Cover illustration
Cheng YUAN, Shiming ZHANG, Jiujun ZHANG. Oxygen reduction electrocatalysis: From conventional to single-atomic platinum-based catalysts for proton exchange membrane fuel cells. p206-222
Platinum (Pt)-based materials are still the most efficient and practical catalysts to drive the sluggish kinetics of cathodic oxygen reduction reaction (ORR) in proton exchange membrane fuel cells (PEMFCs). However, their catalysis and stability performance still need to be further improv
[Detail] ...
The Haber-Bosch process is the most widely used synthetic ammonia technology at present. Since its invention, it has provided an important guarantee for global food security. However, the traditional Haber-Bosch ammonia synthesis process consumes a lot of energy and causes serious environmental pollution. Under the serious pressure of energy and environment, a green, clean, and sustainable ammonia synthesis route is urgently needed. Electrochemical synthesis of ammonia is a green and mild new method for preparing ammonia, which can directly convert nitrogen or nitrate into ammonia using electricity driven by solar, wind, or water energy, without greenhouse gas and toxic gas emissions. Herein, the basic mechanism of the nitrogen reduction reaction (NRR) to ammonia and nitrate reduction reaction (
The electrochemistry of cathode materials for sodium-ion batteries differs significantly from lithium-ion batteries and offers distinct advantages. Overall, the progress of commercializing sodium-ion batteries is currently impeded by the inherent inefficiencies exhibited by these cathode materials, which include insufficient conductivity, slow kinetics, and substantial volume changes throughout the process of intercalation and deintercalation cycles. Consequently, numerous methodologies have been utilized to tackle these challenges, encompassing structural modulation, surface modification, and elemental doping. This paper aims to highlight fundamental principles and strategies for the development of sodium transition metal oxide cathodes. Specifically, it emphasizes the role of various elemental doping techniques in initiating anionic redox reactions, improving cathode stability, and enhancing the operational voltage of these cathodes, aiming to provide readers with novel perspectives on the design of sodium metal oxide cathodes through the doping approach, as well as address the current obstacles that can be overcome/alleviated through these dopant strategies.
Great progress has been made in the electrochromic (EC) technology with potential applications in various fields. As one of the most promising EC materials, Prussian blue (PB) has attracted great attention due to its excellent EC performance, such as low cost, easy synthesis, rich color states, chemical stability, suitable redox potential, and fast color-switching kinetics. This review summarizes the recent progress in PB electrodes and devices, including several typical preparation techniques of PB electrodes, as well as the recent key strategies for enhancing EC performance of PB electrodes. Specifically, PB-based electrochromic devices (ECDs) have been widely used in various fields, such as smart windows, electrochromic energy storage devices (EESDs), wearable electronics, smart displays, military camouflage, and other fields. Several opportunities and obstacles are suggested for advancing the development of PB-based ECDs. This comprehensive review is expected to offer valuable insights for the design and fabrication of sophisticated PB-based ECDs, enabling their practical integration into real-world applications.
Due to its fascinating and tunable optoelectronic properties, semiconductor nanomaterials are the best choices for multidisciplinary applications. Particularly, the use of semiconductor photocatalysts is one of the promising ways to harness solar energy for useful applications in the field of energy and environment. In recent years, metal oxide-based tailored semiconductor photocatalysts have extensively been used for photocatalytic conversion of carbon dioxide (CO2) into fuels and other useful products utilizing solar energy. This is very significant not only from renewable energy consumption but also from reducing global warming point of view. Such current research activities are promising for a better future of society. The present mini-review is focused on recent developments (2–3 years) in metal oxide semiconductor hybrid photocatalysts-based photo-electrochemical conversion of CO2 into fuels and other useful products. First, general mechanism of photo-electrochemical conversion of CO2 into fuels or other useful products has been discussed. Then, various metal oxide-based emerging hybrid photocatalysts including tailoring of their morphological, compositional, and optoelectronic properties have been discussed with emphasis on their role in enhancing photo-electrochemical efficienty. Afterwards, mechanism of their photo-electrochemical reactions and applications in CO2 conversion into fuels/other useful products have been discussed. Finally, challenges and future prospects have been discussed followed by a summary.
Platinum (Pt)-based materials are still the most efficient and practical catalysts to drive the sluggish kinetics of cathodic oxygen reduction reaction (ORR) in proton exchange membrane fuel cells (PEMFCs). However, their catalysis and stability performance still need to be further improved in terms of corrosion of both carbon support and Pt catalyst particles as well as Pt loading reduction. Based on the developed synthetic strategies of alloying/nanostructuring Pt particles and modifying/innovating supports in developing conventional Pt-based catalysts, Pt single-atom catalysts (Pt SACs) as the recently burgeoning hot materials with a potential to achieve the maximum utilization of Pt are comprehensively reviewed in this paper. The design thoughts and synthesis of various isolated, alloyed, and nanoparticle-contained Pt SACs are summarized. The single-atomic Pt coordinating with non-metals and alloying with metals as well as the metal-support interactions of Pt single-atoms with carbon/non-carbon supports are emphasized in terms of the ORR activity and stability of the catalysts. To advance further research and development of Pt SACs for viable implementation in PEMFCs, various technical challenges and several potential research directions are outlined.
As the intersection of disciplines deepens, the field of battery modeling is increasingly employing various artificial intelligence (AI) approaches to improve the efficiency of battery management and enhance the stability and reliability of battery operation. This paper reviews the value of AI methods in lithium-ion battery health management and in particular analyses the application of machine learning (ML), one of the many branches of AI, to lithium-ion battery state of health (SOH), focusing on the advantages and strengths of neural network (NN) methods in ML for lithium-ion battery SOH simulation and prediction. NN is one of the important branches of ML, in which the application of NNs such as backpropagation NN, convolutional NN, and long short-term memory NN in SOH estimation of lithium-ion batteries has received wide attention. Reports so far have shown that the utilization of NN to model the SOH of lithium-ion batteries has the advantages of high efficiency, low energy consumption, high robustness, and scalable models. In the future, NN can make a greater contribution to lithium-ion battery management by, first, utilizing more field data to play a more practical role in health feature screening and model building, and second, by enhancing the intelligent screening and combination of battery parameters to characterize the actual lithium-ion battery SOH to a greater extent. The in-depth application of NN in lithium-ion battery SOH will certainly further enhance the science, reliability, stability, and robustness of lithium-ion battery management.
Proton exchange membrane fuel cells (PEMFCs) are playing irreplaceable roles in the construction of the future sustainable energy system. However, the insufficient performance of platinum (Pt)-based electrocatalysts for oxygen reduction reaction (ORR) hinders the overall efficiency of PEMFCs. Engineering the surface strain of catalysts is considered an effective way to tune their electronic structures and therefore optimize catalytic behavior. In this paper, insights into strain engineering for improving Pt-based catalysts toward ORR are elaborated in detail. First, recent advances in understanding the strain effects on ORR catalysts are comprehensively discussed. Then, strain engineering methodologies for adjusting Pt-based catalysts are comprehensively discussed. Finally, further information on the various challenges and potential prospects for strain modulation of Pt-based catalysts is provided.
