Lithium manganese iron phosphate (LiMn_1-yFe_yPO₄) rechargeable batteries: bridging material innovation with practical cell design

Abstract

The growing demand for high-energy storage, rapid power delivery, and excellent safety in contemporary Li-ion rechargeable batteries (LIBs) has driven extensive research into lithium manganese iron phosphates (LiMn_1-yFe_yPO₄, LMFP) as promising cathode materials. The strong P-O covalent bonds in the olivine structure of LMFP ensure exceptional thermal and structural stability compared to conventional layered LiNi_1-y-zCo_yMn_zO₂ (NCM). In addition, the relatively low energy density of LiFePO₄ (LFP), which is isostructural to LMFP, has been significantly increased by the incorporation of Mn redox reactions with a strong reducing tendency. This widespread recognition has advanced our understanding of the physicochemical characteristics of LMFP, which are closely related to its chemical compositions, particle morphology, synthesis processes, and cycling conditions. Despite notable progress in improving the structural integrity and electrochemical superiority of LMFP, most academic research has focused on LMFP/lithium metal half-cell systems. However, practical applications of LIBs require more intricate system configurations involving non-Li anode materials, such as graphite and Li₄Ti₅O₁₂ (LTO). This comprehensive review explores key electrochemical phenomena in LMFP/graphite and LMFP/LTO full cells under both standard and elevated temperatures. Additionally, it offers insights into optimal cell design strategies and practical technologies aimed at achieving a well-balanced combination of energy density, thermal stability, and cost-effectiveness. These advancements position LMFP-based rechargeable batteries as a promising solution for next-generation energy storage systems.

Keywords

Lithium manganese iron phosphates / graphite / lithium titanate / cell design optimization / practical technologies / lithium-ion rechargeable batteries

References

[1] Winter M,Xu K.Before Li ion batteries.Chem Rev2018;118:11433-56

[2] Goodenough JB.The Li-ion rechargeable battery: a perspective.J Am Chem Soc2013;135:1167-76

[3] Zhang B,Wang S.High-energy-density lithium manganese iron phosphate for lithium-ion batteries: progresses, challenges, and prospects.J Energy Chem2025;100:1-17

[4] Chung SY,Chiang YM.Electronically conductive phospho-olivines as lithium storage electrodes.Nat Mater2002;1:123-8

[5] Qiu Z,Mu Y.Modification strategies for enhancing the performance of lithium manganese iron phosphate cathodes in lithium-ion batteries.Chem Methods2025;2400065

[6] Nekahi A,Li X,Zaghib K.Sustainable LiFePO₄ and LiMn_xFe_1-xPO₄ (x=0.1-1) cathode materials for lithium-ion batteries: a systematic review from mine to chassis.Mater Sci Eng R2024;159:100797

[7] Yang L,Xu W.Olivine LiMn_xFe_1-xPO₄ cathode materials for lithium ion batteries: restricted factors of rate performances.J Mater Chem A2021;9:14214-32

[8] Shiozaki M,Hirayama Y,Kanamura K.Blending lithium nickel manganese cobalt oxide with lithium iron manganese phosphate as cathode materials for lithium-ion batteries with enhanced electrochemical performance.Electrochemistry2023;91:077007

[9] Kobayashi G,Nishimura SI.Shift of redox potential and kinetics in Li_x(Mn_yFe_1-y)PO₄.J Power Sources2009;189:397-401

[10] Yamada A,Liu KY.Phase diagram of Li_x(Mn_yFe_1-y)PO₄ (0 ≤ x, y ≤ 1).J Electrochem Soc2001;148:A1153

[11] Loftager S,Vegge T.Density functional theory study of redox potential shifts in Li_xMn_yFe_1-yPO₄ battery electrodes.J Phys Chem C2019;123:102-9

[12] Di Lecce D,Scarpellini A,Hassoun J.A high voltage olivine cathode for application in lithium-ion batteries.ChemSusChem2016;9:223-30

[13] Sun YK,Park HK.Micrometer-sized, nanoporous, high-volumetric-capacity LiMn_0.85Fe_0.15PO₄ cathode material for rechargeable lithium-ion batteries.Adv Mater2011;23:5050-4

[14] Xu E,Lyv W.Optimizing the electrochemical performance of olivine LiMn_xFe_1-xPO₄ cathode materials: ongoing progresses and challenges.Ind Eng Chem Res2024;63:9631-60

[15] Hu Q,Han G.Revealing the voltage decay of LiMn_0.7Fe_0.3PO₄ cathodes over cycling.Nano Energy2024;123:109422

[16] Li S,Liu Y,He X.Comprehensive understanding of structure transition in LiMn_yFe_1-yPO₄ during delithiation/lithiation.Adv Funct Mater2024;34:2310057

[17] Ravnsbæk DB,Xing W.Engineering the transformation strain in LiMn_yFe_1-yPO₄ olivines for ultrahigh rate battery cathodes.Nano Lett2016;16:2375-80

[18] Zhang Y,Su Z.A novel strategy for preparing nano-sized and high-performance LiMn_xFe_1-xPO₄ cathode materials from discarded LiMn₂O₄ and LiFePO₄.Energy Technol2024;12:2301277

[19] Jiang X,Wang X.Concentration-gradient structural LiFe_0.5Mn_0.5PO₄/C prepared via co-precipitation reaction for advanced lithium-ion batteries.Chemphyschem2024;25:e202300930

[20] Xie L,Ma Y.Microsphere LiMn_0.6Fe_0.4PO₄/C cathode with unique rod-like secondary architecture for high energy lithium ion batteries.Chem Eng J2024;499:156513

[21] Sun K,Wang G.Fine structure and electrochemical performance investigations of spherical LiMn_0.6Fe_0.4PO₄/C cathode material synthesized via a spray-drying route at various calcination temperatures.Langmuir2024;40:16571-81

[22] Yao M,Chen JA.Mn-rich induced alteration on band gap and cycling stability properties of LiMn_xFe_1-xPO₄ cathode materials.ACS Appl Mater Interfaces2024;16:66077-88

[23] Zoller F,Luxa J.Freestanding LiFe_0.2Mn_0.8PO₄/rGO nanocomposites as high energy density fast charging cathodes for lithium-ion batteries.Mater Today Energy2020;16:100416

[24] Hu Q,Xiao X.Ultrahigh rate capability of manganese based olivine cathodes enabled by interfacial electron transport enhancement.Nano Energy2022;104:107895

[25] Zhang B,Gong Y.[001]-oriented LiMn_0.6Fe_0.4PO₄/C nanorod microspheres contributing high-rate performance to olivine-structured cathode for lithium-ion battery.Mater Today Energy2022;30:101162

[26] Peng L,Fang Z.General facet-controlled synthesis of single-crystalline {010}-oriented LiMPO₄ (M = Mn, Fe, Co) nanosheets.Chem Mater2017;29:10526-33

[27] Hwang W,Kim S.Unveiling olivine cathodes for high energy-density lithium-ion batteries: a comprehensive review from the atomic level to the electrode scale.J Mater Chem A2024;12:27800-24

[28] Deng Y,Zou K,Zhao Z.Recent advances of Mn-rich LiFe_1-yMn_yPO₄ (0.5 ≤ y < 1.0) cathode materials for high energy density lithium ion batteries.Adv Energy Mater2017;7:1601958

[29] Sun K,Du N,Yan S.Research progress of lithium manganese iron phosphate cathode materials: from preparation to modification.Electroanalysis2024;36:e202400120

[30] Balogun MS,Luo Y.A review of the development of full cell lithium-ion batteries: the impact of nanostructured anode materials.Nano Res2016;9:2823-51

[31] Martha SK,Haik O.LiMn_0.8Fe_0.2PO₄: an advanced cathode material for rechargeable lithium batteries.Angew Chem Int Ed2009;48:8559-63

[32] Guéguen A,Dedryvère R.The electrode/electrolyte reactivity of LiFe_0.33Mn_0.67PO₄ compared to LiFePO₄.J Electrochem Soc2013;160:A387-93

[33] Starke B,Schulz M.Gas evolution and capacity fading in LiFe_xMn_1-xPO₄/graphite cells studied by neutron imaging and neutron induced prompt gamma activation analysis.J Electrochem Soc2017;164:A3943-8

[34] Oh SM,Park JB,Amine K.Double-structured LiMn_0.85Fe_0.15PO₄ coordinated with LiFePO₄ for rechargeable lithium batteries.Angew Chem Int Ed2012;51:1853-6

[35] Theivanayagam MG,Ziebarth R.Improvement in hydrophobicity of olivine lithium manganese iron phosphate cathodes by SiF₄ treatment for lithium-ion batteries.Solid State Ion2015;281:82-8

[36] Ehteshami N,de Meatza I,Paillard E.Adiponitrile-based electrolytes for high voltage, graphite-based Li-ion battery.J Power Sources2018;397:52-8

[37] Lv Z,Lin J.First-principles study on LiMn_0.5Fe_0.5PO₄ doping to decrease the Jahn-Teller effect.J Solid State Electrochem2024;28:577-87

[38] Li Z,Zhu Z.Surface iron concentration gradient: a strategy to suppress Mn³⁺ Jahn-Teller effect in lithium manganese iron phosphate.Appl Surf Sci2025;682:161689

[39] Zhao X,Sun J.LiNi_0.5Co_0.2Mn_0.3O₂-LiMn_0.6Fe_0.4PO₄ mixture with both excellent electrochemical performance and low cost as cathode material for power lithium ion batteries.J Electrochem Soc2018;165:A142-8

[40] Lei P,Xiong Y.Capacity degradation prediction model of LiMn_0.6Fe_0.4PO₄/LiNi_0.5Co_0.2Mn_0.3O₂ composite cathode materials for lithium-ion batteries.Ionics2025;31:217-28

[41] Xiao J,Lei P.A dual kalman filtering algorithm for estimating the SOC of lithium-ion batteries with LiMn_0.6Fe_0.4PO₄/LiNi_0.5Co_0.2Mn_0.3O₂ cathode based on multi-innovation and schmidt orthogonal transformation.J Electrochem Soc2023;170:090514

[42] Wu Y,Shen B.Rich-carbonyl carbon catalysis facilitating the Li₂CO₃ decomposition for cathode lithium compensation agent.Small2024;20:e2311891

[43] Vanaphuti P.Enhancing the Mn redox kinetics of LiMn_0.5Fe_0.5PO₄ cathodes through a synergistic co-doping with niobium and magnesium for lithium-ion batteries.Small2024;20:e2404878

[44] Martha SK,Borgel V.Li₄Ti₅O₁₂/LiMnPO₄ lithium-ion battery systems for load leveling application.J Electrochem Soc2011;158:A790

[45] Xu G,Dong S,Cui G.Li₄Ti₅O₁₂-based energy conversion and storage systems: status and prospects.Coord Chem Rev2017;343:139-84

[46] Borgel V,Hu T,Aurbach D.LiMn_0.8Fe_0.2PO₄/Li₄Ti₅O₁₂, a possible Li-ion battery system for load-leveling application.J Electrochem Soc2013;160:A650-7

[47] Jalkanen K.Entropy change characteristics of LiMn_0.67Fe_0.33PO₄ and Li₄Ti₅O₁₂ electrode materials.J Power Sources2015;273:351-9

[48] Yang J,Guang T.Zero lithium miscibility gap enables high-rate equimolar Li(Mn,Fe)PO₄ solid solution.Nano Lett2021;21:5091-7

[49] Zou QQ,Xia YY.Preparation of carbon-coated LiFe_0.2Mn_0.8PO₄ cathode material and its application in a novel battery with Li₄Ti₅O₁₂ anode.J Power Sources2012;206:222-9

[50] Yang CC,Lin SJ,Shih JY.Preparation of high-rate performance Li₄Ti₅O₁₂/C anode material in Li₄Ti₅O₁₂/LiFe_0.5Mn_0.5PO₄ batteries.Electrochim Acta2014;125:637-45

[51] Li J,Wu J,Liu H.CNT-embedded LiMn_0.8Fe_0.2PO₄/C microsphere cathode with high rate capability and cycling stability for lithium ion batteries.J Alloys Compd2018;731:864-72

[52] Yu M,Ning X.Improving electrochemical performance of LiMn_0.5Fe_0.5PO₄ cathode by hybrid coating of Li₃VO₄ and carbon.Electrochim Acta2021;368:137597

[53] Daigle JC,Asakawa Y.High performance LiMnFePO₄/Li₄Ti₅O₁₂ full cells by functionalized polymeric additives.Mater Adv2021;2:253-60

[54] Yang CC,Lue SJ.Improved electrochemical properties of LiFe_0.5Mn_0.5PO₄/C composite materials via a surface coating process.J Power Sources2016;325:565-74

[55] Hariharan S,Joshi SP.Developing a light weight lithium ion battery - an effective material and electrode design for high performance conversion anodes.RSC Adv2013;3:6386

[56] Hariharan S,Ramar V.A rationally designed dual role anode material for lithium-ion and sodium-ion batteries: case study of eco-friendly Fe₃O₄.Phys Chem Chem Phys2013;15:2945-53

[57] Di Lecce D,Scrosati B.A Gel-polymer Sn-C/LiMn_0.5Fe_0.5PO₄ battery using a fluorine-free salt.ACS Appl Mater Interfaces2015;7:21198-207

[58] Di Lecce D,Hassoun J.New lithium ion batteries exploiting conversion/alloying anode and LiFe_0.25Mn_0.5Co_0.25PO₄ olivine cathode.Electrochim Acta2016;220:384-90

[59] Yu H,Yu J.Relaxing the Jahn-Teller distortion of LiMn_0.6Fe_0.4PO₄ cathodes via Mg/Ni dual-doping for high-rate and long-life Li-ion batteries.J Mater Chem A2024;12:26076-82

[60] Leslie K,Rathore D,Metzger M.Correlating Mn dissolution and capacity fade in LiMn_0.8Fe_0.2PO₄/graphite cells during cycling and storage at elevated temperature.J Electrochem Soc2024;171:040520

[61] Meng Y,Zhang Z,Guo Y.A phytic acid derived LiMn_0.5Fe_0.5PO₄/Carbon composite of high energy density for lithium rechargeable batteries.Sci Rep2019;9:6665 PMCID:PMC6491431

[62] Song Y,Hu T.Dually encapsulated LiMn_0.6Fe_0.4PO₄ architecture with MXenes and amorphous carbon to achieve high-performance and ultra-stable lithium batteries.J Mater Chem A2025;13:2590-9

[63] Hu H,Lei Y.Enhancing the ultra-high rate capability of manganese-based olivine cathode by in situ catalytic growth of graphene carbon layer.J Energy Storage2024;79:110198

[64] Wang Y,Wang Z.LiMn_0.8Fe_0.2PO₄/C nanoparticles via polystyrene template carburizing enhance the rate capability and capacity reversibility of cathode materials.ACS Appl Nano Mater2024;7:4024-34

[65] Han DW,Kim WK.Tailoring crystal structure and morphology of LiFePO₄/C cathode materials synthesized by heterogeneous growth on nanostructured LiFePO₄ seed crystals.ACS Appl Mater Interfaces2013;5:1342-7

[66] Ravnsbæk DB,Xing W.Extended solid solutions and coherent transformations in nanoscale olivine cathodes.Nano Lett2014;14:1484-91

[67] Guo X,Huang X,Liu X.Direct evidence of antisite defects in LiFe_0.5Mn_0.5PO₄ via atomic-level HAADF-EELS.J Mater Chem A2013;1:8775

[68] Amisse R,Hanzel D,Dominko R.Nonstochiometry in LiFe_0.5Mn_0.5PO₄: structural and electrochemical properties.J Electrochem Soc2013;160:A1446-50

[69] Burgos A,Yan D.Off-stoichiometric design of a manganese-rich mixed olivine Li-ion cathode for improved specific energy.Mater Today Energy2024;45:101658

[70] Zhao Q,Tang F.Compatibility between Lithium bis(oxalate)borate-based electrolytes and a LiFe_0.6Mn_0.4PO₄/C cathode for lithium-ion batteries.Energy Technol2017;5:406-13

[71] Ziv B,Aurbach D,Xiao X.Investigation of the reasons for capacity fading in Li-ion battery cells.J Electrochem Soc2014;161:A1672

[72] Liu Y,Huang T.Electrochemically induced interface by LiBOB to enhance cycling performance of LiFe_0.4Mn_0.6PO₄ cathode for lithium-ion batteries.J Power Sources2024;623:235398

[73] Fang G,Yang H,Wu M.Enhanced LiMn_0.8Fe_0.2PO₄ cathode performance enabled by the 1,3,2-dioxathiolane-2,2-dioxide electrolyte additive.J Phys Chem C2024;128:6877-86

[74] Li S,Hu C,Wang L.Potassium 2-thienyl tri-fluoroborate as a functional electrolyte additive enables stable interfaces for Li/LiFe_0.3Mn_0.7PO₄ batteries.J Colloid Interface Sci2023;646:150-8

[75] Jeong SY,Lee H.Thermal characteristics of LiMn_xFe_1-xPO₄ (x = 0, 0.6) cathode materials for safe lithium-ion batteries.J Power Sources2025;626:235755

[76] Park JS,Sun YK.Thermal properties of fully delithiated olivines.J Power Sources2014;256:479-84