New insight into effect of potential on degradation of Fe-N-C catalyst for ORR

Abstract

In recent years, Fe-N-C catalyst is particularly attractive due to its high oxygen reduction reaction (ORR) activity and low cost for proton exchange membrane fuel cells (PEMFCs). However, the durability problems still pose challenge to the application of Fe-N-C catalyst. Although considerable work has been done to investigate the degradation mechanisms of Fe-N-C catalyst, most of them are simply focused on the active-site decay, the carbon oxidation, and the demetalation problems. In fact, the 2e⁻ pathway in the ORR process of Fe-N-C catalyst would result in the formation of H₂O₂, which is proved to be a key degradation source. In this paper, a new insight into the effect of potential on degradation of Fe-N-C catalyst was provided by quantifying the H₂O₂ intermediate. In this case, stability tests were conducted by the potential-static method in O₂ saturated 0.1 mol/L HClO₄. During the tests, H₂O₂ was quantified by rotating ring disk electrode (RRDE). The results show that compared with the loading voltage of 0.4 V, 0.8 V, and 1.0 V, the catalysts being kept at 0.6 V exhibit a highest H₂O₂ yield. It is found that it is the combined effect of electrochemical oxidation and chemical oxidation (by aggressive radicals like H₂O₂/radicals) that triggered the highest H₂O₂ release rate, with the latter as the major cause.

Graphical abstract

Keywords

proton exchange membrane fuel cells (PEMFCs) / oxygen reduction reaction (ORR) / Fe-N-C catalyst / potential / H₂O₂ / degradation

References

[1] Martinez U, Komini Babu S, Holby E F, Progress in the development of Fe-based PGM-free electrocatalysts for the oxygen reduction reaction. Advanced Materials, 2019, 31(31): 1806545

[2] Konnerth H, Matsagar B M, Chen S S, Metal-organic framework (MOF)-derived catalysts for fine chemical production. Coordination Chemistry Reviews, 2020, 416: 213319

[3] Yang L J, Shui J L, Du L, Carbon-based metal-free ORR electrocatalysts for fuel cells: past, present, and future. Advanced Materials, 2019, 31(13): 1804799

[4] Banham D, Ye S Y. Current status and future development of catalyst materials and catalyst layers for proton exchange membrane fuel cells: an industrial perspective. ACS Energy Letters, 2017, 2(3): 629–638

[5] Zhang L, Si R, Liu H, Atomic layer deposited Pt-Ru dual-metal dimers and identifying their active sites for hydrogen evolution reaction. Nature Communications, 2019, 10(1): 4936

[6] Liu M L, Zhao Z P, Duan X F, Nanoscale structure design for high-performance Pt-based ORR catalysts. Advanced Materials, 2019, 31(6): 1802234

[7] Chang Q W, Xu Y, Zhu S Q, Pt-Ni nanourchins as electrocatalysts for oxygen reduction reaction. Frontiers in Energy, 2017, 11(3): 254–259

[8] Guo Y, Tang J, Henzie J, Assembly of hollow mesoporous nanoarchitectures composed of ultrafine Mo₂C nanoparticles on N-doped carbon nanosheets for efficient electrocatalytic reduction of oxygen. Materials Horizons, 2017, 4(6): 1171–1177

[9] Tan H, Li Y, Kim J, Sub-50 nm iron–nitrogen-doped hollow carbon sphere-encapsulated iron carbide nanoparticles as efficient oxygen reduction catalysts. Advancement of Science, 2018, 5(7): 1800120

[10] Tan H, Tang J, Henzie J, Assembly of hollow carbon nanospheres on graphene nanosheets and creation of iron–nitrogen-doped porous carbon for oxygen reduction. ACS Nano, 2018, 12(6): 5674–5683

[11] Cai J J, Zhou Q Y, Liu B, A sponge-templated sandwich-like cobalt-embedded nitrogen-doped carbon polyhedron/graphene composite as a highly efficient catalyst for Zn–air batteries. Nanoscale, 2020, 12(2): 973–982

[12] Zhang X, Chen A, Zhong M, Metal–organic frameworks (MOFs) and MOF-derived materials for energy storage and conversion. Electrochemical Energy Reviews, 2019, 2(1): 29–104

[13] Chueh C C, Chen C I, Su Y A, Harnessing MOF materials in photovoltaic devices: recent advances, challenges, and perspectives. Journal of Materials Chemistry A, Materials for Energy and Sustainability, 2019, 7(29): 17079–17095

[14] Banham D, Choi J Y, Kishimoto T, Integrating PGM-free catalysts into catalyst layers and proton exchange membrane fuel cell devices. Advanced Materials, 2019, 31(31): 1804846

[15] Doustkhah E, Lin J, Rostamnia S, Development of sulfonic-acid-functionalized mesoporous materials: synthesis and catalytic applications. Chemistry (Weinheim an der Bergstrasse, Germany), 2019, 25(7): 1614–1635

[16] Liao Y T, Nguyen V C, Ishiguro N, Engineering a homogeneous alloy-oxide interface derived from metal-organic frameworks for selective oxidation of 5-hydroxymethylfurfural to 2,5-furandicarboxylic acid. Applied Catalysis B: Environmental, 2020, 270: 118805

[17] Xia W, Tang J, Li J, Defect-rich graphene nanomesh produced by thermal exfoliation of metal–organic frameworks for the oxygen reduction reaction. Angewandte Chemie International Edition, 2019, 58(38): 13354–13359

[18] Jasinski R. New fuel cell cathode catalyst. Nature, 1964, 201(4925): 1212–1213

[19] Jahnke H, Schönborn M, Zimmermann G. Organic dyestuffs as catalysts for fuel cells. In: Schäfer F P, eds. Physical and Chemical Applications of Dyestuffs. Berlin, Heidelberg: Springer, 1976, 61

[20] Lefèvre M, Proietti E, Jaouen F, Iron-based catalysts with improved oxygen reduction activity in polymer electrolyte fuel cells. Science, 2009, 324(5923): 71–74

[21] Yarlagadda V, Carpenter M K, Moylan T E, Boosting fuel cell performance with accessible carbon mesopores. ACS Energy Letters, 2018, 3(3): 618–621

[22] Cheng N, Zhang L, Doyle-Davis K, Single-atom catalysts: from design to application. Electrochemical Energy Reviews, 2019, 2: 539–573

[23] Shao Y Y, Dodelet J P, Wu G, PGM-free cathode catalysts for PEM fuel cells: a mini-review on stability challenges. Advanced Materials, 2019, 31(31): 1807615

[24] Lefevre M, Dodelet J P. Fe-based catalysts for the reduction of oxygen in polymer electrolyte membrane fuel cell conditions: determination of the amount of peroxide released during electroreduction and its influence on the stability of the catalysts. Electrochimica Acta, 2003, 48: 2749–2760

[25] Artyushkova K, Serov A, Rojas-Carbonell S, Chemistry of multitudinous active sites for oxygen reduction reaction in transition metal-nitrogen-carbon electrocatalysts. Journal of Physical Chemistry C, 2015, 119(46): 25917–25928

[26] Muthukrishnan A, Nabae Y, Okajima T, Kinetic approach to investigate the mechanistic pathways of oxygen reduction reaction on Fe-containing N-doped carbon catalysts. ACS Catalysis, 2015, 5(9): 5194–5202

[27] Zheng W, Wang L, Deng F, Durable and self-hydrating tungsten carbide-based composite polymer electrolyte membrane fuel cells. Nature Communications, 2017, 8(1): 418

[28] Choi C H, Lim H K, Chung M W, The Achilles’ heel of iron-based catalysts during oxygen reduction in an acidic medium. Energy & Environmental Science, 2018, 11(11): 3176–3182

[29] Goellner V, Armel V, Zitolo A, Degradation by hydrogen peroxide of metal-nitrogen-carbon catalysts for oxygen reduction. Journal of the Electrochemical Society, 2015, 162(6): H403–H414

[30] Kumar K, Dubau L, Mermoux M, On the influence of oxygen on the degradation of Fe-N-C catalysts. Angewandte Chemie International Edition, 2020, 59(8): 3235–3243

[31] Kusoglu A, Weber A Z. New insights into perfluorinated sulfonic-acid ionomers. Chemical Reviews, 2017, 117(3): 987–1104

[32] Yang L M, Bai Y Z, Zhang H J, Nitrogen-doped porous carbon derived from Fe-MIL nanocrystals as an electrocatalyst for efficient oxygen reduction. RSC Advances, 2017, 7(36): 22610–22618

[33] Abe H, Hirai Y, Ikeda S, Fe azaphthalocyanine unimolecular layers (Fe AzULs) on carbon nanotubes for realizing highly active oxygen reduction reaction (ORR) catalytic electrodes. NPG Asia Materials, 2019, 11(1): 57

[34] Ma R, Lin G, Zhou Y, A review of oxygen reduction mechanisms for metal-free carbon-based electrocatalysts. npj Computational Materials, 2019, 5: 78

[35] Wang W, Jia Q Y, Mukerjee S, Recent insights into the oxygen-reduction electrocatalysis of Fe/N/C materials. ACS Catalysis, 2019, 9(11): 10126–10141

[36] Lu Z Y, Chen G X, Siahrostami S, High-efficiency oxygen reduction to hydrogen peroxide catalysed by oxidized carbon materials. Nature Catalysis, 2018, 1(2): 156–162

[37] Macauley N, Papadias D D, Fairweather J, Carbon corrosion in PEM fuel cells and the development of accelerated stress tests. Journal of the Electrochemical Society, 2018, 165(6): F3148–F3160

[38] Chen L N, Yu W S, Wang T, Fluorescence detection of hydroxyl radical generated from oxygen reduction on Fe/N/C catalyst. Science China. Chemistry, 2020, 63(2): 198–202

[39] Choi C H, Baldizzone C, Grote J P, Stability of Fe-N-C catalysts in acidic medium studied by operando Spectroscopy. Angewandte Chemie International Edition, 2015, 54(43): 12753–12757

[40] Choi C H, Choi W S, Kasian O, Unraveling the nature of sites active toward hydrogen peroxide reduction in Fe-N-C catalysts. Angewandte Chemie International Edition, 2017, 56(30): 8809–8812

[41] Cai R, Abdellaoui S, Kitt J P, Confocal raman microscopy for the determination of protein and quaternary ammonium ion loadings in biocatalytic membranes for electrochemical energy conversion and storage. Analytical Chemistry, 2017, 89(24): 13290–13298

[42] Li J, Zhang H, Samarakoon W, Thermally driven structure and performance evolution of atomically dispersed FeN₄ sites for oxygen reduction. Angewandte Chemie International Edition, 2019, 58(52): 18971–18980

[43] Ren G Y, Gao L L, Teng C, Ancient chemistry ‘Pharaoh’s Snakes’ for efficient Fe-/N-doped carbon electrocatalysts. ACS Applied Materials & Interfaces, 2018, 10(13): 10778–10785

RIGHTS & PERMISSIONS

Higher Education Press