Co-located quantitative trait loci mediate resistance to Agrobacterium tumefaciens, Phytophthora cinnamomi, and P. pini in Juglans microcarpa × J. regia hybrids

Abstract

Soil-borne plant pathogens represent a serious threat that undermines commercial walnut (Juglans regia) production worldwide. Crown gall, caused by Agrobacterium tumefaciens, and Phytophthora root and crown rots, caused by various Phytophthora spp., are among the most devastating walnut soil-borne diseases. A recognized strategy to combat soil-borne diseases is adoption of resistant rootstocks. Here, resistance to A. tumefaciens, P. cinnamomi, and P. pini is mapped in the genome of Juglans microcarpa, a North American wild relative of cultivated walnut. Half-sib J. microcarpa mother trees DJUG 31.01 and DJUG 31.09 were crossed with J. regia cv. Serr, producing 353 and 400 hybrids, respectively. Clonally propagated hybrids were genotyped by sequencing to construct genetic maps for the two populations and challenged with the three pathogens. Resistance to each of the three pathogens was mapped as a major QTL on the long arm of J. microcarpa chromosome 4D and was associated with the same haplotype, designated as haplotype b, raising the possibility that the two mother trees were heterozygous for a single Mendelian gene conferring resistance to all three pathogens. The deployment of this haplotype in rootstock breeding will facilitate breeding of a walnut rootstock resistant to both crown gall and Phytophthora root and crown rots.

References

[1] Potter, D., Gao, F. Y., Baggett, S., McKenna, J. R. & McGranahan, G. H. Defining the sources of Paradox: DNA sequence markers for North American walnut (Juglans L.) species and hybrids. Sci. Hortic.-Amst. 94, 157-170 (2002).

[2] Browne, G. T. et al. Resistance to species of Phytophthora identified among clones of Juglans microcarpa x J. regia. Hortscience 50, 1136-1142 (2015).

[3] Kluepfel, D. A. et al. Evaluation of wild walnut Juglans spp. for resistance to crown gall disease. Phytopathology 101, S92- S92 (2011).

[4] Zhu, T. et al. Sequencing a Juglans regia × J. microcarpa hybrid yields high-quality genome assemblies of parental species. Hort. Res. 6, 55 (2019).

[5] Luo, M.-C. et al. Synteny analysis in Rosids with a walnut physical map reveals slow genome evolution in long-lived woody perennials. BMC Genomics 16, https://doi.org/10.1186/S12864-015-1906-5 (2015).

[6] Sule, S. & Burr, T. J. The effect of resistance of rootstocks to crown gall (Agrobacterium spp.) on the susceptibility of scions in grape vine cultivars. Plant Pathol. 47, 84-88 (1998).

[7] Kuczmog, A. et al. Mapping of crown gall resistance locus Rcg1 in grapevine. Theor. Appl. Genet. 125, 1565-1574 (2012).

[8] Bliss, F. A., Almehdi, A. A., Dandekar, A. M., Schuerman, P. L. & Bellaloui, N. Crown gall resistance in accessions of 20 Prunus species. Hortscience 34, 326-330 (1999).

[9] Moriya, S. et al. Evaluation and inheritance of crown gall resistance in apple rootstocks. J. Jpn. Soc. Hort. Sci. 77, 236-241 (2008).

[10] Moriya, S. et al. Genetic mapping of the crown gall resistance gene of the wild apple Malus sieboldii. Tree Genet. Genomes 6, 195-203 (2010).

[11] Zhou, L. et al. Varietal differences in resistance to crown gall disease among rose cultivars by in vitro testing. J. Jpn. Soc. Hort. Sci. 68, 440-445 (1999).

[12] Robbs, S. L., Hawes, M. C., Lin, H. J., Pueppke, S. G. & Smith, L. Y. Inheritance of resistance to crown gall in Pisum sativum. Plant Physiol. 95, 52-57 (1991).

[13] Nam, J., Matthysse, A. G. & Gelvin, S. B. Differences in susceptibility of Arabidopsis ecotypes to crown gall disease may result from a deficiency in T-DNA integration. Plant Cell 9, 317-333 (1997).

[14] Mysore, K. S., Nam, J. & Gelvin, S. B. An Arabidopsis histone H2A mutant is deficient in Agrobacterium T-DNA integration. Proc. Natl Acad. Sci. USA 97, 948-953 (2000).

[15] Santos, C. et al. First interspecific genetic linkage map for Castanea sativa x Castanea crenata revealed QTLs for resistance to Phytophthora cinnamomi. Plos ONE 12, https://doi.org/10.1371/journal.pone.0184381 (2017).

[16] Zhebentyayeva, T. N. et al. Dissecting resistance to Phytophthora cinnamomi in interspecific hybrid chestnut crosses using sequence-based genotyping and QTL mapping. Phytopathology 109, 1594-1604 (2019).

[17] Paterson, A. H. et al. Resolution of quantitative traits into Mendelian factors by using a complete linkage map of restriction fragment polymorphism. Nature 225, 721-726 (1988).

[18] You, F. M. et al. Genome-wide SNP discovery in walnut with an AGSNP pipeline updated for SNP discovery in allogamous organisms. BMC Genomics 13, 354 (2012).

[19] Stevens, K. A. et al. Genomic variation among and within six Juglans species. G3: Genes|Genomes|Genetics, https://doi.org/10.1534/g3.118.200030 (2018).

[20] Marrano, A., Sideli, G. M., Leslie, C. A., Cheng, H. & Neale, D. B. Deciphering of the genetic control of phenology, yield, and pellicle color in Persian walnut (Juglans regia L.). Front Plant Sci. 10, 1140 (2019).

[21] Elshire, R. J. et al. A robust, simple genotyping-by-sequencing (GBS) approach for high diversity species. Plos ONE 6, e19379 (2011).

[22] Bradbury, P. J. et al. TASSEL: software for association mapping of complex traits in diverse samples. Bioinformatics 23, 2633-2635 (2007).

[23] Lincoln, S. E. & Lander, E. S. Systematic detection of errors in genetic linkage data. Genomics 14, 604-610 (1992).

[24] Aradhya, M. K. et al. A fine-scale genetic linkage map reveals genomic regions associated with economic traits in walnut (Juglans regia). Plant Breed. 138, 635-646 (2019).

[25] Marrano, A. et al. High-quality chromosome-scale assembly of the walnut (Juglans regia L.) reference genome. Gigascience 9, https://doi.org/10.1093/gigascience/giaa050 (2020).

[26] Wisser, R. J., Sun, Q., Hulbert, S. H., Kresovich, S. & Nelson, R. J. Identification and characterization of regions of the rice genome associated with broad-spectrum, quantitative disease resistance. Genetics 169, 2277-2293 (2005).

[27] Leslie, C. & McGranahan, G. H. In Biotechnology in Agriculture and Forestry, High-Tech and Micropropagation II Vol. 18 (ed Y. P. S. Bajaj) 136-150 (Springer-Verlag, 1992).

[28] Matkin, O. P., Chandler, P. A. & Baker, K. F. In UC system for producing healthy container-grown plants (ed K. F. Baker ) 68-85 (University of California, Berkeley, CA, 1957).

[29] Mangandi, J. et al. pedigree-based analysis in a multiparental population of octoploid strawberry reveals QTL alleles conferring resistance to Phytophthora cactorum. G3-Genes Genom. Genet. 7, 1707-1719 (2017).

[30] Bates, D., Machler, M., Bolker, B. M. & Walker, S. C. Fitting linear mixed-effects models using lme4. J. Stat. Softw. 67, 1-48 (2015).

[31] Murray, M. G. & Thompson, W. F. Rapid isolation of high molecular weight plant DNA. Nucleic Acids Res. 8, 4321-4325 (1980).

[32] Glaubitz, J. C. et al. TASSEL-GBS: a high capacity genotyping by sequencing analysis pipeline. Plos ONE 9, https://doi.org/10.1371/journal.pone.0090346 (2014).

[33] Danecek, P. et al. The variant call format and VCFtools. Bioinformatics 27, 2156-2158 (2011).

[34] Danecek, P. & McCarthy, S. A. BCFtools/csq: haplotype-aware variant consequences. Bioinformatics 33, 2037-2039 (2017).

[35] JoinMap® 4.1. Software for calculation of genetic linkage maps in experimental populations ( Kyazma B. V., Wageningen, the Netherlands, 2006).

[36] Stam, B. Construction of integrated linkage maps by means of a new computer package: JoinMap. Plant J. 5, 739-744 (1993).

[37] Kosambi, D. D. The estimation of map distances from recombination values. Ann. Eugen. 12, 172-175 (1943).

[38] MapQTL® 6, Software for the mapping of quantitative trait in experiment populations of diploid species (Kyazma B. V., Wageningen, Netherlands, 2009).

[39] Jansen, R. C. Interval mapping of multiple quantitative trait loci. Genetics 135, 205-211 (1993).

[40] Jansen, R. C. Controlling the type I and type II errors in mapping quantitative trait loci. Genetics 138, 871-881 (1994).

[41] R: A language and environment for statistical computing (https://www.R-project.org/, Foundation for Statistical Computing, Vienna, Austria. URL, 2018).

[42] Virtanen, P. et al. SciPy 1.0: fundamental algorithms for scientific computing in Python. Nat. Methods 17, 261-272 (2020).

[43] D3.js-data-driven documents (2016).

[44] Hunter, J. D. Matplotlib: a 2D graphics environment. Comput. Sci. Eng. 9, 90-95 (2007).