The integration of LiNi_0.8Co_0.1Mn_0.1O₂ coatings on separators for elevated battery performance

Abstract

Improving the efficiency and safety of lithium-ion batteries (LIBs) with high-energy cathodes is crucial, yet challenging due to the limitations of commercial separators. Herein, we find that “giving” a portion of the Ni-rich LiNi_0.8Co_0.1Mn_0.1O₂ (NCM811) positive electrode to the Al₂O₃-coated polyethylene (PE) (PE/Al₂O₃) separator as an active and thick ceramic coating (> 10 µm) can more efficiently enhance the separator's wettability and thermal stability compared with the inert and thin (< 5 µm, typically 1~2 µm) Al₂O₃ coating. The NCM811 coating on the separator can take part in the electrochemical reaction and contribute capacity without increasing the cell dead weight. The NCM811-coated separator has a low thermal shrinkage of 0.8% at 160 °C and a high lithium-ion transfer number of 0.66. Notably, the NCM811-coated separator enhances electrochemical performance, delivering higher capacities compared to traditional PE and PE/Al₂O₃ separators. Furthermore, it effectively mitigates lithium dendrite formation, thereby bolstering LIB safety. Our findings demonstrate the potential of using active cathode materials as separator coatings to advance LIB technology with high-energy cathodes.

Keywords

Lithium-ion batteries / separator / NCM811 coating / thermal stability / lithium dendrites

References

[1] Rajaeifar MA,Raugei M,Heidrich O.Challenges and recent developments in supply and value chains of electric vehicle batteries: a sustainability perspective.Resour Conserv Recy2022;180:106144

[2] Zuo W,Zarrabeitia M,Yang Y.Layered oxide cathodes for sodium-ion batteries: storage mechanism, electrochemistry, and techno-economics.ACC Chem Res2023;56:284-96 PMCID:PMC9910041

[3] Murugan M,Elumalai PV.Thermal management system of lithium-ion battery packs for electric vehicles: an insight based on bibliometric study.J Energy Storage2022;52:104723

[4] Khan FMNU,Sayem ASM.Design and optimization of lithium-ion battery as an efficient energy storage device for electric vehicles: a comprehensive review.J Energy Storage2023;71:108033

[5] Chen S,Qiu Y,Chen S.A bibliometric analysis of lithium-ion batteries in electric vehicles.J Energy Storage2023;63:107109

[6] Qiu Y,Lin D,Cao W.Fault diagnosis for lithium-ion battery energy storage systems based on local outlier factor.J Energy Storage2022;55:105470

[7] Liu W,Song F.A double transition metal Ti₂NbC₂T_x MXene for enhanced lithium-ion storage.Rare Met2023;42:100-10

[8] Nian Q,Liu S,Ren X.Issues and opportunities on low-temperature aqueous batteries.Chem Eng J2021;423:130253

[9] Jyoti J,Tripathi SK.Recent advancements in development of different cathode materials for rechargeable lithium ion batteries.J Energy Storage2021;43:103112

[10] Zhao S,Yan K.Towards high-energy-density lithium-ion batteries: strategies for developing high-capacity lithium-rich cathode materials.Energy Storage Mater2021;34:716-34

[11] Chu B,Shi JL.Cobalt in high-energy-density layered cathode materials for lithium ion batteries.J Power Sources2022;544:231873

[12] Teng J,Li H,Zhao D.Al-Li alloys as bifunctional sacrificial lithium sources for prelithiation of high-energy-density Li-ion batteries.J Power Sources2022;540:231642

[13] Zhang X,King S.Tunable porous electrode architectures for enhanced Li-ion storage kinetics in thick electrodes.Nano Lett2021;21:5896-904

[14] Chang JH,Kim I.Binder migration: frequently observed yet overlooked phenomena in electrode processing for lithium-ion batteries.J Energy Storage2024;83:110729

[15] Ogihara N,Sasaki T.Impedance spectroscopy characterization of porous electrodes under different electrode thickness using a symmetric cell for high-performance lithium-ion batteries.J Phys Chem C2015;119:4612-9

[16] Wang J,Gao X.Toward high areal energy and power density electrode for Li-ion batteries via optimized 3D printing approach.ACS Appl Mater Interfaces2018;10:39794-801

[17] Liu Z,Hu Q.Safer lithium-ion batteries from the separator aspect: development and future perspectives.Energy Environ Mater2021;4:336-62

[18] Huang Z,Han Q.Vapor-induced phase inversion of poly (m-phenylene isophthalamide) modified polyethylene separator for high-performance lithium-ion batteries.Chem Eng J2022;429:132429

[19] Yu B,Jin X,Chen L.Heat-resistant lithium-ion-battery separator using synchronous thermal stabilization/imidization.ACS Appl Polym Mater2024;6:2464-73

[20] Lagadec MF,Wood V.Characterization and performance evaluation of lithium-ion battery separators.Nat Energy2019;4:16-25

[21] Deng J,Yang X.Cross-linked cellulose/carboxylated polyimide nanofiber separator for lithium-ion battery application.Chem Eng J2022;433:133934

[22] Min Y,Wei G,Zhang B.Enhancing the safety and cyclic performance of lithium-ion batteries using heat resistant and wettable separator based on covalent organic framework and polybenzimidazole.Chem Eng J2022;443:136480

[23] Zhong S,Guang Z.Recent progress in thin separators for upgraded lithium ion batteries.Energy Storage Mater2021;41:805-41

[24] Long MC,Gao Y,Wu G.Boosting safety and performance of lithium-ion battery enabled by cooperation of thermotolerant fire-retardant composite membrane and nonflammable electrolyte.Chem Eng J2022;432:134394

[25] Yu Y,Zhao L.Flexible and heat-resistant polyphenylene sulfide ultrafine fiber hybrid separators for high-safety lithium-ion batteries.Chem Eng J2023;452:139112

[26] Babiker DMD,Wan C,Chen X.Recent progress of composite polyethylene separators for lithium/sodium batteries.J Power Sources2023;564:232853

[27] Han C,Zhang S.Separator with nitrogen-phosphorus flame-retardant for LiNi_xCo_yMn_1-x-yO₂ cathode-based lithium-ion batteries.Small2023;19:e2207453

[28] Nitou MVM,Niu Y.Separator with active coating for fast and stable Li-ion batteries.J Power Sources2024;602:234406

[29] Dong G,Kong L.Neoteric polyimide nanofiber encapsulated by the TiO₂ armor as the tough, highly wettable, and flame-retardant separator for advanced lithium-ion batteries.ACS Sustain Chem Eng2019;7:17643-52

[30] Ding L,Wu T.Effect of temperature on compression behavior of polypropylene separator used for Lithium-ion battery.J Power Sources2020;466:228300

[31] Lu Z,Miao YE.Polyimide separators for rechargeable batteries.J Energy Chem2021;58:170-97

[32] Lingappan N,Passerini S.A comprehensive review of separator membranes in lithium-ion batteries.Renew Sustain Energy Rev2023;187:113726

[33] Parikh D,Thapaliya BP.Al₂O₃/TiO₂ coated separators: roll-to-roll processing and implications for improved battery safety and performance.J Power Sources2021;507:230259

[34] Wu S,Jiang F,Huang F.Ceramic nanoparticle-decorated melt-electrospun PVDF nanofiber membrane with enhanced performance as a lithium-ion battery separator.ACS Omega2019;4:16309-17 PMCID:PMC6787888

[35] Wang W,Wang J.Enhanced electrochemical and safety performance of lithium metal batteries enabled by the atom layer deposition on PVDF-HFP separator.ACS Appl Energy Mater2019;2:4167-74

[36] Valverde A,Silva MM.Metal-organic framework based PVDF separators for high rate cycling lithium-ion batteries.ACS Appl Energy Mater2020;3:11907-19

[37] Babiker DMD,Mansoor B.Superior lithium battery separator with extraordinary electrochemical performance and thermal stability based on hybrid UHMWPE/SiO₂ nanocomposites via the scalable biaxial stretching process.Compos Part B Eng2021;211:108658

[38] Park J,Yun J.Ultra-thin SiO₂ nanoparticle layered separators by a surface multi-functionalization strategy for Li-metal batteries: highly enhanced Li-dendrite resistance and thermal properties.Energy Storage Mater2024;65:103135

[39] Feng G,Mi L,Feng X.Polypropylene/hydrophobic-silica-aerogel-composite separator induced enhanced safety and low polarization for lithium-ion batteries.J Power Sources2018;376:177-83

[40] Zhang SS,Wang C.Preventing lithium dendrite-related electrical shorting in rechargeable batteries by coating separator with a Li-killing additive.J Mater Chem A2018;6:10755-60

[41] Hyun DE,Kim TW.Multi-functional Al₂O₃-coated separators for high-performance lithium-ion batteries: critical effects of particle shape.Ceram Int2023;49:30147-55

[42] Khan ZA,Heenan TMM.Probing the structure-performance relationship of lithium-ion battery cathodes using pore-networks extracted from three-phase tomograms.J Electrochem Soc2020;167:040528

[43] Roh Y,Kim E.Highly improved thermal stability of the ceramic coating layer on the polyethylene separator via chemical crosslinking between ceramic particles and polymeric binders.Chem Eng J2022;433:134501

[44] Feng Z,Sun D,Wang H.In-situ formation of hybrid Li₃PO₄-AlPO₄-Al(PO₃)₃ coating layer on LiNi_0.8Co_0.1Mn_0.1O₂ cathode with enhanced electrochemical properties for lithium-ion battery.Chem Eng J2020;382:122959

[45] Kim M.Inorganic thin layer coated porous separator with high thermal stability for safety reinforced Li-ion battery.J Power Sources2012;212:22-7

[46] Liu T,Chesneau F.Surface phenomena of high energy Li(Ni_1/3Co_1/3Mn_1/3)O₂/graphite cells at high temperature and high cutoff voltages.J Power Sources2014;269:920-6

[47] Jin X,Zhang X.Transferring liquid metal to form a hybrid solid electrolyte via a wettability-tuning technology for lithium-metal anodes.Adv Mater2022;34:e2200181

[48] Shin WK,Kim DW.Effective suppression of dendritic lithium growth using an ultrathin coating of nitrogen and sulfur codoped graphene nanosheets on polymer separator for lithium metal batteries.ACS Appl Mater Interfaces2015;7:23700-7

[49] Xiong C,Gao J.One-spot facile synthesis of single-crystal LiNi_0.5Co_0.2Mn_0.3O₂ cathode materials for Li-ion batteries.ACS Omega2020;5:30356-62 PMCID:PMC7711684

[50] Li J,Cao C.LiNi_1/3Co_1/3Mn_1/3O₂ nanoplates with {010} active planes exposing prepared in polyol medium as a high-performance cathode for Li-ion battery.ACS Appl Mater Interfaces2014;6:5075-82

[51] Kim D,Yu B.Amine-functionalized boron nitride nanosheets: a new functional additive for robust, flexible ion gel electrolyte with high lithium-ion transference number.Adv Funct Mater2020;30:1910813

[52] Yang LY,Liang WH,Wu DY.Effects of the separator MOF-Al₂O₃ coating on battery rate performance and solid-electrolyte interphase formation.ACS Appl Mater Interfaces2022;14:13722-32