Performance enhancement, economic analysis, and futuristic insight of single-well medium-deep and deep geothermal systems

Abstract

Geothermal energy is clean and renewable, derived from the heat stored within accessible depths of the Earth’s crust. The adoption of a single-well system for medium-deep and deep geothermal energy extraction has attracted significant interest from the scientific and industrial communities because it effectively circumvents issues such as downhole inter-well connections and induced seismicity. However, the low heat transfer capacity in geothermal formations limits the heat extraction performance of single-well systems and hinders their commercial deployment. This review covers various enhancement concepts for optimizing the heat transfer within single-well systems, emphasizing critical parameters such as heat transfer area, heat transfer coefficient, and temperature difference. Additionally, it presents the thermo-economic evaluation of different configurations of single-well borehole heat exchangers and super-long gravity heat pipes (SLGHPs). The SLHGP, utilizing phase-change heat transfer, is recognized as a highly effective and continuously productive technology, capable of extracting over 1 MW of heat. Its pumpless operation and ease of installation in abandoned wells make it cost-effective, offering a promising economic advantage over traditional geothermal systems. It also highlights the challenges and potential research opportunities that can help identify gaps in research to enhance the performance of single-well geothermal systems.

Graphical abstract

Keywords

borehole heat exchanger / coaxial downhole heat exchangers / geothermal energy exploitation / single-well system / super-long gravity heat pipe

References

[1] Huang Y, Zhang Y, Hu Z. . Economic analysis of heating for an enhanced geothermal system based on a simplified model in Yitong Basin, China. Energy Science & Engineering, 2019, 7(6): 2658–2674

[2] Zhu J, Hu K, Lu X. . A review of geothermal energy resources, development, and applications in China: Current status and prospects. Energy, 2015, 93: 466–483

[3] Srimuang W, Amatachaya P. A review of the applications of heat pipe heat exchangers for heat recovery. Renewable & Sustainable Energy Reviews, 2012, 16(6): 4303–4315

[4] Moya D, Aldás C, Kaparaju P. Geothermal energy: Power plant technology and direct heat applications. Renewable & Sustainable Energy Reviews, 2018, 94: 889–901

[5] BeerepootM. Technology roadmap—Geothermal heat and power. International Energy Agency 44 Report, 2011

[6] Tester J W, Beckers K F, Hawkins A J. . The evolving role of geothermal energy for decarbonizing the United States. Energy & Environmental Science, 2021, 14(12): 6211–6241

[7] Huang Y, Zhang Y, Xie Y. . Long-term thermal performance analysis of deep coaxial borehole heat exchanger based on field test. Journal of Cleaner Production, 2021, 278: 123396

[8] International Renewable Energy Agency (IREA). Renewable Power Generation Costs in 2021. 2022

[9] Giardini D. Geothermal quake risks must be faced. Nature, 2009, 462(7275): 848–849

[10] Olasolo P, Juárez M C, Morales M P. . Enhanced geothermal systems (EGS): A review. Renewable & Sustainable Energy Reviews, 2016, 56: 133–144

[11] Tester J W, Anderson B J, Batchelor A S. . Impact of enhanced geothermal systems on US energy supply in the twenty-first century. Philosophical Transactions—Royal Society. Mathematical, Physical, and Engineering Sciences, 2007, 365(1853): 1057–1094

[12] Liao Y, Sun X, Sun B. . Geothermal exploitation and electricity generation from multibranch U-shaped well-enhanced geothermal system. Renewable Energy, 2021, 163: 2178–2189

[13] Zhu N, Hu P, Xu L. . Recent research and applications of ground source heat pump integrated with thermal energy storage systems: A review. Applied Thermal Engineering, 2014, 71(1): 142–151

[14] Haraden J. The status of hot dry rock as an energy source. Energy, 1992, 17(8): 777–786

[15] Huang Y, Zhang Y, Yu Z. . Experimental investigation of seepage and heat transfer in rough fractures for enhanced geothermal systems. Renewable Energy, 2019, 135: 846–855

[16] Huang W, Cao W, Jiang F. Heat extraction performance of EGS with heterogeneous reservoir: A numerical evaluation. International Journal of Heat and Mass Transfer, 2017, 108: 645–657

[17] Lu S M. A global review of enhanced geothermal system (EGS). Renewable & Sustainable Energy Reviews, 2018, 81: 2902–2921

[18] Cao W, Huang W, Jiang F. Numerical study on variable thermophysical properties of heat transfer fluid affecting EGS heat extraction. International Journal of Heat and Mass Transfer, 2016, 92: 1205–1217

[19] Kim K, Ree J, Kim Y. . Assessing whether the 2017 MW 5.4 Pohang earthquake in South Korea was an induced event. Science, 1979, 2018(1009): 1007–1009

[20] CollinsM A, Law R. The development and deployment of geothermal single well (DGSW) technology in the United Kingdom. European Geologist, 2017: 63–68

[21] Wang Z, McClure M W, Horne R N. Modeling studies of single-well EGS configurations. Transactions—Geothermal Resources Council, 2009, 33: 243–247

[22] Liang H, Guo X, Gao T. . Performance analysis of single-well enhanced geothermal system for building heating. The Scientific World Journal, 2020, 2020: 1–8

[23] Erol S, Harcouët-Menou V, Laenen B. . Efficiency of single-well geothermal systems with multi-lateral drills. Geothermics, 2021, 89: 101928

[24] Alimonti C, Soldo E, Bocchetti D. . The wellbore heat exchangers: A technical review. Renewable Energy, 2018, 123: 353–381

[25] WangZ, Mcclure M W, HorneR N. A single-well EGS configuration using a thermosiphon. In: 34th Workshop on Geothermal Reservoir Engineering, 2009

[26] Lyu Z, Song X, Li G. . Numerical analysis of characteristics of a single U-tube downhole heat exchanger in a geothermal well. Geothermics, 2018, 72: 15–23

[27] Lund J W. The use of downhole heat exchangers. Geothermics, 2003, 32(4-6): 535–543

[28] Nalla G, Shook G M, Mines G L. . Parametric sensitivity study of operating and design variables in wellbore heat exchangers. Geothermics, 2005, 34(3): 330–346

[29] Ozgener O, Hepbasli A. Performance analysis of a solar-assisted ground-source heat pump system for greenhouse heating: An experimental study. Building and Environment, 2005, 40(8): 1040–1050

[30] Wang G, Song X, Shi Y. . Comparison of production characteristics of various coaxial closed-loop geothermal systems. Energy Conversion and Management, 2020, 225: 113437

[31] Shi Y, Song X, Li G. . Numerical investigation on heat extraction performance of a downhole heat exchanger geothermal system. Applied Thermal Engineering, 2018, 134: 513–526

[32] AcuñaJ. Improvements of U-pipe borehole heat exchangers. Dissertation for the Doctoral Degree. Stockholm: KTH Royal Institute of Technology, 2010

[33] Yildirim N, Parmanto S, Akkurt G G. Thermodynamic assessment of downhole heat exchangers for geothermal power generation. Renewable Energy, 2019, 141: 1080–1091

[34] AcuñaJ. Distributed thermal response tests new insights on U-pipe and coaxial heat exchangers in groundwater-filled boreholes. Dissertation for the Doctoral Degree. Stockholm: KTH Royal Institute of Technology, 2013

[35] Wang J. Comparative heat transfer efficiency study of coaxial and U-loop boreholes. GSTF Journal of Engineering Technology, 2014, 2: 1–6

[36] Wang H J, Xu Y S, Sun Y K. . Heat extraction by deep coaxial borehole heat exchanger for clean space heating near Beijing, China: Field test, model comparison and operation pattern evaluation. Renewable Energy, 2022, 199: 803–815

[37] Dai J, Li J, Wang T. . Thermal performance analysis of coaxial borehole heat exchanger using liquid ammonia. Energy, 2023, 263: 125986

[38] Gascuel V, Raymond J, Rivard C. . Design and optimization of deep coaxial borehole heat exchangers for cold sedimentary basins. Geothermics, 2022, 105: 102504

[39] Gascuel V, Rivard C, Raymond J. Deep geothermal doublets versus deep borehole heat exchangers: A comparative study for cold sedimentary basins. Applied Energy, 2024, 361: 122826

[40] Jiang F, Huang W, Cao W. Mining hot dry rock geothermal energy by heat pipe: conceptual design and technical feasibility study. Advances in New and Renewable Energy, 2017, 5: 426–434

[41] Huang W, Chen J, Cen J. . Heat extraction from hot dry rock by super-long gravity heat pipe: Effect of key parameters. Energy, 2022, 248: 123527

[42] Anand R S, Li A, Huang W. . Super-long gravity heat pipe for geothermal energy exploitation—A comprehensive review. Renewable & Sustainable Energy Reviews, 2024, 193: 114286

[43] Li Z, Huang W, Chen J. . An enhanced super-long gravity heat pipe geothermal system: Conceptual design and numerical study. Energy, 2023, 267: 126524

[44] Huang Y, Zhang Y, Xie Y. . Field test and numerical investigation on deep coaxial borehole heat exchanger based on distributed optical fiber temperature sensor. Energy, 2020, 210: 118643

[45] Chen J, Li Z, Huang W. . Super-long gravity heat pipe geothermal space heating system: A practical case in Taiyuan, China. Energy, 2024, 299: 131521

[46] Chen J, Huang W, Cen J. . Heat extraction from hot dry rock by super-long gravity heat pipe: Selection of working fluid. Energy, 2022, 255: 124531

[47] Chen J, Cen J, Huang W. . Multiphase flow and heat transfer characteristics of an extra-long gravity-assisted heat pipe: An experimental study. International Journal of Heat and Mass Transfer, 2021, 164: 120564

[48] Huang W, Chen J, Ma Q. . Developing kilometers-long gravity heat pipe for geothermal energy exploitation. Energy & Environmental Science, 2024, 17(13): 4508–4518

[49] Chen J, Huang W, Cen J. . Operational characteristics of the super-long gravity heat pipe for geothermal energy exploitation. Applied Thermal Engineering, 2024, 236: 121530

[50] Lei H, Liu X, Dai C. Experiment of heat transfer in downhole heat exchangers with a promoter pipe. Transactions—Geothermal Resources Council, 2012, 36(1): 255–258

[51] AllisR G, James R. Natural-convection promoter for geothermal wells. In: Proceedings of Geothermal Resource Council annual meeting, Salt Lake City, UT, USA, 1980

[52] Carotenuto A, Casarosa C, Dell’isola M. . An aquifer-well thermal and fluid dynamic model for downhole heat exchangers with a natural convection promoter. International Journal of Heat and Mass Transfer, 1997, 40(18): 4461–4472

[53] Carotenuto A, Casarosa C. A lumped parameter model of the operating limits of one-well geothermal plant with down hole heat exchangers. International Journal of Heat and Mass Transfer, 2000, 43(16): 2931–2948

[54] Freeston D H, Pan H. The application and design of downhole heat exchanger. Geothermics, 1985, 14(2‒3): 343–351

[55] CulverJ W, Lund G. Downhole heat exchangers. Geo-Heat Center Quarterly Bulletin, 1999

[56] BoydT T. Design of a convection cell for a downhole heat exchanger system in klamath falls, Oregon. In: Proceedings of 34th Workshop on Geothermal Reservoir Engineering Stanford University, Stanford, USA, 2009

[57] Yu C, Zhang Y, Tan Y. . Performance comprehensive evaluation of downhole heat exchanger geothermal systems with various configurations and working fluids. Applied Thermal Engineering, 2022, 213: 118745

[58] Feng Y, Tyagi M, White C D. A downhole heat exchanger for horizontal wells in low-enthalpy geopressured geothermal brine reservoirs. Geothermics, 2015, 53: 368–378

[59] Zhang Y, Yu C, Li G. . Performance analysis of a downhole coaxial heat exchanger geothermal system with various working fluids. Applied Thermal Engineering, 2019, 163: 114317

[60] Cheng W L, Li T T, Le Nian Y. . Evaluation of working fluids for geothermal power generation from abandoned oil wells. Applied Energy, 2014, 118: 238–245

[61] Hu Z, Xu T, Feng B. . Thermal and fluid processes in a closed-loop geothermal system using CO₂ as a working fluid. Renewable Energy, 2020, 154: 351–367

[62] Chen J, Huang W, Cen J. . Heat extraction from hot dry rock by super-long gravity heat pipe: Selection of working fluid. Energy, 2022, 255: 124531

[63] Diglio G, Roselli C, Sasso M. . Borehole heat exchanger with nanofluids as heat carrier. Geothermics, 2018, 72: 112–123

[64] Daneshipour M, Rafee R. Nanofluids as the circuit fluids of the geothermal borehole heat exchangers. International Communications in Heat and Mass Transfer, 2017, 81: 34–41

[65] PengY, Wang Y, DuR. The effect of nanofluid to vertical single U-tube ground heat exchanger. In: Proceedings of BSO 4th Building Simulation and Optimization Conference, Cambridge, UK, 2018

[66] Sun X H, Yan H, Massoudi M. . Numerical simulation of nanofluid suspensions in a geothermal heat exchanger. Energies, 2018, 11(4): 1–18

[67] Javadi H, Urchueguia J F, Mousavi Ajarostaghi S S M. . Impact of employing hybrid nanofluids as heat carrier fluid on the thermal performance of a borehole heat exchanger. Energies, 2021, 14(10): 2892

[68] Jahanbin A, Semprini G, Pulvirenti B. Nanofluid suspensions as heat carrier fluids in single U-tube borehole heat exchangers. Journal of Physics: Conference Series, 2021, 2116: 0–4

[69] Jahanbin A, Semprini G, Pulvirenti B. Performance evaluation of U-tube borehole heat exchangers employing nanofluids as the heat carrier fluid. Applied Thermal Engineering, 2022, 212: 118625

[70] Chappidi S, Kumar A, Singh J. Geothermal energy extraction from abandoned oil and gas wells using mono and hybrid nanofluids. Geothermics, 2023, 114: 102794

[71] Liu J, Wang F, Cai W. . Numerical study on the effects of design parameters on the heat transfer performance of coaxial deep borehole heat exchanger. International Journal of Energy Research, 2019, 43(12): 6337–6352

[72] Hu X, Banks J, Wu L. . Numerical modeling of a coaxial borehole heat exchanger to exploit geothermal energy from abandoned petroleum wells in Hinton, Alberta. Renewable Energy, 2020, 148: 1110–1123

[73] Śliwa T, Kruszewski M, Zare A. . Potential application of vacuum insulated tubing for deep borehole heat exchangers. Geothermics, 2018, 75: 58–67

[74] Kujawa T, Nowak W, Stachel A A. Utilization of existing deep geological wells for acquisitions of geothermal energy. Energy, 2006, 31(5): 650–664

[75] Li G, Yang J, Zhu X. . Numerical study on the heat transfer performance of coaxial shallow borehole heat exchanger. Energy and Built Environment, 2021, 2(4): 445–455

[76] Cheng W L, Liu J, Le Nian Y. . Enhancing geothermal power generation from abandoned oil wells with thermal reservoirs. Energy, 2016, 109: 537–545

[77] GedziusI, Teodoriu C. Innovative development concepts for hot-dry-rock project in the North German Basin. In: DGMK/ÖGEWSpring Conference, Department of Execution and Production, Kassel, Germany, 2011

[78] Song X, Shi Y, Li G. . Numerical simulation of heat extraction performance in enhanced geothermal system with multilateral wells. Applied Energy, 2018, 218: 325–337

[79] TischnerT, Evers H, HauswirthH, et al. New concepts for extracting geothermal energy from one well: The gene sys-project. In: Proceedings of World Geothermal Congress, Bali, Indonesia, 2010

[80] Jung R, Orzol J, Kehrer P, et al.Collaborative project: Genesys – Feasibility study—Testing the waterfrac technique and the single well two-layer process for direct heat use from low-permeability sedimentary rocks, Final Report, 2006

[81] Breede K, Dzebisashvili K, Liu X. . A systematic review of enhanced (or engineered) geothermal systems: Past, present and future. Geothermal Energy, 2013, 1(1): 4

[82] Falcone G, Liu X, Okech R R. . Assessment of deep geothermal energy exploitation methods: The need for novel single-well solutions. Energy, 2018, 160: 54–63

[83] Cui G, Ren S, Zhang L. . Geothermal exploitation from hot dry rocks via recycling heat transmission fluid in a horizontal well. Energy, 2017, 128: 366–377

[84] Sun F, Yao Y, Li G. . Performance of geothermal energy extraction in a horizontal well by using CO₂ as the working fluid. Energy Conversion and Management, 2018, 171: 1529–1539

[85] Hu X, Banks J, Guo Y. . Retrofitting abandoned petroleum wells as doublet deep borehole heat exchangers for geothermal energy production—A numerical investigation. Renewable Energy, 2021, 176: 115–134

[86] Jalaluddin A, Miyara K. . Experimental study of several types of ground heat exchanger using a steel pile foundation. Renewable Energy, 2011, 36(2): 764–771

[87] Xia C, Sun M, Zhang G. . Experimental study on geothermal heat exchangers buried in diaphragm walls. Energy and Building, 2012, 52: 50–55

[88] Park H, Lee S R, Yoon S. . Evaluation of thermal response and performance of PHC energy pile: Field experiments and numerical simulation. Applied Energy, 2013, 103: 12–24

[89] Song X, Shi Y, Li G. . Heat extraction performance simulation for various configurations of a downhole heat exchanger geothermal system. Energy, 2017, 141: 1489–1503

[90] Liu Y, Zhang Y, Gong S. . Analysis on the performance of ground heat exchangers in ground source heat pump systems based on heat transfer enhancements. Procedia Engineering, 2015, 121: 19–26

[91] Liu X, Xiao Y, Inthavong K. . Experimental and numerical investigation on a new type of heat exchanger in ground source heat pump system. Energy Efficiency, 2015, 8(5): 845–857

[92] Serageldin A A, Sakata Y, Katsura T. . Thermo-hydraulic performance of the U-tube borehole heat exchanger with a novel oval cross-section: Numerical approach. Energy Conversion and Management, 2018, 177: 406–415

[93] Choi H K, Yoo G J, Pak J H. . Numerical study on heat transfer characteristics in branch tube type ground heat exchanger. Renewable Energy, 2018, 115: 585–599

[94] Luo J, Zhao H, Gui S. . Thermo-economic analysis of four different types of ground heat exchangers in energy piles. Applied Thermal Engineering, 2016, 108: 11–19

[95] Mehrizi A A, Porkhial S, Bezyan B. . Energy pile foundation simulation for different configurations of ground source heat exchanger. International Communications in Heat and Mass Transfer, 2016, 70: 105–114

[96] Sáez Blázquez C, Farfán Martín A, Martín Nieto I. . Efficiency analysis of the main components of a vertical closed-loop system in a borehole heat exchanger. Energies, 2017, 10(2): 1–15

[97] Westphal D, Weijermars R. Economic appraisal and scoping of geothermal energy extraction projects using depleted hydrocarbon wells. Energy Strategy Reviews, 2018, 22: 348–364

[98] Dahi Taleghani A. An improved closed-loop heat extraction method from geothermal resources. Journal of Energy Resources Technology, 2013, 135(4): 1–7

[99] Sharma P, Al Saedi A Q, Kabir C S. Geothermal energy extraction with wellbore heat exchanger: Analytical model and parameter evaluation to optimize heat recovery. Renewable Energy, 2020, 166: 1–8

[100] Gascuel V, Rivard C, Raymond J. Deep geothermal doublets versus deep borehole heat exchangers: A comparative study for cold sedimentary basins. Applied Energy, 2024, 361: 122826

[101] BüchiH F. Method and apparatus for extracting and utilizing geothermal energy. US Patent No. 4912941 A, 1990

[102] HaraH. Geothermal well using graphite as solid conductor. US Patent No. 20110232858 A1, 2011

[103] RenaudT, Verdin P, FalconeG, et al. Heat transfer modelling of an unconventional, closed-loop geothermal well. In: Proceedings of World Geothermal Congress 2020+1, Reykjavik, Iceland, 2021

[104] Li Z, Huang W, Chen J. . An enhanced super-long gravity heat pipe geothermal system: Conceptual design and numerical study. Energy, 2023, 267: 126524

[105] Sliwa T, Rosen M A. Efficiency analysis of borehole heat exchangers as grout varies via thermal response test simulations. Geothermics, 2017, 69: 132–138

[106] Chen F, Mao J, Chen S. . Efficiency analysis of utilizing phase change materials as grout for a vertical U-tube heat exchanger coupled ground source heat pump system. Applied Thermal Engineering, 2018, 130: 698–709

[107] Oh K, Lee S, Park S. . Field experiment on heat exchange performance of various coaxial-type ground heat exchangers considering construction conditions. Renewable Energy, 2019, 144: 84–96

[108] EswiasiA. Novel pipe configuration for enhanced efficiency of vertical ground heat exchanger (VGHE). Dissertation for the Doctoral Degree. Victoria: University of Victoria, 2021

[109] Song X, Zheng R, Li G. . Heat extraction performance of a downhole coaxial heat exchanger geothermal system by considering fluid flow in the reservoir. Geothermics, 2018, 76: 190–200

[110] HellerK, Teodoriu C, FalconeG. A new deep geothermal concept based on the geyser principle. In: Proceedings of 39th Workshop on Geothermal Reservoir Engineering Stanford University, Stanford, USA, 2014

[111] TeodoriuC, Falcone G, BarcelosJ. The artificial geyser concept—New insights. In: Proceedings of 14th Workshop on Geothermal Reservoir Engineering, Stanford University, Stanford, USA, 2015

[112] He Y L, Tao W Q. Convective heat transfer enhancement: Mechanisms, techniques, and performance evaluation. In: Advances in Heat Transfer, 2014, 46: 87–186

[113] Li Z, Guo J, Huang W. . Heat extraction performance of the super-long gravity heat pipe applied to geothermal reservoirs of multi-aquifers. International Journal of Heat and Mass Transfer, 2024, 225: 125440

[114] Huang W, Cao W, Jiang F. A novel single-well geothermal system for hot dry rock geothermal energy exploitation. Energy, 2018, 162: 630–644

[115] Yildirim N, Parmanto S, Akkurt G G. Thermodynamic assessment of downhole heat exchangers for geothermal power generation. Renewable Energy, 2019, 141: 1080–1091

[116] EPRI. Single-well enhanced geothermal system front-end engineering and design, optimization of a renewable geothermal system for harvesting heat from hot, dry rock. 2011 Technical Report-Electric Power Research Institute, 2011

[117] ParrellaM J. Heat pipes for a single well engineered geothermal system. US Patent No.0248345,2017

[118] MontalvoF E. Current status of geothermal resources development in central America. In: Short Course on Geothermal Development and Geothermal Wells, Santa Tecla, El Salvador, 2012

[119] Zhu Y, Li K, Liu C. . Geothermal power production from abandoned oil reservoirs using in situ combustion technology. Energies, 2019, 12(23): 4476

[120] Tozlu A, Gençaslan B, Özcan H. Thermoeconomic analysis of a hybrid cogeneration plant with use of near-surface geothermal sources in Turkey. Renewable Energy, 2021, 176: 237–250

[121] Cao Y, Dhahad H A, Togun H. . Exergetic and financial parametric analyses and multi-objective optimization of a novel geothermal-driven cogeneration plant; adopting a modified dual binary technique. Sustainable Energy Technologies and Assessments, 2021, 48: 101442

[122] Chen H, Wang Y, Li J. . Thermodynamic analysis and economic assessment of an improved geothermal power system integrated with a biomass-fired cogeneration plant. Energy, 2022, 240: 122477

[123] Wang L, Huang X, Babaei M. . Full-scale utilization of geothermal energy: A high-efficiency CO₂ hybrid cogeneration system with low-temperature waste heat. Journal of Cleaner Production, 2023, 403: 136866

[124] Wang D, Ali M A, Alizadeh A. . Thermoeconomic appraisal of a novel power and hydrogen cogeneration plant with integration of biomass and geothermal energies. International Journal of Hydrogen Energy, 2024, 52: 385–400

[125] Xiao F, Zhao Z, Yang L. Innovative measures for thermal performance enhancement of single well-based deep geothermal systems: Existing solutions and some viable options. Geomechanics and Geophysics for Geo-energy and Geo-resources, 2022, 8(5): 1–19

[126] 126. An enhanced geothermal system combining gravity heat pipes for integrated geothermal development and utilization. China Patent No. CN202111114527.3, 2021 (in Chinese)

[127] Bu X, Jiang K, Guo Z. Storing high temperature solar thermal energy in shallow depth artificial reservoir for space heating. Scientific Reports, 2022, 12(1): 1–13

[128] JiangF, Ma Q, Huang W, et al. A solar-thermal integrated super-long gravity heat pipe geothermal power generation system. China Patent No. CN 219638904U, 2023 (in Chinese)

[129] GoldsteinB, Hiriart G, BertaniR, et al. Chapter 4—Geothermal energy: Geothermal energy in IPCC Special Report on Renewable Energy Sources and Climate Change Mitigation. 2011

[130] Jiang F, Chen J, Huang W, et al. An integrated geothermal system with heat pipe heat extraction for simultaneous cooling, power generation and heating applications. China Patent No. CN113847745A, 2020 (in Chinese)

[131] Kohl T, Brenni R, Eugster W. System performance of a deep borehole heat exchanger. Geothermics, 2002, 31(6): 687–708

[132] Berger E, Grünenfelder T, Keller B. . Geothermal drilling in Lucerne. Bulletin of the Swiss Association of Petroleum Geologists and Engineers, 1994, 61: 17–43

[133] KohlT, Salton M, RybachL. Data analysis of the deep borehole heat exchanger plant Weissbad (Switzerland). In: Proceedings of World Geothermal Congress 2000, Kyushu, Japan, 2000

[134] Gaschnitz R, Preuße A. Deep geothermal heat exchangers—Technical and commercial aspects. Technical Report, RWTH Aachen University, 2001,

[135] Dijkshoorn L, Speer S, Pechnig R. Measurements and design calculations for a deep coaxial borehole heat exchanger in Aachen, Germany. International Journal of Geophysics, 2013, 2013: 1–14

[136] CollinsM A, Law R. The development and deployment of deep geothermal single well (DGSW) technology in the United Kingdom. European Geologist Journal—Geothermal–The Energy of the Future, 2017

[137] ZhangL, Wu Z, DengB. Experimental analysis and modification of an super-long gravity heat pipe. Energy Conservation, 2015, 397: 77–80 (in Chinese)

[138] Huang W, Cen J, Chen J. . Heat extraction from hot dry rock by super-long gravity heat pipe: A field test. Energy, 2022, 247: 123492

[139] MaQ, ChenJ, HuangW, et al. Effect of working fluid on super-long gravity heat pipe geothermal power generation system. In: Proceedings of 7th International Conference on Smart Grid and Smart Cities, Lanzhou, China, 2023

[140] Geothermal Engineering Ltd, Arup, and St Andrews University. Feasibility Report for the Deep Geothermal Single Well (DGSW) at Aberdeen Exhibition and Conference Centre. 2016

[141] Bu X, Ran Y, Zhang D. Experimental and simulation studies of geothermal single well for building heating. Renewable Energy, 2019, 143: 1902–1909

[142] Jia G S, Ma Z D, Xia Z H. . A finite-volume method for full-scale simulations of coaxial borehole heat exchangers with different structural parameters, geological and operating conditions. Renewable Energy, 2022, 182: 296–313

[143] Ma Q, Chen J, Huang W. . Power generation analysis of super-long gravity heat pipe geothermal systems. Applied Thermal Engineering, 2024, 242: 122533

[144] Xiao D, Liu M, Li L. . Model for economic evaluation of closed-loop geothermal systems based on net present value. Applied Thermal Engineering, 2023, 231: 121008

[145] Huang W, Cao W, Li T, Jiang F. Numerical study and economic analysis of gravity heat pipe hot dry rock geothermal system. CIESC Journal, 2021, 72: 1302–1313

[146] Ma Q, Huang W, Chen J. . Thermodynamic and economic performance of super-long gravity heat pipe geothermal power plant. Applied Thermal Engineering, 2024, 248: 123115

[147] Akbarzadeh A, Johnson P, Nguyen T. . Formulation and analysis of the heat pipe turbine for production of power from renewable sources. Applied Thermal Engineering, 2001, 21(15): 1551–1563

[148] Franco A, Vaccaro M. On the use of heat pipe principle for the exploitation of medium-low temperature geothermal resources. Applied Thermal Engineering, 2013, 59(1-2): 189–199

[149] LakicN. Self-contained in-ground geothermal genera tor and heat exchanger with in-line pump. US Patent No. 20130055714 A1, 2018

[150] HuisenV. Geothermal exchange system. US Patent No. 3470943 A, 1969

[151] KayaT, Hoshan P. Corrosion and materials selection for geothermal systems. In: Proceedings of World Geothermal Congress 2005, Antalya, Turkey, 2005

[152] Selamat S, Miyara A, Kariya K. Numerical study of horizontal ground heat exchangers for design optimization. Renewable Energy, 2016, 95: 561–573

[153] Cao S J, Kong X R, Deng Y. . Investigation on thermal performance of steel heat exchanger for ground source heat pump systems using full-scale experiments and numerical simulations. Applied Thermal Engineering, 2017, 115: 91–98

[154] Kim W J, Yoon S, Kim M J. . Thermal performance evaluation of stainless steel pipe as a ground heat exchanger. In: Proceedings of 15th Asian Regional Conference on Soil Mechanics and Geotechnical Engineering, Fukuoka, Japan, 2015,

[155] Hantsch A, Gross U. Numerical investigation of partially-wetted geothermal heat pipe performance. Geothermics, 2013, 47: 97–103

[156] Demir H, Koyun A, AtayilmazŞ Ö. . Investigation of the effects of geometrical parameters on heat transfer from buried finned pipes. Journal of Mechanical Science and Technology, 2013, 27(8): 2497–2506

[157] Bouhacina B, Saim R, Oztop H F. Numerical investigation of a novel tube design for the geothermal borehole heat exchanger. Applied Thermal Engineering, 2015, 79: 153–162

[158] Saeidi R, Noorollahi Y, Esfahanian V. Numerical simulation of a novel spiral type ground heat exchanger for enhancing heat transfer performance of geothermal heat pump. Energy Conversion and Management, 2018, 168: 296–307

[159] Jamshidi N, Mosaffa A. Investigating the effects of geometric parameters on finned conical helical geothermal heat exchanger and its energy extraction capability. Geothermics, 2018, 76: 177–189

[160] Huang Y, Li W, Xu D. . Spatiotemporal rule of heat transfer on a soil/finned tube interface. Sensors, 2019, 19(5): 1159

[161] Saeidi R, Noorollahi Y, Chang S, Yousefi H. A comprehensive study of Fin-assisted horizontal ground heat exchanger for enhancing the heat transfer performance. Energy Conversion and Management: X, 2023, 18: 100359

[162] Ma P, Mo L, Zhang J. . Enhanced heat transfer performance of a new horizontal buried tube heat exchanger. Thermal Science, 2023, 27(2 Part B): 1507–1516

[163] Alizadeh M, Ganji D D. Heat transfer characteristics and optimization of the efficiency and thermal resistance of a finned thermosyphon. Applied Thermal Engineering, 2021, 183: 116136

[164] Maleki Zanjani A, Gharali K, Al-Haq A. . Dynamic and static investigation of ground heat exchangers equipped with internal and external fins. Applied Sciences, 2020, 10(23): 1–19

[165] Naresh Y, Balaji C. Experimental investigations of heat transfer from an internally finned two phase closed thermosyphon. Applied Thermal Engineering, 2017, 112: 1658–1666

[166] Hakim I I, Putra N, Gunawan Y. Experimental study for heat pipe applications on low enthalpy geothermal energy utilization for agricultural products dryers. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 2019, 56: 68–77

[167] Kim Y, Kim J S, Shin D H. . Enhanced thermal performance of a thermosyphon for waste heat recovery: Microporous coating at evaporator and hydrophobic coating at condenser. Applied Thermal Engineering, 2020, 175: 115332

[168] Ng V O, Yu H, Wu H A. . Thermal performance enhancement and optimization of two-phase closed thermosyphon with graphene-nanoplatelets coatings. Energy Conversion and Management, 2021, 236: 114039

[169] Hosseinzadeh K, Ganji D D, Ommi F. Effect of SiO₂ super-hydrophobic coating and self-rewetting fluid on two phase closed thermosyphon heat transfer characteristics: An experimental and numerical study. Journal of Molecular Liquids, 2020, 315: 113748

[170] Liu H, Gan W, Yao H. . Visualization and heat transfer comparative analysis of two phase closed thermosyphon. Applied Thermal Engineering, 2022, 217: 119172

[171] Liu H, Wang X, Zheng L. . Temperature response and thermal performance analysis of a super-long flexible thermosyphon for shallow geothermal utilization: Field test and numerical simulation. International Journal of Heat and Mass Transfer, 2022, 192: 122915

[172] Javed S, Spitler J. Accuracy of borehole thermal resistance calculation methods for grouted single U-tube ground heat exchangers. Applied Energy, 2017, 187: 790–806

[173] ASHRAE. Geothermal Energy. In: ASHRAE Handbook—HVAC Applications (SI). 2015

[174] Mahmoud M, Ramadan M, Pullen K. . A review of grout materials in geothermal energy applications. International Journal of Thermofluids, 2021, 10: 100070

[175] Lyne Y, Paksoy H, Farid M. Laboratory investigation on the use of thermally enhanced phase change material to improve the performance of borehole heat exchangers for ground source heat pumps. International Journal of Energy Research, 2019, 43(9): 4148–4156

[176] Maheshwary P B, Handa C C, Nemade K R. Effect of shape on thermophysical and heat transfer properties of ZnO/R-134a nanorefrigerant. Materials Today: Proceedings, 2018, 5(1): 1635–1639

[177] Kasaeian A, Hosseini S M, Sheikhpour M. . Applications of eco-friendly refrigerants and nanorefrigerants: A review. Renewable & Sustainable Energy Reviews, 2018, 96: 91–99

[178] Jiang F, Zhu J, Xin G. Experimental investigation on Al₂O₃–R123 nanorefrigerant heat transfer performances in evaporator based on organic Rankine cycle. International Journal of Heat and Mass Transfer, 2018, 127: 145–153

[179] Sharif M Z, Azmi W H, Mamat R. . Mechanism for improvement in refrigeration system performance by using nanorefrigerants and nanolubricants—A review. International Communications in Heat and Mass Transfer, 2018, 92: 56–63

[180] Celen A, Çebi A, Aktas M. . A review of nanorefrigerants: Flow characteristics and applications. International Journal of Refrigeration, 2014, 44: 125–140

[181] Abas N, Kalair A R, Khan N. . Natural and synthetic refrigerants, global warming: A review. Renewable & Sustainable Energy Reviews, 2018, 90: 557–569

[182] Alimoradi H, Shams M, Ashgriz N. Enhancement in the pool boiling heat transfer of copper surface by applying electrophoretic deposited graphene oxide coatings. International Journal of Multiphase Flow, 2023, 159: 104350

[183] Ahmadi V E, Khaksaran M H, Apak A M. . Graphene-coated sintered porous copper surfaces for boiling heat transfer enhancement. Carbon Trends, 2022, 8: 100171

[184] Wu C H, Lee Y A, Lai Y J. . Heat transfer enhancement of a multilayer graphene coating surface. Experimental Thermal and Fluid Science, 2020, 118: 110175

[185] Pecherkin N, Pavlenko A, Volodin O. . Experimental study of heat transfer enhancement in a falling film of R21 on an array of horizontal tubes with MAO coating. International Communications in Heat and Mass Transfer, 2021, 129: 105743

[186] Surtaev A, Kuznetsov D, Serdyukov V. . Structured capillary-porous coatings for enhancement of heat transfer at pool boiling. Applied Thermal Engineering, 2018, 133: 532–542

[187] Joseph A, Mohan S, Sujith Kumar C S. . An experimental investigation on pool boiling heat transfer enhancement using sol-gel derived nano-CuO porous coating. Experimental Thermal and Fluid Science, 2019, 103: 37–50

[188] Xu P, Li Q, Xuan Y. Enhanced boiling heat transfer on composite porous surface. International Journal of Heat and Mass Transfer, 2015, 80: 107–114

[189] Lee S, Seo G H, Lee S. . Layer-by-layer carbon nanotube coatings for enhanced pool boiling heat transfer on metal surfaces. Carbon, 2016, 107: 607–618

[190] Lee J, Kim J, Seo B. . Layer-by-layer solution-processed two-dimensional graphene oxide–polyethylenimine thin-film coatings for enhanced pool boiling heat transfer. International Journal of Heat and Mass Transfer, 2023, 209: 124067

[191] Brusly Solomon A, Mathew A, Ramachandran K. . Thermal performance of anodized two phase closed thermosyphon (TPCT). Experimental Thermal and Fluid Science, 2013, 48: 49–57

[192] Hong S J, Zheng X, Park C W. Enhanced flow boiling heat transfer characteristics of R134a on graphene-Cu nanocomposite coating on copper substrate. International Communications in Heat and Mass Transfer, 2019, 108: 104343

[193] Senthilkumar C, Krishnan A S, Solomon A B. Effect of thin porous copper coating on the performance of wickless heat pipe with R134a as working fluid. Journal of Thermal Analysis and Calorimetry, 2020, 139(2): 963–973

[194] Sarangi S, Weibel J A, Garimella S V. Effect of particle size on surface-coating enhancement of pool boiling heat transfer. International Journal of Heat and Mass Transfer, 2015, 81: 103–113

[195] Li C, Zou Y, Shen Z. . Effect of graphene oxide coating on bubble dynamics and nucleate pool boiling heat transfer. Advanced Powder Technology, 2023, 34:

[196] Raymond J, Mercier S, Nguyen L. Designing coaxial ground heat exchangers with a thermally enhanced outer pipe. Geothermal Energy, 2015, 3(1): 7

[197] Gupta S K, Misra R D. An experimental investigation on flow boiling heat transfer enhancement using Cu-TiO₂ nanocomposite coating on copper substrate. Experimental Thermal and Fluid Science, 2018, 98: 406–419

[198] Choi G, Yun M, Hsu W T. . Enhanced boiling heat transfer by nucleation patterning with self-assembly of reduced graphene oxide coating. International Journal of Heat and Mass Transfer, 2022, 197: 123329

[199] Behera A, Mallick P, Mohapatra S S. Nanocoatings for anticorrosion: An introduction. In: Corrosion Protection at the Nanoscale, 2020, 227–243

[200] Nhiem L T, Oanh D T Y, Hieu N H. Nanocoating toward anti-corrosion: A review. Vietnam Journal of Chemistry, 2023, 61(3): 284–293

[201] Yu W, France D M, Routbort J L. . Review and comparison of nanofluid thermal conductivity and heat transfer enhancements. Heat Transfer Engineering, 2008, 29(5): 432–460

[202] Quintino L. Overview of coating technologies. Surface Modification by Solid State Processing, 2014, 1–24

[203] Wang X Q, Mujumdar A S. Heat transfer characteristics of nanofluids: A review. International Journal of Thermal Sciences, 2007, 46(1): 1–19

[204] Panda A, Pati A R, Kumar A. . Dropwise evaporation of hydrophilic coolant droplets: A methodology for the development of hydrophilic coating and attainment of enhanced heat transfer. International Communications in Heat and Mass Transfer, 2019, 105: 19–27

[205] Li C, Zou Y, Shen Z. . Effect of graphene oxide coating on bubble dynamics and nucleate pool boiling heat transfer. Advanced Powder Technology, 2023, 34(8): 104080

[206] Chen Y, Fu R, Yan Y. Enhanced pool boiling heat transfer on grooved surfaces by wettability modification with nanoparticle coatings. International Communications in Heat and Mass Transfer, 2022, 137: 106298

[207] Gupta M, Singh V, Kumar S. . Experimental analysis of heat transfer behavior of silver, MWCNT and hybrid (silver + MWCNT) nanofluids in a laminar tubular flow. Journal of Thermal Analysis and Calorimetry, 2020, 142(4): 1545–1559

[208] Ahammed N, Asirvatham L G, Wongwises S. Entropy generation analysis of graphene–alumina hybrid nanofluid in multiport minichannel heat exchanger coupled with thermoelectric cooler. International Journal of Heat and Mass Transfer, 2016, 103: 1084–1097

[209] Sundar L S, Singh M K, Sousa A C M. Turbulent heat transfer and friction factor of nanodiamond-nickel hybrid nanofluids flow in a tube: An experimental study. International Journal of Heat and Mass Transfer, 2018, 117: 223–234

[210] Askari S, Koolivand H, Pourkhalil M. . Investigation of Fe₃O₄/graphene nanohybrid heat transfer properties: Experimental approach. International Communications in Heat and Mass Transfer, 2017, 87: 30–39

[211] Hashemzadeh S, Hormozi F. An experimental study on hydraulic and thermal performances of hybrid nanofluids in mini-channel: A new correlation for viscosity of hybrid nanofluids. Journal of Thermal Analysis and Calorimetry, 2020, 140(3): 891–903

[212] Ataei M, Sadegh Moghanlou F, Noorzadeh S. . Heat transfer and flow characteristics of hybrid Al₂O₃/TiO₂–water nanofluid in a minichannel heat sink. Heat and Mass Transfer, 2020, 56: 2757–2567

[213] Megatif L, Ghozatloo A, Arimi A. . Investigation of laminar convective heat transfer of a novel TiO₂-carbon nanotube hybrid water-based nanofluid. Experimental Heat Transfer, 2016, 29(1): 124–138

[214] Bhattad A, Sarkar J, Ghosh P. Experimentation on effect of particle ratio on hydrothermal performance of plate heat exchanger using hybrid nanofluid. Applied Thermal Engineering, 2019, 162: 114309

[215] Allahyar H R, Hormozi F, ZareNezhad B. Experimental investigation on the thermal performance of a coiled heat exchanger using a new hybrid nanofluid. Experimental Thermal and Fluid Science, 2016, 76: 324–329

[216] Bhattad A, Sarkar J, Ghosh P. Heat transfer characteristics of plate heat exchanger using hybrid nanofluids: Effect of nanoparticle mixture ratio. Heat and Mass Transfer, 2020, 56: 2457–2472

[217] Fotowat S, Askar S, Ismail M. . A study on corrosion effects of a water based nanofluid for enhanced thermal energy applications. Sustainable Energy Technologies and Assessments, 2017, 24: 39–44

[218] HuntR D. Method of enhanced heat extraction from a geothermal heat source for the production of electricity thermoelectrically and mechanically via the high-pressure injection of a cryogen into a U-tube or open tube heat exchanger within a geothermal heat source, US Patent: US20010906951, 2001-7-16

[219] BrysonM. Conversion of low grade heat into electricity using the thermosyphon rankine engine and trilateral flash cycle. Dissertation for the Doctoral Degree. Melbourne: RMIT University, 2007

[220] Nguyen T, Johnson P, Akbarzadeh A. . Design, manufacture and testing of a closed cycle thermosyphon rankine engine. Heat Recovery Systems and CHP, 1995, 15(4): 333–346

[221] NguyenT, Mochizuki M, MashikoM, et al. Heat pipe turbine for production of electrical power from renewable sources. In: Proceedings of 5th ASME/JSME Thermal Engineering Joint Conference, San Diego, USA, 1999

[222] Xie H, Wang J, Liao J. . A novel in-situ power generator system for geothermal resources without fluid extraction. In: Proceedings of 55th US Rock Mechanics/Geomechanics Symposium, Virtual, 2021,

[223] Anand R S, Jawahar C P, Brusly Solomon A. . Experimental investigations on modified thermosyphons using R134a/Al₂O₃ and comparative machine learning analysis. Applied Thermal Engineering, 2022, 212: 118554

[224] Kyuil H, Cho D H. A comparison of the heat transfer performance of thermosyphon using a straight groove and helical groove. Journal of Mechanical Science and Technology, 2005, 19(12): 2296–2302

[225] Han K I, Yee S S, Park S H. . A study on the improvement of heat transfer performance in low temperature closed thermosyphon. KSME International Journal, 2002, 16(9): 1102–1111

[226] Alammar A A, Al-Mousawi F N, Al-Dadah R K. . Enhancing thermal performance of a two-phase closed thermosyphon with an internal surface roughness. Journal of Cleaner Production, 2018, 185: 128–136

[227] Joudi K A, Witwit A M. Improvements of gravity assisted wickless heat pipes. Energy Conversion and Management, 2000, 41(18): 2041–2061

[228] Lin L, Groll M, Rösler S. One-dimensional analysis of maximum performance in a closed two-phase thermosyphon with a crossover flow separator. Heat Transfer Engineering, 1996, 17(3): 19–28

[229] Weinand J M, Vandenberg G, Risch S. . Low-carbon lithium extraction makes deep geothermal plants cost-competitive in future energy systems. Advances in Applied Energy, 2023, 11: 100148

[230] Morita K, Bollmeier WS, Mizogami H. An experiment to prove the concept of the downhole coaxial heat exchanger (DCHE) in Hawaii. Transactions—Geothermal Resources Council, 1992, 16: 9–16

[231] Faghri A. Heat pipe science and technology. Fuel and Energy Abstracts, 1995, 36(4): 285

[232] DunnP D, Reay D A. Heat pipes. 4th ed. Oxford: Pergamon, 1994

RIGHTS & PERMISSIONS

Higher Education Press 2024