s12613-025-3246-z

登录浏览全文

4963

注册一个新账户 忘记密码

References

[1]

J.M. Gao and L. Zhang, Environmental regulation, market power and low-carbon development of China’s coal power industry chain: Based on both strategy and return perspectives, Energy Strategy Rev., 58(2025), art. No. 101651

[2]

Y.Q. Guo, X.Y. Mao, J.N. Wei, M.Y. Liu, Y.Q. Chen, and J. Zhou, Changes in the distance of interprovincial coal transportation in China and its effect on carbon emissions, J. Transp. Geogr., 123(2025), art. No. 104139.

[3]

Song ML, Wang JL, Zhao JJ. Coal endowment, resource curse, and high coal-consuming industries location: Analysis based on large-scale data. Resour. Conserv. Recycl.. 2018, 129: 333

[4]

J.Y. Li and J.M. Wang, Comprehensive utilization and environmental risks of coal gangue: A review, J. Cleaner Prod., 239(2019), art. No. 117946.

[5]

X. Yu, K. Yang, X. He, Y.Q. Hou, J.J. Fang, and S.X. He, Research progress on multi-source coal-based solid waste (MCSW) resource utilization and backfill mining basic theory: A systematic literature review, Process Saf. Environ. Prot., 195(2025), art. No. 106670.

[6]

J.Y. Zhao, C.Y. Cao, X. Chen, et al., Source-specific ecological risk analysis and critical source identification of heavy metal(loid)s in the soil of typical abandoned coal mining area, Sci. Total Environ., 947(2024), art. No. 174506.

[7]

M. Yadav, N. George, and V. Dwibedi, Emergence of toxic trace elements in plant environment: Insights into potential of silica nanoparticles for mitigation of metal toxicity in plants, Environ. Pollut., 333(2023), art. No. 122112.

[8]

Liu Y, Qi XY, Luo DY, Zhang YQ, Qin JT. Detection of spontaneous combustion areas of coal gangue dumps and comprehensive governance technologies: A case study. ACS Omega. 2023, 8(50): 47690

[9]

Jiang X, Lu WX, Zhao HQ, Yang QC, Yang ZP. Potential ecological risk assessment and prediction of soil heavy-metal pollution around coal gangue dump. Nat. Hazards Earth Syst. Sci.. 2014, 14(6): 1599

[10]

M.W. Liu, X.R. Liu, Z.W. Shi, et al., Enhancement of the utilization of coal gangue as mineral fertilizers by the thermophilic bacterium Bacillus aerius, J. Environ. Chem. Eng., 13(2025), No. 2, art. No. 115850.

[11]

H.L. Zhang, Q. Li, M.F. Zhao, et al., Leaching law of heavy metals in coal gangue: A combination of experimental optimization and simulation, J. Hazard. Mater., 484(2025), art. No. 136790.

[12]

Wu AX, Wang Y, Ruan ZE, Xiao BL, Wang JD, Wang LQ. Key theory and technology of cemented paste backfill for green mining of metal mines. Green Smart Min. Eng.. 2024, 1(1): 27

[13]

Wu AX, Wang ZQ, Ruan ZE, Bürger R, Wang SY, Mo Y. Rheological properties and concentration evolution of thickened tailings under the coupling effect of compression and shear. Int. J. Miner. Metall. Mater.. 2024, 31(5): 862

[14]

T. Kasap, E. Yilmaz, and M. Sari, Physico-chemical and micro-structural behavior of cemented mine backfill: Effect of pH in dam tailings, J. Environ. Manage., 314(2022), art. No. 115034.

[15]

Zhao Y, Taheri A, Karakus M, Chen ZW, Deng A. Effects of water content, water type and temperature on the rheological behaviour of slag-cement and fly ash-cement paste backfill. Int. J. Min. Sci. Technol.. 2020, 30(3): 271

[16]

Sivakugan N, Rankine RM, Rankine KJ, Rankine KS. Geotechnical considerations in mine backfilling in Australia. J. Cleaner Prod.. 2006, 14(12–13): 1168

[17]

J.Y. Wu, H.S. Wong, H. Zhang, Q. Yin, H.W. Jing, and D. Ma, Improvement of cemented rockfill by premixing low-alkalinity activator and fly ash for recycling gangue and partially replacing cement, Cem. Concr. Compos., 145(2024), art. No. 105345.

[18]

Tariq A, Yanful EK. A review of binders used in cemented paste tailings for underground and surface disposal practices. J. Environ. Manage.. 2013, 131: 138

[19]

Zhang Q, Liu B, Xiao K, Ekberg C, Zhang SG. Preparation and hydration of industrial solid waste–cement blends: A review. Int. J. Miner. Metall. Mater.. 2022, 29(12): 2106

[20]

X.S. Li, D.L. Wang, Q.S. Chen, and C.C. Qi, Alkali activation of blast furnace slag using Bayer red mud as an alternative activator to prepare cemented paste backfill, Constr. Build. Mater., 453(2024), art. No. 139061.

[21]

N. Ouffa, R. Trauchessec, M. Benzaazoua, A. Lecomte, and T. Belem, A methodological approach applied to elaborate alkali-activated binders for mine paste backfills, Cem. Concr. Compos., 127(2022), art. No. 104381.

[22]

Yin Q, Wen F, Tao ZG, et al. . Effects of aggregate size distribution and carbon nanotubes on the mechanical properties of cemented gangue backfill samples under true triaxial compression. Int. J. Miner. Metall. Mater.. 2025, 32(2): 311

[23]

Cao SG, Che CY, Zhang Y, et al. . Mechanical properties and damage evolution characteristics of waste tire steel fiber-modified cemented paste backfill. Int. J. Min. Sci. Technol.. 2024, 34(7): 909

[24]

J.Y. Wu, H.W. Jing, Y. Gao, Q.B. Meng, Q. Yin, and Y. Du, Effects of carbon nanotube dosage and aggregate size distribution on mechanical property and microstructure of cemented rockfill, Cem. Concr. Compos., 127(2022), art. No. 104408.

[25]

J.Y. Wu, H.S. Wong, Q. Yin, and D. Ma, Effects of aggregate strength and mass fraction on mesoscopic fracture characteristics of cemented rockfill from gangue as recycled aggregate, Compos. Struct., 311(2023), art. No. 116851.

[26]

Wu JY, Yin Q, Gao Y, Meng B, Jing HW. Particle size distribution of aggregates effects on mesoscopic structural evolution of cemented waste rock backfill. Environ. Sci. Pollut. Res. Int.. 2021, 28(13): 16589

[27]

B. Zhang, D.P. Chen, B. Han, Y.F. Hu, and K.Q. Li, The exploration of effect for nano-Al2O3 on solid waste based superfine tailings cemented paste backfill: Pyrolysis property, hydration mechanism and environmental risk, Constr. Build. Mater., 452(2024), art. No. 139035.

[28]

Y.F. Hu, L.J. Zheng, B. Zhang, K.Q. Li, and B. Han, Key attributes of superfine tailings cemented paste backfill modified with nano-Al2O3: Mechanical properties, flowability, microstructure, and thermal decomposition characteristics, Constr. Build. Mater., 458(2025), art. No. 139511.

[29]

W.Y. Qu, K.L. Liu, L. Wang, H.Y. Zeng, and Q.Y. Hu, Influence and analysis of different admixtures on the performance of nano-SiO2 aerogel foamed cement, Constr. Build. Mater., 459(2025), art. No. 139701.

[30]

S. Feng, H.G. Xiao, and S. Guan, Influence of nano-SiO2 and nano-TiO2 on properties and microstructure of cement-based materials, Constr. Build. Mater., 459(2025), art. No. 139805.

[31]

H. Chen, Z.X. Song, B.B. Liu, et al., Improving the carbonation resistance of supersulfated cement by nano SiO2 and silica fume, Cem. Concr. Compos., 158(2025), art. No. 105984.

[32]

G.S. Han, S.Z. Dai, J.Q. Zhang, Y. Gao, and Y.M. Liu, Study on the workability and early mechanical properties of carbon nanotube-coated fly ash modified cement-based grouting materials, Constr. Build. Mater., 439(1014), art. No. 137317.

[33]

Y. Gao, Z. Cheng, J.J. Yu, X.N. Guo, Y.M. Liu, and W.Q. Chen, Mechanical performance enhancement of UHPC via ITZ improvement using graphene oxide-coated steel fibers, Cem. Concr. Compos., 157(1015), art. No. 105931.

[34]

Ghazizadeh S, Duffour P, Skipper NT, Bai Y. Understanding the behaviour of graphene oxide in Portland cement paste. Cem. Concr. Res.. 2018, 111: 169

[35]

Eichhorn SJ, Dufresne A, Aranguren M, et al. . Review: Current international research into cellulose nanofibres and nanocomposites. J. Mater. Sci.. 2010, 45: 1

[36]

J.P. Peng, R.W. Fu, Y.H. Huang, et al., Influence and mechanism of NaOH concentration on the dissolution of cellulose and extraction of CNF in alkaline solvents at 15°C, Carbohydr. Polym., 353(1015), art. No. 113165.

[37]

U. Kilic, N. Soliman, A. Omran, and O.E. Ozbulut, Effects of cellulose nanofibrils on rheological and mechanical properties of 3D printable cement composites, Cem. Concr. Compos., 152(2024), art. No. 105617.

[38]

J.Y. Wu, S. Yang, M. Williamson, et al., Microscopic mechanism of cellulose nanofibers modified cemented gangue backfill materials, Adv. Compos. Hybrid Mater., 8(1015), No. 1, art. No. 177.

[39]

J.Y. Wu, S. Yang, H.S. Wong, et al., Reinforcement mechanisms of cellulose nanofibers on cemented rockfill: Macroscopic, microscopic and molecular insights, Constr. Build. Mater., 466(2025), art. No. 140191.

[40]

E. Sarıoğlu, İ. Tarhanlı, T. Yarıcı, B. Bengü, C. Erkey, and E. Senses, Unraveling the effects of cellulose nanoparticle types on dispersion, rheological behavior, and shear strength in adhesive formulations, Carbohydr. Polym., 353(1015), art. No. 123261.

[41]

M. Fujishita, C. Luo, K. Aoki, and Y. Uetsuji, Fiber dispersion control and its advantages on nonlinear mechanical properties in cellulose composites, Composites, Part A, 190(1015), art. No. 108639.

[42]

P.B. Nagy, M. Szabados, D. Sebők, et al., Insight into the structural changes upon ultrasonic fragmentation and dispersion of carbon nanomaterials of different dimensions and bulk moduli, Carbon, 244(2025), art. No. 120616.

[43]

M. Sandhya, D. Ramasamy, K. Sudhakar, K. Kadirgama, and W.S.W. Harun, Ultrasonication an intensifying tool for preparation of stable nanofluids and study the time influence on distinct properties of graphene nanofluids—A systematic overview, Ultrason. Sonochem., 73(2021), art. No. 105479.

[44]

Retamal Marín RR, Babick F, Stintz M. Ultrasonic dispersion of nanostructured materials with probe sonication–practical aspects of sample preparation. Powder Technol.. 2017, 318: 451

[45]

Kawashima S, Seo JT, Corr D, Hersam MC, Shah SP. Dispersion of CaCO3 nanoparticles by sonication and surfactant treatment for application in fly ash–cement systems. Mater. Struct.. 2014, 47(6): 1011

[46]

Y. Gao, H.W. Jing, Z.L. Zhao, X.S. Shi, and L. Li, Influence of ultrasonication energy on reinforcing-roles of CNTs to strengthen ITZ and corresponding anti-permeability properties of concrete, Constr. Build. Mater., 303(2021), art. No. 124451.

[47]

Tsardaka EC, Stefanidou M. Application of an alternative way for silica fume dispersion in cement pastes without ultrasonication. Cem. Concr. Res.. 2019, 115: 59

[48]

I. Cavusoglu, Superplasticizer dosage effect on strength, microstructure and permeability enhancement of cementitious paste fills, Minerals, 14(2024), No. 12, art. No. 1242.

[49]

J. Zhang, H.W. Deng, A. Taheri, J.R. Deng, and B. Ke, Effects of superplasticizer on the hydration, consistency, and strength development of cemented paste backfill, Minerals, 8(2018), No. 9, art. No. 381.

[50]

I. Cavusoglu, E. Yilmaz, and A.O. Yilmaz, Additivity effect on properties of cemented coal fly ash backfill containing water-reducing admixtures, Constr. Build. Mater., 267(2021), art. No. 121021.

[51]

Ouattara D, Yahia A, Mbonimpa M, Belem T. Effects of superplasticizer on rheological properties of cemented paste backfills. Int. J. Miner. Process.. 2017, 161: 28

[52]

Mangane MBC, Argane R, Trauchessec R, Lecomte A, Benzaazoua M. Influence of superplasticizers on mechanical properties and workability of cemented paste backfill. Miner. Eng.. 2018, 116: 3

[53]

Cavusoglu I, Fall M. Engineering properties of cemented paste backfill with full-range water-reducing admixture. Int. J. Civ. Eng.. 2023, 21(10): 1567

[54]

Zhang YY, Chang J, Ji J. AH3 phase in the hydration product system of AFt–AFm–AH3 in calcium sulfoaluminate cements: A microstructural study. Constr. Build. Mater.. 2018, 167: 587

[55]

Tajuelo Rodriguez E, Garbev K, Merz D, Black L, Richardson IG. Thermal stability of C–S–H phases and applicability of Richardson and Groves’ and Richardson C–(A)–S–H(I) models to synthetic C–S–H. Cem. Concr. Res.. 2017, 93: 45

[56]

Wu JY, Zhang WY, Wang YM, et al. . Effect of composite alkali activator proportion on macroscopic and microscopic properties of gangue cemented rockfill: Experiments and molecular dynamic modelling. Int. J. Miner. Metall. Mater.. 2025, 32(8): 1813

[57]

Kim KH, Eom IY, Lee SM, Cho ST, Choi IG, Choi JW. Applicability of sub- and supercritical water hydrolysis of woody biomass to produce monomeric sugars for cellulosic bioethanol fermentation. J. Ind. Eng. Chem.. 2010, 16(6): 918

[58]

Á. De La Rosa, G. Ruiz, N. Husillos-Rodríguez, and R. Moreno, Effect of cellulose nanofibers on the rheological and mechanical properties of cement pastes with metakaolin and natural volcanic pozzolan, Constr. Build. Mater., 452(2024), art. No. 138823.

[59]

Liu C, Pollard DD, Deng S, Aydin A. Mechanism of formation of wiggly compaction bands in porous sandstone: 1. Observations and conceptual model. J. Geophys. Res.: Solid Earth. 2015, 120(12): 8138

RIGHTS & PERMISSIONS

University of Science and Technology Beijing

PDF

0

Accesses

0

Citation

Detail

Sections
Recommended

/