3D structural modeling integrated with seismic attribute and petrophysical evaluation for hydrocarbon prospecting at the Dhulian Oilfield, Pakistan

Abstract

Surface and deep subsurface geological structural trends, stratigraphic features, and reservoir charac-teristics play important roles in assessment of hydrocarbon potential. Here, an approach that integrates digital elevation modelling, seismic interpretation, seismic attributes, three-dimensional (3D) geological structural modeling predicated on seismic data interpretation, and petrophysical analysis is presented to visualize and analyze reservoir structural trends and determine residual hydrocarbon potential. The digital elevation model is utilized to provide verifiable predictions of the Dhulian surface structure. Seismic interpretation of synthetic seismograms use two-way time and depth contour models to perform a representative 3D reservoir geological structure evaluation. Based on Petrel structural modeling efficiency, reservoir development indexes, such as the true 3D structural trends, slope, geometry type, depth, and possibility of hydrocarbon prospects, were calculated for the Eocene limestone Chorgali, upper Paleocene limestone Lockhart, early Permian arkosic sandstone Warcha, and Precambrian Salt Range formations. Trace envelope, instantaneous frequency, and average energy attribute analyses were utilized to resolve the spatial predictions of the subsurface structure, formation extrusion, and reflector continuity. We evaluated the average porosity, permeability, net to gross ratio, water saturation, and hydrocarbon saturation of early Eocene limestone and upper Paleocene limestone based on the qualitative interpretation of well log data. In summary, this integrated study validates 3D stratigraphic structural trends and fault networks, facilitates the residual hydrocarbon potential estimates, and reveals that the Dhulian area has a NE to SW (fold axis) thrust-bounded salt cored anticline structure, which substantiates the presence of tectonic compression. The thrust faults have fold axes trending from ENE to WSW, and the petrophysical analysis shows that the mapped reservoir is of good quality and has essential hydrocarbon potential, which can be exploited economically.

Graphical abstract

Keywords

surface model / seismic interpretation / subsurface structural model / attributes / hydrocarbon potential

References

[1] Aamir M, Siddiqui M M (2006). Interpretation and visualization of thrust sheets in a triangle zone in eastern Potwar, Pakistan. Leading Edge (Tulsa Okla), 25(1): 24–37

[2] Adeoye T, Enikanselu P (2009). Hydrocarbon reservoir mapping and volumetric analysis using seismic and borehole data over “Extreme”field, southwestern Niger Delta. Ozean J Appl Sci, 2(4): 429–441

[3] Aguilera R F, Aguilera R (2004). A triple porosity model for petrophysical analysis of naturally fractured reservoirs. Petrophys, 45(02): 157–166

[4] Ameloko A, Owoseni A (2015). Hydrocarbon reservoir evaluation of X-field, Niger Delta using seismic and petrophysical data. Inter J Innov Scient Res, 15(1): 193–201

[5] Archie G E (1942). The electrical resistivity log as an aid in determining some reservoir characteristics. Transact AIME, 146(01): 54–62

[6] Asquith G, Krygowski D (2004). AAPG Methods in Exploration, No. 16, Chapter 7: Log Interpretation

[7] Awais M, Hanif M, Khan M Y, Jan I U, Ishaq M (2019). Relating petrophysical parameters to petrographic interpretations in carbonates of the Chorgali Formation, Potwar Plateau, Pakistan. Carbonates Evaporites, 34(3): 581–595

[8] Baker D M, Lillie R J, Yeats R S, Johnson G D, Yousuf M, Zamin A S H (1988). Development of the Himalayan frontal thrust zone: Salt Range, Pakistan. Geology, 16(1): 3–7

[9] Barnes A E (1991). Instantaneous frequency and amplitude at the envelope peak of a constant-phase wavelet. Geophys, 56(7): 1058–1060

[10] Bitrus P R, Iacopini D, Bond C E (2016). Defining the 3D geometry of thin shale units in the Sleipner reservoir using seismic attributes. Mar Pet Geol, 78: 405–425

[11] Blythe A, Burbank D, Farley K, Fielding E (2000). Structural and topographic evolution of the central Transverse Ranges, California, from apatite fissiontrack,(U–Th)/He and digital elevation model analyses. Basin Res, 12(2): 97–114

[12] Burrough P A, McDonnell R, McDonnell R A, Lloyd C D 2015. Principles of Geographical Information Systems. Oxford: Oxford University Press

[13] Butler R W, Coward M P, Harwood G M, Knipe R J (1987). Salt control on thrust geometry, structural style and gravitational collapse along the Himalayan mountain front in the Salt Range of northern Pakistan. In: Lerche, J.J. O’Brien, eds. Dynamical Geology of Salt and Related Structures. New York: Elsevier: 339–418

[14] Chen N, Ni N, Kapp P, Chen J, Xiao A, Li H (2015). Structural analysis of the Hero Range in the Qaidam Basin, northwestern China, using integrated UAV, terrestrial LiDAR, Landsat 8, and 3-D seismic data. IEEE J Sel Top Appl Earth Obs Remote Sens, 8(9): 4581–4591

[15] Chen Q, Sidney S (1997). Seismic attribute technology for reservoir forecasting and monitoring. Leading Edge (Tulsa Okla), 16(5): 445–448 (J)

[16] Dowd P (1994). Geological controls in the geostatistical simulation of hydrocarbon reservoirs. Arabian J Sci Eng, 19(2B): 237–247

[17] Ehsan M, Gu H, Ahmad Z, Akhtar M M, Abbasi S S (2019). A modified approach for volumetric evaluation of shaly sand formations from conventional well logs: a case study from the Talhar Shale, Pakistan. Arab J Sci Eng, 44(1): 417–428

[18] Ehsan M, Gu H (2020). An integrated approach for the identification of lithofacies and clay mineralogy through Neuro-Fuzzy, cross plot, and statistical analyses, from well log data. J Earth Syst Sci, 129(1): 101–113

[19] Everett J R, Jengo C, Staskowski R (2002). Remote sensing and GIS enable future exploration success. World oil, 223(11): 59–65

[20] Fagin S W (1991). Seismic Modeling of Geologic Structures: Applications to Exploration Problems. Soc Explor Geophys

[21] Fajana A O, Ayuk M A, Enikanselu P A, Oyebamiji A R (2019). Seismic interpretation and petrophysical analysis for hydrocarbon resource evaluation of ‘Pennay’field, Niger Delta. J Pet Explor Prod Technol, 9(2): 1025–1040

[22] Fazeelat T, Jalees M, Bianchi T (2010). Source rock potential of Eocene, Paleocene and Jurassic deposits in the subsurface of the Potwar Basin, northern Pakistan. J Pet Geol, 33(1): 87–96

[23] Gee E, Gee D (1989). Overview of the geology and structure of the Salt Range, with observations on related areas of northern Pakistan. Geol Soc America Sps, 232: 95–112

[24] Grelaud S, Sassi W, de Lamotte D F, Jaswal T, Roure F (2002). Kinematics of eastern Salt Range and South Potwar basin (Pakistan): a new scenario. Mar Pet Geol, 19(9): 1127–1139

[25] Guo J, Wei X, Long G, Wang B, Fan H, Xu S (2017). Three-dimensional structural model of the Qaidam basin: Implications for crustal shortening and growth of the northeast Tibet. Open Geosci, 9(1): 174–185

[26] Guo J, Wu L, Zhou W, Li C, Li F (2018). Section-constrained local geological interface dynamic updating method based on the HRBF surface. J Struct Geol, 107: 64–72

[27] Hart B S, Balch R S (2000). Approaches to defining reservoir physical properties from 3-D seismic attributes with limited well control: an example from the Jurassic Smackover Formation, Alabama. Geophysics, 65(2): 368–376

[28] Hesthammer J, Fossen H (1997). Seismic attribute analysis in structural interpretation of the Gullfaks Field, northern North Sea. Petrol Geosci, 3(1): 13–26

[29] Houlding SW (1994). 3D Geoscience Modeling: Computer Techniques for Geological Characterization. New York: Springer Verlag

[30] Ishak M A, Islam M, Shalaby M R, Hasan N (2018). The application of seismic attributes and wheeler transformations for the geomorphological interpretation of stratigraphic surfaces: a case study of the F3 block, Dutch offshore sector, North Sea. Geosciences (Basel), 8(3): 79

[31] Jaboyedoff M, Couture R, Locat P (2009). Structural analysis of Turtle Mountain (Alberta) using digital elevation model: toward a progressive failure. Geomorph, 103(1): 5–16

[32] Jadoon I A K, Hinderer M, Wazir B, Yousaf R, Bahadar S, Hassan M, Abbasi Z H,Jadoon S (2015). Structural styles, hydrocarbon prospects, and potential in the Salt Range and Potwar Plateau, north Pakistan. Arab J Geosci, 8(7): 5111–5125

[33] Jaswal T M, Lillie R J, Lawrence R D (1997). Structure and evolution of the northern Potwar deformed zone, Pakistan. AAPG Bull, 81(2): 308–328

[34] Kadri I B (1995). Petroleum Geology of Pakistan. Islamabad: Pakistan Petroleum Limited

[35] Kazmi A H, Rana R A (1982). Tectonic Map of Pakistan 1: 2000000. Islamabad: Elite Print

[36] Kemal A (1991). Geology and new trends for petroleum exploration in Pakistan. In: Ahmed G, Kemal A, Zaman A S H, Humayon M, eds. New Directions and Strategies for Accelerating Petroleum Exploration and Production in Pakistan. Islamabad: Ministry of Petroleum and Natural Resources: 16–57

[37] Khan M, Ahmed R, Raza H A, Kemal A (1986). Geology of petroleum in Kohat-Potwar depression, Pakistan. AAPG Bull, 70(4): 396–414

[38] Khan M, Liu Y, Farid A, Owais M (2018). Characterizing seismo-stratigraphic and structural framework of late cretaceous-recent succession of offshore Indus Pakistan. Open Geosci, 10(1): 174–191

[39] Khan M Y, Akhter M G, Ahmad Z (2013). Applying gamma-ray logs to a carbonate reservoir: a Pakistan Potwar basin example. Oil Gas J, 111(11): 68–73

[40] Lajaunie C, Courrioux G, Manuel L (1997). Foliation fields and 3D cartography in geology: principles of a method based on potential interpolation. Math Geol, 29(4): 571–584

[41] Mallet J L (2002). Geomodeling. Oxford: Oxford University Press

[42] Mehmood W, Aadil N, Jadoon Y (2016). 3-D Structural modeling of Meyal Field, Potwar Sub-basin, Pakistan using seismic and well data. Nucleus, 53(1): 26–32

[43] Moghal M A, Saqi M I, Hameed A, Bugti M N (2007). Subsurface geometry of Potwar sub-basin in relation to structuration and entrapment. Pakistan J Hydrocarbon Res, 17: 61–72

[44] Muni C, Chaudhry M N, Pervaiz K, Qayyum M, Ahmed R (1990). Geology and structure of Kuza Gali-Dunga Gali-Ayubia area, Hazara-Potwar basin with a reference to hydrocarbon prospects of Attock-Hazara fold and thrust belt. Pakistan J Hydrocarbon Res, 2(2): 43–55

[45] Nanda N C (2016). Seismic Data Interpretation and Evaluation for Hydrocarbon Exploration and Production: A Practitioner’S Guide. New York: Springer

[46] Ngui J Q, Hermana M, Ghosh D, Wan Yusof W I. (2018). Integrated study of lithofacies identification—a case study in X Field, Sabah, Malaysia. Geosciences (Basel), 8(2): 75

[47] Riaz M, Nuno P, Zafar T, Ghazi S (2019). 2D seismic interpretation of the Meyal Area, Northern Potwar deform zone, Potwar Basin, Pakistan. Open Geosci, 11(1): 1–16

[48] Shah S B A, Abdullah W H (2016). Petrophysical properties and hydrocarbon potentiality of Balkassar well 7 in Balkassar oilfield, Potwar Plateau, Pakistan, Bull Geol Soc Malaysia, 62:73–77

[49] Shah S B A, Abdullah W H (2017). Structural interpretation and hydrocarbon potential of Balkassar oil field, eastern Potwar, Pakistan, using seismic 2D data and petrophysical analysis. J Geol Soc India, 90(3): 323–328

[50] Silva C L, Morales N, Crósta A P, Costa S S, Jiménez-Rueda J R (2007). Analysis of tectonic-controlled fluvial morphology and sedimentary processes of the western Amazon Basin: an approach using satellite images and digital elevation model. An Acad Bras Cienc, 79(4): 693–711

[51] Stewart S (1999). Seismic interpretation of circular geological structures. Petrol Geosci, 5(3): 273–285

[52] Szabó N P (2011). Shale volume estimation based on the factor analysis of well-logging data. Acta Geophysica, 59(5): 935–953

[53] Taner M T (2001). Seismic attributes. CSEG Rec, 26(7): 49–56

[54] Wandrey C J, Law B, Shah H A 2004. Patala-Nammal composite total petroleum system, Kohat-Potwar geologic province, Pakistan. Washington DC: US Department of the Interior, US Geological Survey Reston

[55] Wang L, Wu X, Zhang B, Li X, Huang A, Meng F, Dai P (2019). Recognition of significant surface soil geochemical anomalies via weighted 3d shortest-distance field of subsurface orebodies: a case study in the Hongtoushan Copper Mine, NE China. Nat Resour Res, 28(3): 587–607

[56] Wang Z, Gao J, Lei X, Cui X, Wang D (2016). Application of 3D seismic attributes to optimize the placement of horizontal wells within a tight gas sand reservoir, Ordos Basin, China. Geophysics, 81(3): B77–B86

[57] Wellmann J F, De La Varga M, Murdie R E, Gessner K, Jessell M (2018). Uncertainty estimation for a geological model of the Sandstone greenstone belt, Western Australia–insights from integrated geological and geophysical inversion in a Bayesian inference framework. Geol Soc Lond Spec Publ, 453(1): 41–56

[58] Wu Q, Xu H, Zou X (2005). An effective method for 3D geological modeling with multi-source data integration. Comput Geosci, 31(1): 35–43 (J)

[59] Zhang B, Chen Y, Huang A, Lu H, Cheng Q (2018). Geochemical field and its roles on the 3D prediction of concealed ore-bodies. Acta Petrol Sin, 34(2): 352–362

RIGHTS & PERMISSIONS

Higher Education Press