Site-Specific Zonation of Seismic Site Effects by Optimization of the Expert GIS-Based Geotechnical Information System for Western Coastal Urban Areas in South Korea

Abstract

Earthquake-induced disasters are often more severe over soft soils than over firm soils or rocks owing to the seismic site effects related to the amplification of ground motion. On a regional scale, such differences can be estimated by spatially predicting the subsurface soil thickness over the entire target area. Generally, soil deposits are deeper in coastal or riverside areas than in inland regions. In this study, the seismic site effects in the coastal metropolitan areas of Incheon and Bucheon, South Korea, were assessed to provide information on seismic hazards. Spatial prediction of geotechnical layers was performed for the entire study area within an advanced GIS framework. Approximately 7500 existing borehole records in the Incheon and Bucheon areas were gathered and archived into a GIS database. Surface geotechnical data were acquired from a walk-over survey. Based on the optimized geo-data, spatial zoning maps of site-specific seismic response parameters, based on multiscale geospatial modeling, were created and presented for use in a regional seismic mitigation strategy. Seismic zonation was also performed to determine site coefficients for seismic design over the entire target area and to compare them with each other. We verified that the geotechnical data based spatial zonation would be useful for seismic hazard mitigation.

Keywords

Coastal urban areas / Geo-data / Geostatistical spatial zonation / Seismic site effects / Site classification / South Korea

References

[1] Anselin L, Syabri I, Kho Y. GeoDa: An introduction to spatial data analysis. Geographical Analysis, 2006, 38(1): 5-22

[2] Borruso G. Gervasi O, Gavrilova ML, Kumar V, Laganà A, Lee HP, Mun Y, Taniar D, Tan CJK. Network density estimation: Analysis of point patterns over a network. Computational science and its applications- ICCSA 2005, 2005, Berlin: Springer 126-132

[3] Borruso G. Network density estimation: A GIS approach for analysing point patterns in a network space. Transactions in GIS, 2008, 12(3): 377-402

[4] Borruso, G., and G. Schoier. 2004. Density analysis on large geographical databases. Search for an index of centrality of services at urban scale. In Computational science and its applications-ICCSA 2004, ed. A. Laganà, M.L. Gavrilova, V. Kumar, Y. Mun, C.J.K. Tan, and O. Gervasi, 1009–1015. Berlin: Springer.

[5] Chandler AM, Pappin JW, Coburn AW. Vulnerability and seismic risk assessment of buildings following the 1989 Newcastle, Australia earthquake. Bulletin of the New Zealand National Society for Earthquake Engineering, 1991, 24(2): 116-138.

[6] Chun SH, Sun CK, Chung CK. Application of geostatistical method for geo-layer information. Journal of the Korean Society of Civil Engineers, 2005, 25(2C): 103-115 (in Korean)

[7] Dobry R, Borcherdt RD, Crouse CB, Idriss IM, Joyner WB, Martin GR, Power MS, Rinne EE New site coefficients and site classification system used in recent building seismic code provisions. Earthquake Spectra, 2000, 16(1): 41-67

[8] Ge Y, Gu Y, Deng W. Evaluating China’s national post-disaster plans: The 2008 Wenchuan earthquake’s recovery and reconstruction planning. International Journal of Disaster Risk Science, 2010, 1(2): 17-27.

[9] Green RA, Olson SM, Cox BR, Rix GJ, Rathje E, Bachhuber J, French J, Lasley S Geotechnical aspects of failures at Port-au-Prince seaport during the 12 January 2010 Haiti earthquake. Earthquake Spectra, 2011, 27(S1): S43-S65

[10] Hashemi M, Alesheikh AA. A GIS-based earthquake damage assessment and settlement methodology. Soil Dynamics and Earthquake Engineering, 2011, 31(11): 1607-1617

[11] Hoult RD, Lumantarna E, Goldsworthy HM. Soil amplification in low-to-moderate seismic regions. Bulletin of Earthquake Engineering, 2017, 15(5): 1945-1963

[12] ICBO (International Conference of Building Officials). 1997. 1997 uniform building code, volume 2: Structural engineering design provisions. Washington, DC: International Conference of Building Officials.

[13] ICC (International Code Council) 2000 international building code, 2000, Washington, DC: ICC

[14] ICC (International Code Council) 2006 international building code, 2006, Washington, DC: ICC

[15] Isaaks EH, Srivastava RM. An introduction to applied geostatistics, 1989, New York: Oxford University Press

[16] Jones, T.D., M.J. Neville, G. Scott, and C. Sinadinovski. 1996. Earthquake microzonation and the development of the Australian earthquake loading standard. Paper presented at the 1996 Australian Earthquake Engineering Society Conference, Adelaide.

[17] Kim DS, Chung CK, Sun CG, Bang ES. Site assessment and evaluation of spatial earthquake ground motion of Kyeongju. Soil Dynamics and Earthquake Engineering, 2002, 22(5): 371-387

[18] Kim HS, Chung CK, Kim HK. Geo-spatial data integration for subsurface stratification of dam site with outlier analyses. Environmental Earth Sciences, 2016, 75(2): 1-10.

[19] Kim HS, Chung CK, Kim JJ. Three-dimensional geostatistical integration of borehole and geophysical datasets in developing geological unit boundaries for geotechnical investigations. Quarterly Journal of Engineering Geology and Hydrogeology, 2017, 51(1): 79-95

[20] Kim HS, Sun CG, Cho HI. Geospatial assessment of the post-earthquake hazard of the 2017 Pohang earthquake considering seismic site effects. ISPRS International Journal of Geo-Information, 2018, 7(9): 375

[21] Lee SH, Sun CG, Yoon JK, Kim DS. Development and verification of a new site classification system and site coefficients for regions of shallow bedrock in Korea. Journal of Earthquake Engineering, 2012, 16(6): 795-819

[22] McPherson A, Hall L. Site classification for earthquake hazard and risk assessment in Australia. Bulletin of the Seismological Society of America, 2013, 103(2A): 1085-1102

[23] MPSS (Ministry of Public Safety and Security) Minimum requirements for seismic design, 2017, Sejong City, South Korea: Ministry of Public Safety and Security (in Korean)

[24] Olea R. Geostatistical glossary and multilingual dictionary, 1991, New York: Oxford University Press

[25] Öztürk CA, Nasuf E. Geostatistical assessment of rock zones for tunneling. Tunnelling and Underground Space Technology, 2002, 17: 275-285

[26] Rodriguez-Marek A, Bray JD, Abrahamson NA. An empirical geotechnical seismic site response procedure. Earthquake Spectra, 2001, 17(1): 65-87

[27] Sun, C.G. 2004. Geotechnical information system and site amplification characteristics for earthquake ground motions at Inland of the Korean Peninsula. Ph.D. dissertation. Seoul, South Korea: Seoul National University.

[28] Sun CG. Seismic zonation on site responses in Daejeon by building geotechnical information system based on spatial GIS framework. Journal of the Korean Geotechnical Society, 2009, 25(1): 5-19 (in Korean)

[29] Sun CG. Suggestion of additional criteria for site categorization in Korea by quantifying regional specific characteristics on seismic response. Geophysics and Geophysical Exploration, 2010, 13(3): 203-218 (in Korean)

[30] Sun CG. Applications of a GIS-based geotechnical tool to assess spatial earthquake hazards in an urban area. Environmental Earth Sciences, 2012, 65(7): 1987-2001

[31] Sun CG, Kim HS. Geostatistical assessment for the regional zonation of seismic site effects in a coastal urban area using a GIS framework. Bulletin of Earthquake Engineering, 2016, 14(8): 2161-2183

[32] Sun CG, Kim HS. GIS-based regional assessment of seismic site effects considering the spatial uncertainty of site-specific geotechnical characteristics in coastal and inland urban areas. Geomatics, Natural Hazards and Risk, 2017, 8(2): 1592-1621

[33] Sun CG, Chung CK, Kim DS. A proposition of site coefficients and site classification system for design ground motions at inland of the Korean Peninsula. Journal of the Korean Geotechnical Society, 2005, 21(6): 101-115 (in Korean)

[34] Sun CG, Chun SH, Ha TG, Chung CK, Kim DS. Development and application of a GIS-based tool for earthquake-induced hazard prediction. Computers and Geotechnics, 2008, 35(3): 436-449

[35] Sun CG, Jung BS, Kim JH, Hong SK, Kim KS. Implementation of an earthquake alarming system based on acceleration monitoring at coastal LNG receiving terminals. Journal of Engineering Geology, 2010, 20(3): 339-348 (in Korean)

[36] Sun CG, Kim HS, Chung CK, Chi HC. Spatial zonations for regional assessment of seismic site effects in the Seoul metropolitan area. Soil Dynamics and Earthquake Engineering, 2014, 56: 44-56

[37] Wald DJ, Allen TI. Topographic slope as a proxy for seismic site conditions and amplification. Bulletin of the Seismological Society of America, 2007, 97(5): 1379-1395

[38] Webster R, Oliver MA. Geostatistics for environmental scientists, 2001, Chichester, UK: John Wiley and Sons

[39] Wills CJ, Petersen M, Bryant WA, Reichle M, Saucedo GJ, Tan S, Taylor G, Treiman J. A site-conditions map for California based on geology and shear-wave velocity. Bulletin of the Seismological Society of America, 2000, 90(6B): 187-208

[40] Yu D, Sheikholeslami G, Zhang A. Findout: Finding outliers in very large datasets. Knowledge and Information Systems, 2002, 4: 387-412