Core-membrane microstructured amine-modified mesoporous biochar templated via ZnCl2/KCl for CO2 capture

Chen Zhang , Duoyong Zhang , Xinqi Zhang , Yongqiang Tian , Liwei Wang

Front. Energy ›› 2024, Vol. 18 ›› Issue (6) : 863 -874.

PDF (4634KB)
Front. Energy ›› 2024, Vol. 18 ›› Issue (6) : 863 -874. DOI: 10.1007/s11708-024-0964-2
RESEARCH ARTICLE

Core-membrane microstructured amine-modified mesoporous biochar templated via ZnCl2/KCl for CO2 capture

Author information +
History +
PDF (4634KB)

Abstract

Mesoporous biochar (MC) derived from biomass is synthesized using a dual-salt template method involving ZnCl2 and KCl, followed by impregnation with polyethyleneimine (PEI) of varying average molecular weights under vacuum conditions to construct a core-membrane structure for enhancing carbon capture performance. The resulting MC exhibits a highly intricate network of micropores and abundant mesopores, along with defects in graphitic structures, effectively facilitating robust PEI loading. Among the PEI-modified samples, PEI-600@MC demonstrates the highest CO2 sorption capacity, achieving approximately 3.35 mmol/g at 0.1 MPa and 70 °C, with an amine efficiency of 0.32 mmol CO2/mmol N. The introduction of amine functional groups in PEI significantly enhances the sorption capacity compared to bare MC. Additionally, PEI with lower average molecular weights exhibits a superior sorption performance at low pressures but shows a reduced thermal stability compared to higher molecular weight counterparts. The area of sorption hysteresis loops gradually decreases with increasing temperature and average molecular weight of PEI. The equilibrium sorption isotherms are accurately modeled by the Langmuir equation, revealing a maximum sorption capacity of approximately 3.53 mmol/g at 70 °C and saturation pressure. This work highlights the potential of dual-salts templated biomass-derived MC, modified with PEI, as an effective, widely available, and cost-efficient material for CO2 capture.

Graphical abstract

Keywords

mesoporous biochar (MC) / dual-salt templated / carbon dioxide capture / sorption / polyethyleneimine (PEI)

Cite this article

Download citation ▾
Chen Zhang, Duoyong Zhang, Xinqi Zhang, Yongqiang Tian, Liwei Wang. Core-membrane microstructured amine-modified mesoporous biochar templated via ZnCl2/KCl for CO2 capture. Front. Energy, 2024, 18(6): 863-874 DOI:10.1007/s11708-024-0964-2

登录浏览全文

4963

注册一个新账户 忘记密码

References

[1]

Gür T M. Carbon dioxide emissions, capture, storage and utilization: Review of materials, processes and technologies. Progress in Energy and Combustion Science, 2022, 89: 100965

[2]

Wang Z, Li Z, Liu L. . Green synthesis of polypyrrole for CO2 capture from humid flue gases. Green Chemistry, 2023, 25(4): 1513–1521

[3]

Zhang C, Zhang D, Zhang X. . Rubik’s cube-shaped Linde type A zeolite synthesized from biomass for carbon dioxide capture. Cell Reports. Physical Science, 2024, 5(4): 101889

[4]

Ma Q, Wang S, Fu Y. . China’s policy framework for carbon capture, utilization and storage: Review, analysis, and outlook. Frontiers in Energy, 2023, 17(3): 400–411

[5]

Xie J, Li K, Fan J. . Lifecycle carbon footprint and cost assessment for coal-to-liquid coupled with carbon capture, storage, and utilization technology in China. Frontiers in Energy, 2023, 17(3): 412–427

[6]

Seok Chae Y, Park S, Won Kang D. . Moisture-tolerant diamine-appended metal–organic framework composites for effective indoor CO2 capture through facile spray coating. Chemical Engineering Journal, 2022, 433: 133856

[7]

Lyu H, Chen O I F, Hanikel N. . Carbon dioxide capture chemistry of amino acid functionalized metal-organic frameworks in humid flue gas. Journal of the American Chemical Society, 2022, 144(5): 2387–2396

[8]

Al-Absi A A, Mohamedali M, Domin A. . Development of in situ polymerized amines into mesoporous silica for direct air CO2 capture. Chemical Engineering Journal, 2022, 447: 137465

[9]

Chen H, Dong S, Zhang Y. . A comparative study on energy efficient CO2 capture using amine grafted solid sorbent: Materials characterization, isotherms, kinetics and thermodynamics. Energy, 2022, 239: 122348

[10]

Zhang C, Zhang Y, Su T. . Molecular simulation on carbon dioxide capture performance for carbons doped with various elements. Energy Storage and Saving, 2023, 2(2): 435–441

[11]

Shi L, Hu T, Xie R. . Dual synergistic effect of the amine-functionalized MIL-101@cellulose sorbents for enhanced CO2 capture at ambient temperature. Chemical Engineering Journal, 2024, 481: 148566

[12]

Kumar D R, Rosu C, Sujan A R. . Alkyl-aryl amine-rich molecules for CO2 removal via direct air capture. ACS Sustainable Chemistry & Engineering, 2020, 8(29): 10971–10982

[13]

Gaikwad S, Kim Y, Gaikwad R. . Enhanced CO2 capture capacity of amine-functionalized MOF-177 metal organic framework. Journal of Environmental Chemical Engineering, 2021, 9(4): 105523

[14]

Zhang C, Su T, Zhang X. . Porous core-membrane microstructured nanomaterial composed of deep eutectic solvents and MOF-808 for CO2 capture. ChemSusChem, 2023, 16(24): e202300864

[15]

He Z J, Wang Y Z, Miao Y H. . Mixed polyamines promotes CO2 adsorption from air. Journal of Environmental Chemical Engineering, 2022, 10(2): 107239

[16]

Zhang J, Zuo J, Ai W. . Preparation of mesoporous coal-gasification fine slag adsorbent via amine modification and applications in CO2 capture. Applied Surface Science, 2021, 537: 147938

[17]

Miao Y, He Z, Zhu X. . Operating temperatures affect direct air capture of CO2 in polyamine-loaded mesoporous silica. Chemical Engineering Journal, 2021, 426: 131875

[18]

Min Y J, Ganesan A, Realff M J. . Direct air capture of CO2 using poly(ethyleneimine)-functionalized expanded poly(tetrafluoroethylene)/silica composite structured sorbents. ACS Applied Materials & Interfaces, 2022, 14(36): 40992–41002

[19]

Zhang S, Pan Q, Wang Y. Sunlight-controlled CO2 separation resulting from a biomass-based CO2 absorber. Green Energy & Environment, 2022, 7(3): 566–574

[20]

Zhu X C, Ge T S, Yang F. . Efficient CO2 capture from ambient air with amine-functionalized Mg–Al mixed metal oxides. Journal of Materials Chemistry. A, Materials for Energy and Sustainability, 2020, 8(32): 16421–16428

[21]

Kumar R, Bandyopadhyay M, Pandey M. . Amine-impregnated nanoarchitectonics of mesoporous silica for capturing dry and humid 400 ppm carbon dioxide: A comparative study. Microporous and Mesoporous Materials, 2022, 338: 111956

[22]

Nezam I, Xie J W, Golub K W. . Chemical kinetics of the autoxidation of poly(ethylenimine) in CO2 sorbents. ACS Sustainable Chemistry & Engineering, 2021, 9(25): 8477–8486

[23]

Chen Q, Wang S, Rout K R. . Development of polyethylenimine (PEI)-impregnated mesoporous carbon spheres for low-concentration CO2 capture. Catalysis Today, 2021, 369: 69–76

[24]

Liu Y, Xiao M, Liu S. . A novel oil-water microemulsion strategy for controllable synthesis of large mesoporous carbon nanoparticles. Carbon, 2022, 200: 361–374

[25]

Qiu Y, Zhang C, Zhang R. . Integration of pore structure modulation and B, N co-doping for enhanced capacitance deionization of biomass-derived carbon. Green Energy & Environment, 2023, 8(5): 1488–1500

[26]

Fu J, Shen F, Liu X. . Synthesis of MgO-doped ordered mesoporous carbons by Mg2+-tannin coordination for efficient isomerization of glucose to fructose. Green Energy & Environment, 2023, 8(3): 842–851

[27]

Zhou Q, Di G, Song T. . Template synthesis of sulfur-doped mesoporous carbon for efficiently removing gas-phase elemental mercury from flue gas. Fuel, 2022, 321: 124112

[28]

Luo M, Wang L, Li H. . Hierarchical porous biochar from kelp: Insight into self-template effect and highly efficient removal of methylene blue from water. Bioresource Technology, 2023, 372: 128676

[29]

Park Y M, Kim B G, Gao X. . Ordered mesoporous Co3O4-Al2O3 bimetal oxides for CO2 hydrogenation to synthetic natural gas: Effects of surface Al2O3 distribution. Fuel, 2023, 343: 127943

[30]

Sani S, Liu X, Li M. . Synthesis and characterization of three-dimensional interconnected large-pore mesoporous cellular lignin carbon materials and their potential for CO2 capture. Microporous and Mesoporous Materials, 2023, 347: 112334

[31]

Du H, Ren J, Zhang W. . Ni nanoparticles in situ embedment in 3D ordered macro-/mesoporous carbon framework as efficient microwave absorption and infrared stealth materials. Carbon, 2023, 204: 325–335

[32]

Wang S, Eberhardt T L, Guo D. . Efficient conversion of glucose into 5-HMF catalyzed by lignin-derived mesoporous carbon solid acid in a biphasic system. Renewable Energy, 2022, 190: 1–10

[33]

Xu C Y, Du R, Yu C B. . Glucose-derived micro–mesoporous carbon spheres for high-performance lithium–sulfur batteries. Energy & Fuels, 2023, 37(2): 1318–1326

[34]

Wu C, Liu J, Wu W. . Mild modification of sponge-like carbon: Ammonia post-treatment for enhanced CO2 adsorption and suitability for supercapacitors. Separation and Purification Technology, 2025, 353: 128525

[35]

Wu C, Liu J, Wang Y. . KCl-assisted activation of macadamia nut shell-derived carbon: Unveiling enhanced pore structure, adsorption and supercapacitor performance. Separation and Purification Technology, 2024, 329: 125188

[36]

Liu W, Yang J, Liu S. . Zinc chloride-activated micro-mesoporous carbon material derived from energy grass and its electrocatalytic performance toward oxygen reduction reaction. Journal of Energy Storage, 2022, 46: 103697

[37]

Ma Z, Zhang H, Yang Z. . Highly mesoporous carbons derived from biomass feedstocks templated with eutectic salt ZnCl2/KCl. Journal of Materials Chemistry. A, Materials for Energy and Sustainability, 2014, 2(45): 19324–19329

[38]

Zhang C, Zhang X, Su T. . Modification schemes of efficient sorbents for trace CO2 capture. Renewable & Sustainable Energy Reviews, 2023, 184: 113473

[39]

Xu Z, Zhang X, Yang X. . Synthesis of Fe/N co-doped porous carbon spheres derived from corncob for supercapacitors with high performances. Energy & Fuels, 2021, 35(17): 14157–14168

[40]

Li Z, Deng L, Kinloch I A. . Raman spectroscopy of carbon materials and their composites: Graphene, nanotubes and fibres. Progress in Materials Science, 2023, 135: 101089

[41]

Yu J, Guo M, Muhammad F. . One-pot synthesis of highly ordered nitrogen-containing mesoporous carbon with resorcinol–urea–formaldehyde resin for CO2 capture. Carbon, 2014, 69: 502–514

[42]

Wang J, Chen H, Zhou H. . Carbon dioxide capture using polyethylenimine-loaded mesoporous carbons. Journal of Environmental Sciences, 2013, 25(1): 124–132

[43]

Choi S, Gray M L, Jones C W. Amine-tethered solid adsorbents coupling high adsorption capacity and regenerability for CO2 capture from ambient air. ChemSusChem, 2011, 4(5): 628–635

[44]

Zhang H, Liu R, Xin Y. . Enhancing lignin model compound depolymerization using mediator-enzyme catalysis: A sustainable approach to C–C bond cleavage. ACS Sustainable Chemistry & Engineering, 2024, 12(15): 5842–5849

[45]

Chen M, Yan Z, Luan J. . π-π electron-donor-acceptor (EDA) interaction enhancing adsorption of tetracycline on 3D PPY/CMC aerogels. Chemical Engineering Journal, 2023, 454: 140300

[46]

Walleni C, Malik S B, Missaoui G. . Selective NO2 gas sensors employing nitrogen- and boron-doped and Co-doped reduced graphene oxide. ACS Omega, 2024, 9(11): 13028–13040

[47]

Cui Q, Zhang M, Chen M. . Comparative studies of sulfadiazine sodium degradation performance and mechanisms in the systems of persulfate with and without activation. Chemical Engineering Journal, 2024, 483: 149356

[48]

Wan S, Fang S, Jiang L. . Strong, conductive, foldable graphene sheets by sequential ionic and π bridging. Advanced Materials, 2018, 30(36): 1802733

[49]

Xu J, Lin W, Long J. . Efficient photocatalytic cleavage of C–C bonds in β-1 lignin models and aromatic vicinal diols by combining alkali metal-treated graphitic carbon nitride and persulfate. ACS Sustainable Chemistry & Engineering, 2024, 12(3): 1343–1352

[50]

Wang S, Kong R. Analyzing the flotation kinetics of long-flame coal slurry using water-soluble emulsified collector mixtures. Fuel, 2024, 360: 130572

[51]

Xia X, Liao Z, Deng J. . Efficient purification of low-level uranium-containing wastewater by polyamine/amidoxime synergistically reinforced fiber. Environmental Pollution, 2024, 344: 123269

[52]

Torrisi L, Silipigni L, Cutroneo M. . Graphene oxide as a radiation sensitive material for XPS dosimetry. Vacuum, 2020, 173: 109175

[53]

Dods M N, Weston S C, Long J R. Prospects for simultaneously capturing carbon dioxide and harvesting water from air. Advanced Materials, 2022, 34(38): 2204277

[54]

Sani S, Liu X, Stevens L. . Amine functionalized lignin-based mesoporous cellular carbons for CO2 capture. Fuel, 2023, 351: 128886

[55]

Gibson J A A, Gromov A V, Brandani S. . The effect of pore structure on the CO2 adsorption efficiency of polyamine impregnated porous carbons. Microporous and Mesoporous Materials, 2015, 208: 129–139

[56]

Tang Z, Han Z, Yang G. . Polyethylenimine loaded nanoporous carbon with ultra-large pore volume for CO2 capture. Applied Surface Science, 2013, 277: 47–52

[57]

Chai S H, Liu Z M, Huang K. . Amine functionalization of microsized and nanosized mesoporous carbons for carbon dioxide capture. Industrial & Engineering Chemistry Research, 2016, 55(27): 7355–7361

[58]

Yan H, Zhang G, Liu J. . Investigation of CO2 adsorption performance of amine impregnated adsorbents using amine-support matching strategies. Separation and Purification Technology, 2023, 310: 123178

[59]

Kong W, Liu J. Ordered mesoporous carbon with enhanced porosity to support organic amines: Efficient nanocomposites for the selective capture of CO2. New Journal of Chemistry, 2019, 43(15): 6040–6047

RIGHTS & PERMISSIONS

Higher Education Press 2024

AI Summary AI Mindmap
PDF (4634KB)

Supplementary files

FEP-24036-OF-ZC_suppl_1

1703

Accesses

0

Citation

Detail

Sections
Recommended

AI思维导图

/